Takasago's quantitative dosing pump standard test conditions
Introducing the standard test conditions for quantitative dosing pumps, including piping conditions, driving conditions, and measurement conditions!
Here are the standard test conditions for the "Quantitative Discharge Pump" from Takasago Electric Industry. 【Piping Conditions】 ■ Use fluororesin tubes with diameters of φ2×φ3 for piping connections. ■ The piping length for the primary side (IN) is set to 1000mm, and for the secondary side (OUT) to 100mm. ■ The tank for the fluid should be installed below the product, with the height of the primary side port (IN) set at 500mm from the liquid level. ■ The height of the end of the secondary side (OUT) piping should be at a horizontal position of 0mm. ■ A nozzle that reduces the piping diameter should be attached to the end of the secondary side (OUT) piping according to the set discharge amount. (If the discharge is set low and the piping diameter is large, the liquid may not discharge in one cycle due to the effects of surface tension and other factors.) 【Discharge Amount and Nozzle Attachment Guidelines】 ■ Set discharge amount (mm3): 10–50/50–100/100 or more ■ Diameter of the nozzle used (mm): 0.5/1.5/no nozzle *For more details, please refer to the PDF document or feel free to contact us.
- Company：高砂電気工業
- Price：Other
![[For Battery Manufacturing] PLBF: High-Precision Supply Pump](https://image.mono.ipros.com/public/product/image/24844/IPROS14395466797069583158.jpg?w=280&h=280)
![[For medical devices] Micro liquid delivery Q at a rate of 0.01 ml/min.](https://image.mono.ipros.com/public/product/image/24844/IPROS8833245919249101748.jpg?w=280&h=280)
![[For Research Institutions] 0.01ml/min Unit Micro Liquid Delivery Q](https://image.mono.ipros.com/public/product/image/24844/IPROS3923157055967982809.jpg?w=280&h=280)
