Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.
1126～1140 item / All 2368 items
Simple, low wiring, space-saving, ultra-compact gripper controller.
By using Atom-G1, a robot hand can be simply created. ○Features○ ≪Ultra-compact gripper controller≫ ・Simple, low wiring, space-saving ・With encoder feedback ≪Multi-axis control via high-speed serial RS485 communication≫ ・MAX: 625Kbps high-speed communication ・Up to 31 axes can be connected ≪Smooth control with S-curve acceleration and deceleration control≫
Data protection is thorough! Positioning controller compatible with AC servo motors from various manufacturers.
The "BMC2XH Series" is a positioning controller for two or more axes. It integrates two axes with the high-speed serial communication type positioning controller "Fics Series" or "LMC Series" and the AC servo positioning driver "Atom Series." With RS485 serial communication control, it is possible to expand motor control to 16 axes. Additionally, data management can be performed using a USB memory via a programmable terminal. 【Features】 ■ Low-cost 2-axis AC servo controller ■ Digital I/O: Standard equipped with 38DI/32DO ■ Compatible with various AC servo motors ■ RS485 serial communication control: Supports 2 to 16 axes ■ SRing serial communication control: Supports 2 to 8 axes *For more details, please refer to the PDF materials or feel free to contact us.
By using a PLC direct access controller, you can build an inexpensive, simple, and highly reliable motion network under the PLC.
The "PLC Direct Access AE-LINK Motion Controller PI Series" does not require a positioning unit for the PLC to use the NC positioning function of the AE-LINK compatible driver software. Additionally, by using the motion program on the PI side, there is no need to directly write motion-related descriptions in the ladder program, which reduces concerns about the ladder program. The motion program built into the PI is executed while accessing the PLC's data registers. Motor control is performed through operations on the PLC's data registers. For more details, please download the catalog or contact us.
Compact, high-power 4-quadrant PWM servo controller for DC motors.
ESCON is a compact, high-power 4-quadrant PWM servo controller for permanent magnet DC motors. The operating modes can be selected from speed control (closed loop), speed control (open loop), and current (torque) control, meeting a wide range of requirements. The ESCON servo controller is designed for command via analog voltage, and various analog and digital I/O functions can be configured. 【Features】 ○ Capable of operation in a wide range of drive systems with diverse operating modes ○ Speed feedback sensor ○ Each input and output can be configured for various functions ○ Ramp function determines acceleration and deceleration in speed control mode (both closed and open loop) ○ Speed comparator: outputs to digital output when the set speed is reached For more details, please contact us or refer to the catalog.
Can be installed without modifying existing gas lines with a standard 3-inch footprint!
The "1179C" is a versatile mass flow controller compatible with various applications. It has a full-scale range from 10 sccm to 20 sim and enables high-speed, highly reproducible flow control down to a low flow rate of 0.2 sccm. Additionally, by connecting a compatible pressure transducer, it can also be used as a pressure control device. It can be directly replaced with most common MFCs. The electrical connector is a D-sub connector with the same pin configuration, signals, and functions as industry standards, eliminating the need for changes to cables or connectors. It is compatible with MKS and other manufacturers' MFC power supplies and displays. 【Features】 ■ Supports demanding processes ■ Excellent zero stability due to patented sensor design ■ Accurate and highly reproducible flow measurement and control across a full-scale range of 10 sccm to 20 sim ■ Analog accuracy at full scale in percentage ■ Reduced downtime with fast warm-up ■ Compatible with other MKS MFCs and power readouts *For more details, please refer to the PDF document or feel free to contact us.
Built-in user interface allows for easy changes to range and gas type, reducing inventory!
The "Type GM51A" is a mass flow controller with a metal seal of 1.125" (28.6mm) width, suitable for a wide range of applications, with a full-scale flow rate of 5sccm to 50slm converted to N2. It combines a proven patented thermal sensor design with digital flow control electronics. With digital control electronics using the MKS control algorithm, it provides a standard response time of 500 msec and a fast, highly reproducible response to flow set points. It can be used in a multi-range for various gas types with a full-scale flow rate of 5sccm to 50slm converted to N2. Parameters for over 100 types of gases and gas mixtures are already registered in memory. The electropolished metal seal makes it suitable for high-purity process applications. 【Features】 ■ Excellent zero stability due to patented thermal sensor design ■ High precision and accurate process control at a set point of 1% (calibration gas) ■ Built-in user interface ■ Easy to change range and gas type, reducing inventory ■ In-situ equipment monitoring and data collection possible *For more details, please refer to the PDF document or feel free to contact us.
Equipped with Trellix whitelist-type security software as standard. A palm-sized embedded PC for IoT edge computing.
The CPS-BXC200 is a completely fanless box computer equipped with an Intel Atom E3950 (Apollo Lake) processor and uses an M.2 card as the boot device. It comes standard with whitelist-type security software. By connecting a rich variety of I/O modules designed for the CONPROSYS(R) series stack type to the CPS-BXC200, functionality can be expanded, including digital input and output. It can also be mounted on a 35mm DIN rail. The CPS-BXC200 can be utilized on the Edgecross open platform, and when combined with the rich I/O modules of the CONPROSYS(R) series stack type from Contec, it enables data collection from sensors and switch circuits that do not support industrial networks. 【Main Features】 ● Secure IoT device for edge computing ● Three Gigabit LAN ports interconnect different network layers ● Wide temperature range support with guaranteed operation from -20 to +60℃ ● Fanless design reduces maintenance inspection tasks
By retrofitting an IoT gateway to the equipment/device, we can analyze the collected data to identify inspection defects and equipment anomalies.
【System Overview】 We connect existing old equipment with newly introduced new equipment via a network to remotely monitor the operational status of the entire production line and processing results in the factory. Using the IoT gateway "CONPROSYS series," we integrate communication between equipment within the factory using the field network standard "OPC UA," as recommended by Industry 4.0, and monitor the overall operation of the factory with HMI software. 【Recommended Products】 ● M2M Controller Series Easily build an IoT environment. Flexible configurations are possible depending on installation location/wiring methods and the number of I/O points. ● M2M Gateway Series Supports multi-vendor compatibility to IoT-enable PLCs and CNCs. Data collection from multiple PLCs is possible with a single device. ● PAC Series Complies with international standard IEC 61131-3 and supports CODESYS programming. Packed with necessary functions for manufacturing to build open systems. ● HMI/SCADA Software CONPROSYS HMI System Data collection and control through various IoT gateway devices. Easily build and operate monitoring and management systems for various applications.
It is a system that uses an IoT gateway to collect water level and equipment status signals for remote monitoring.
【System Overview】 This is a system for collecting water level and equipment status signals for remote monitoring. By gathering data on a cloud server, it is possible to collectively check information from various locations at the management office. We collect the opening and closing status of rivers and sluices, pump operation information, and interlock signals through various sensor information. Additionally, water level information is obtained via analog input and sent to the cloud server. The management office can also be equipped with the functionality to make judgments on the situation and perform remote operations as necessary. 【Recommended Products】 ● M2M Controller Series Easily build an IoT environment. Flexible configurations are possible depending on installation location/wiring methods and the number of I/O points. ● HMI/SCADA Software CONPROSYS HMI System Data collection and control through various IoT gateway devices. Easily build and operate monitoring and management systems for various applications.
This system uses an IoT gateway to centrally manage the operational status of the gas cogeneration system at a centralized management center.
By collecting data from gas engines and gas turbines, we achieve rapid and accurate repair responses during failures and prevent failures before they occur. By collaborating with a data server, monitoring alongside other equipment at a centralized management center becomes possible. By collecting operational information and utilization rates, this data is used as a benchmark for maintenance planning. 【Recommended Products】 ● M2M Controller Series Easily build an IoT environment. Flexible configurations are possible depending on installation location, wiring methods, and the number of I/O points.
Collect information from various sensors using an IoT gateway to visualize the environment. By semi-automating advanced know-how and labor-intensive tasks, we achieve a reduction in burden.
【System Overview】 This system incorporates the IoT gateway "CONPROSYS PAC Series" to achieve semi-automation in melon cultivation. It collects information from various sensors to visualize the environment. By using the CONPROSYS PAC Series, we address the challenges faced in melon cultivation, such as advanced know-how and labor-intensive tasks. Semi-automating processes like irrigation and drainage, opening and closing ceiling windows, and controlling boiler heating significantly reduces labor costs. 【Recommended Products】 ● PAC Series Compliant with international standard IEC 61131-3, supporting CODESYS programming. Packed with essential features for manufacturing industries to build open systems.
If you prepare a heater and a temperature sensor (K thermocouple), anyone can control the temperature.
This is a portable controller that can control up to 10 kW at 200V three-phase. (There is also a version for single-phase 200V.)
Standard equipment for temperature control, abnormal detection, and overheat prevention up to 10kW at 200V for three-phase systems.
High-precision temperature control is possible with heaters up to 10kW at 200V three-phase, using simple operations. The temperature of the heated object and the heater are monitored by separate sensors, ensuring safety through abnormal temperature detection of the heated object and overheating prevention of the heater. 【Features】 - High-precision temperature control of heaters up to 10kW at 200V three-phase with simple operation - Combination of temperature setting, slope (temperature gradient), and timer function for simple program operation - Retains setting data even when the power is off. The same operation can be performed again when the power is turned back on - PID thyristor control operation. On-off operation (two-position operation) is also possible with setting changes *For product details, please refer to the documentation. Feel free to contact us with any inquiries.
No need to replace the bellows! Universal controller with self-holding and automatic return operation method.
The "MKL" is a general-purpose controller that features a neutral lock push-button release type and a neutral lock handle push-down release type. Please feel free to contact us if you have any requests. 【Specifications (excerpt)】 ■ Operating angle (from neutral): Maximum ±30° ■ Operating force: 14.7N or less (at handle height of 170mm) ■ Mounting screws: 4-M6 (not supplied) ■ Terminal screws: M4 pan screws ■ Number of contacts: From 2 contacts to a maximum of 8 contacts *For more details, please download the PDF or feel free to contact us.
