ring Product List and Ranking from 41 Manufacturers, Suppliers and Companies

【Processing results available】 Thread cutting chamfering

Introducing the benefits of the screw cutting process! We have experience in screw cutting and chamfering processing.

Our company has experience in thread cutting chamfering processing. In thread cutting, it is necessary to create a relief groove at the end of the thread, but establishing a relief groove can reduce strength and increase the risk of breakage. Therefore, we would like to introduce the benefits of a processing method that chamfers the end of the thread, eliminating the need for a relief groove. 【Processing Benefits】 "By chamfering, it is no longer necessary to create a neck that is narrower than the inner diameter of the thread at the incomplete thread section at the end of the thread, which increases the strength of the thread and reduces negative impacts on seals." Masakatsu Yamagishi, (1986) Introduction to NC Machine Tools (Illustrated) p.100. Tokyo Denki University Publishing. *For more details, please feel free to contact us.

Company：原田鉄工所
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Catalog of reverse engineering and wire harness technology.

If you have inquiries about reverse engineering, powertrain, wire harness, jigs, prototypes, industrial machinery, or machine tools, please contact us for a catalog.

We are ready to expand the technology we have cultivated over 30 years in the automotive industry to other sectors. We are a group of experts specializing in powertrains and wire harnesses. Since our establishment in 1985, Mobitech has built trust and a solid track record at the forefront of manufacturing, continuously evolving development and design alongside the growth of the automotive industry. 【What We Can Do】 Powertrain / Wire Harness / Reverse Engineering / Digital Engineering / Jigs, Prototypes, Production Equipment, Machine Tools *For more details, please download our catalog or feel free to contact us.

Company：モビテックテクニカルセンター
Price：Other

Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Attention engineers who are struggling without drawings or CAD designs despite having the product!

Reverse engineering of mold parts is possible! *Flyer with examples available.

Reverse engineering refers to the process of restoring an existing product. It is carried out when there is a product but no drawings or CAD files available. When you have a product but lack drawings or CAD files, please make use of reverse engineering. 【Procedure】 ■ Meetings are extremely important. This is because the cost can vary significantly depending on how detailed the intended use is, how rough the design can be, and what tolerances need to be included. *For more details, please contact us or download the PDF to view.

Company：タチバナ製作所
Price：Other

Other contract services
Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Reverse engineering based on 3D scan data.

I will introduce two methods of reverse engineering based on 3D scan data.

There are various methods for reverse engineering, and the choice of method affects the output data. Therefore, it is necessary to select the optimal method according to the purpose of data use and required accuracy. We will introduce two methods of reverse engineering based on 3D scan data, along with their procedures and characteristics. <Reverse Engineering Based on Cross-Sectional Contour Shape> [Step 1] Acquisition of shape data (point cloud data) using a laser scanner. [Step 2] Polygonization and mesh correction. [Step 3] Modeling is performed using 3D modeling software and 3D CAD software. A sketch of the cross-section is created on a reference plane, and solid shapes are generated using functions such as extrusion and rotation. <Reverse Engineering Based on Surface Shape> [Step 1] Acquisition of shape data (point cloud data) using a laser scanner. [Step 2] Polygonization and mesh correction. [Step 3] Modeling is performed using 3D modeling software and 3D CAD software. A surface that fits the mesh to the surface shape is created for all surfaces to generate a solid shape.

Company：MTI.Network
Price：Other

Processing Contract
Contract measurement
3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Model-Based Systems Engineering (MBSE)

We will support you from requirements analysis of the specifications to the construction of a virtual environment using MBSE.

MBSE (Model-Based Systems Engineering) refers to systems engineering that progresses using models. It is particularly being adopted in complex and large-scale system development in areas such as automotive, aerospace, defense/military, and railways. It enables efficient product development while conducting simulations using mathematical models. 【Assumed Challenges】 - We want to apply MBSE in system development to reduce market defects, but we have limited knowledge and insufficient personnel. - We cannot conduct comprehensive normal tests and stress tests because there is no system design document. - There are no designers who understand the interconnection specifications between ECUs. - We are limited to tests that can only be conducted using vehicles. 【Assumed Benefits】 - It is possible to handle everything from requirements analysis to system testing in a seamless manner. - Output of system design documents using SysML (not in natural language). - It is possible to build a system verification environment based on the system design document. - Efficient identification of defect locations is possible using the verification environment.

Company：テクノプロ　テクノプロ・デザイン社【東証プライム上場グループ】
Price：Other

Other Auto Parts
Other assembly machines
Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Custom Curry Filling Made to Order

Leave the custom curry filling to us! We will assist you in developing products that meet the diverse needs of consumers.

At Taka Foods, we create custom "fillings" for your original products. If you have concerns such as "we can't make large quantities in advance," "there's a risk of heavy labor-related accidents," or "the quality is inconsistent," please feel free to consult with us. We will assist you in developing products that meet the diverse needs of consumers. 【Process until delivery】 ■ Meeting with our sales team (discussing desired formulation, flavor, and content) ■ Table sample trial production (retrial until you are satisfied) ■ Final decision ■ Full-scale production on the line ■ Complete shipment (approximately 3 weeks after order) *For more details, please refer to the PDF document or feel free to contact us.

Company：タカ食品工業関東支社
Price：Other

OEM
Other contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

UV Sterilization and Deodorization Device "LED PURE"

Introducing a UV sterilizer and deodorizer that removes pollen and ultrafine particles! It also kills bacteria and has deodorizing effects.

"LED PURE" is a UV sterilization and deodorization device that has sterilizing and deodorizing effects. It can be installed and used in hospital patient rooms, nursing homes, hotel guest rooms, and similar spaces. The near-ultraviolet LED with a wavelength of 365 nm acts on the filter (photocatalyst) to thoroughly decompose and deodorize odors. Furthermore, the HAPA filter removes not only pollen but also ultra-fine particles, effectively addressing PM2.5 dust prevention. 【Features】 ■ Sterilizes bacteria such as influenza viruses ■ Thoroughly decomposes, deodorizes, and sterilizes odors ■ Removes pollen and ultra-fine particles ■ Eliminates chemical substances that can cause health hazards ■ Energy-efficient, long-lasting, and economical ■ Safe and secure, does not emit harmful ozone *For more details, please refer to the PDF document or feel free to contact us.

Company：αTM・ウェーブカスタマーサービスオフィス
Price：Other

Other safety and hygiene products
others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

5G splitter

Frequency 700–6000MHz! A power splitter with 300W power that has 3-way and 4-way distribution.

This product is a power splitter that can be used for 5G. We offer models with different distribution numbers: "WAD-07/5-3" and "WAD-07/5-4." It is used by wireless communication equipment manufacturers and others. Please feel free to consult us when you need assistance. 【Features】 ■ High-quality product ■ More affordable than the market price *For more details, please refer to the PDF document or feel free to contact us.

Company：αTM・ウェーブカスタマーサービスオフィス
Price：Other

Communications

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Orifice Block "OB Type"

A welding connection type that is more resistant to leakage is also available! Two types of differential pressure extraction methods can be selected.

The "OB type" is an orifice block used for fluids that are high temperature, low temperature, high pressure, and prone to leakage. Similar to the "orifice ring," there are standard wafer types that are easy to install and replace, as well as welded connection types that are more resistant to leakage. The differential pressure extraction method can be either corner tap or flange tap. 【Orifice Types】 ■ Concentric sharp edge orifice ■ Quadrant orifice ■ Eccentric orifice ■ Notched orifice *For more details, please refer to the PDF document or feel free to contact us.

Company：フローエンジニアリング
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal Ring Manufacturing Technology "Bender Method"

High quality, high yield, and low cost are its features!

The "Bender Method" is a manufacturing process for metal rings that utilizes cold bending and welding techniques. After cold rolling round steel into long steel materials, it is bent to a specified diameter, then spirally bent and stacked, cut into individual pieces, and welded to form a true circular ring. The yield of raw materials is 95%, resulting in minimal material loss. In the process of forming true circular rings through cold rolling → bending → cutting → welding → heat treatment → straightening, the Bender Method finishes metal rings with a roundness of within 0.5mm. *For more details, please feel free to contact us.

Company：ベンダ工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal Etching Device [Copper] Sheet Type | NSC Engineering

High-precision etching of a wide range of products from thin plates to thick plates is possible! Quality is determined by optimal spraying conditions.

The copper plates that have been pattern-turned are transported horizontally while lying flat, and the etching solution is sprayed onto them, enabling copper etching processing for both thin and thick plates. 【Features of Our Equipment】 ■ Etching shapes on both sides are equivalent ■ Gloss finish on the etching cross-section is possible ■ Low cost due to liquid management and liquid regeneration system ■ Capable of transporting materials with a thickness of 50μm due to the latest technology ■ Designed with a focus on chemical resistance for long-lasting equipment ■ Complete safety interlock system ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ Example of Processing 【Product】2mm thick copper 【Dimensional Accuracy】・L/S=3/2mm ・Taper width during single-side etching is approximately 0.5mm ・Taper width during double-side etching is approximately 0.25mm 【Main Chemical】Ferric chloride ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ 【Notes】・Proposal, design, and manufacturing are possible from the development prototype

Company：NSC エンジニアリング本部
Price：Other

Other surface treatment equipment
Surface treatment contract service
Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal Etching Device [Stainless Steel] Sheet Type | NSC Engineering

High-precision etching of a wide range of products from thin plates to thick plates is possible! Quality is determined by optimal spraying conditions.

The stainless steel plates that have been patterned are transported horizontally while lying flat, and the etching solution is sprayed onto them, enabling the etching process for stainless sheets ranging from thin to thick. 【Features of Our Equipment】 ■ Etching shapes on both sides are equivalent ■ Low cost due to liquid management and liquid regeneration system ■ Capable of transporting materials with a thickness of 50μm thanks to the latest technology ■ Designed with a focus on chemical resistance, ensuring long-lasting equipment ■ Complete with safety interlocks ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ Example of Processing 【Product】 Thickness 0.1mm 【Dimensional Accuracy】 L/S=0.1/0.1mm 【Main Chemical】 Ferric Chloride ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ 【Notes】 - Proposal, design, and manufacturing are possible from the development prototype

Company：NSC エンジニアリング本部
Price：Other

Other surface treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Immersion Vibrating Electrolytic Polishing Machine | NSC Engineering

We will provide the 'electrolytic polishing device,' 'dedicated electrode jig,' and 'electrolytic polishing solution' as a package.

The "EP-IS Series" is an automatic electro-polishing device that incorporates unique features for immersion electro-polishing. During the electro-polishing process, oxygen and hydrogen gases generated are stirred using a unique liquid agitation method, achieving high-quality electro-polishing under optimal processing conditions. 【Target Audience】 - Customers who want to in-house their electro-polishing - Customers engaged in electro-polishing who wish to improve efficiency by introducing automatic devices 【Features】 ■ The material surface becomes chromium-rich, enhancing corrosion resistance ■ Surface roughness is improved, reducing sliding resistance ■ Gloss is achieved ■ Custom electrode jigs can be made to match product shapes ■ Fully automatic electro-polishing with the push of a button ■ Designed with chemical resistance in mind, ensuring long-lasting equipment ■ Complete safety interlock system ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ 【Processable Materials】SUS304, SUS304L, SUS316, SUS316L 【Non-processable Materials】SUS430 series, all magnetic materials, aluminum, titanium alloys ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ 【Notes】 - If the purpose is deburring, burrs of about several tens of microns can be removed.

Company：NSC エンジニアリング本部
Price：5 million yen-10 million yen

Other surface treatment equipment
Wafer processing/polishing equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Split seal ring

Completely dry running possible! Split seal ring that seals both rotation and vibration with low friction.

The product is a split seal ring that can be used in direct contact with a gap or without contact. It seals both rotation and vibration with low friction. It accommodates a wide range of ring sizes and is made from materials compliant with FDA, WRAS, and API685 standards. Our mechanical carbon offers products utilizing specialized technology for both soft and hard sliding materials. 【Features】 ■ Suitable material selection ■ Completely dry running capable ■ Excellent chemical resistance ■ Materials compliant with FDA, WRAS, and API685 standards ■ Compatible with a wide range of ring sizes *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

Company：シュンク・カーボン・テクノロジー・ジャパン
Price：Other

Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Teflon capsule O-ring

Produced from high-quality raw materials! It has excellent performance with compression permanent deformation and cold flow.

This product is an O-ring with a core material made of silicone or Viton, coated with seamless and uniform Teflon FEP or PFA. Compared to PTFE O-rings, it has superior performance in terms of compression set and cold flow. Additionally, it offers performance nearly equivalent to power fluoropolymer elastomer O-rings while being cost-effective. 【Features】 ■ Seamless and uniform Teflon FEP or PFA coating ■ Compliant with FDA (Food and Drug Administration) regulations and others ■ Available in common round shapes as well as square and rectangular shapes ■ A wide variety starting from a minimum I.D of 5.6mm (silicone core 1.5mm) *For more details, please refer to the PDF document or feel free to contact us.

Company：ギャリング
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ring Product List and Ranking from 41 Manufacturers, Suppliers and Companies

ring Manufacturer, Suppliers and Company Rankings

ring Product ranking