Contract Services Product List and Ranking from 520 Manufacturers, Suppliers and Companies

Overseas Manufactured Parts and Products Evaluation Service

Some overseas manufactured parts and products may have quality issues. We provide quality evaluation services for reliability testing and assessment for these.

Some overseas manufactured parts and products may initially operate without issues, but can cause malfunctions and lead to failures and breakdowns in a short period of time. Before adopting or using overseas products, please consider AIT's parts and product quality evaluation services. ■ Examples of overseas parts evaluation - Reliability evaluation during the parts procurement and selection stage - Comparative evaluation between parts and product manufacturers - Reliability evaluation when replacing current parts with alternative parts (cost reduction) ■ Examples of applicable parts - Active components (transistors, diodes, thyristors, etc.) - Passive components (capacitors, resistors, etc.) - LCDs - Circuit boards - Power supplies - Etc.

Company：アイテス
Price：Other

Contract Inspection
Testing Equipment and Devices
Other inspection equipment and devices
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ESD (CDM) Testing Outsourcing Service

Reliable application with the contact confirmation function of the applied pin! Compatible with direct charging method and electric field induction method.

The "ESD (CDM) Testing Contract Service" evaluates the resistance to damage caused by ESD (Electrostatic Discharge) according to device charging models, which are important for the reliability of semiconductor products and electronic components that include them. It supports both the Direct Charge Method (Direct CDM) and the Field Induced Method (Field Induced CDM). Additionally, it is possible to determine damage through diode characteristic evaluation methods and other characteristic assessments (using separate equipment). 【Features】 ■ Compatible with various standard conditions such as JEDEC, JEITA (EIAJ also acceptable), and AEC through unit exchange ■ Supports both the Direct Charge Method (Direct CDM) and the Field Induced Method (Field Induced CDM) ■ Also compatible with the Direct Charge Method and Field Induced Method of AEC-Q100-011 ■ Damage determination is also possible through diode characteristic evaluation methods and other characteristic assessments ■ Ensures reliable application through contact confirmation function of applied pins *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテス
Price：Other

Contract measurement
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ESD (HBM・MM) Testing Contract Service

From DUT board production to testing! We propose and conduct tests according to your requests and objectives.

The "ESD (HBM・MM) Testing Service" evaluates the resistance to damage caused by ESD using the Human Body Model and Machine Model, which are important for the reliability of semiconductor products and electronic components that include them. We accommodate products such as IC modules, semiconductor products, and subsystems with up to 512 pins. We conduct tests in accordance with major domestic and international standards such as ESDA/JEDEC, JEITA, AEC, and IEC. Additionally, if there are issues with resistance, we assist in problem-solving, including failure analysis and root cause investigation. 【Features】 ■ Supports products such as IC modules, semiconductor products, and subsystems with up to 512 pins ■ Partial support for products with more than 512 pins (consultation required) ■ Conducts tests in accordance with major domestic and international standards such as ESDA/JEDEC, JEITA, AEC, and IEC ■ Proposes and conducts tests tailored to customer requests and objectives ■ Assists in problem-solving, including failure analysis and root cause investigation, if there are issues with resistance *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテス
Price：Other

Contract measurement
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal shock test

Not only the joints of electronic components, but also the evaluation of fixed parts such as screws!

At AITES Co., Ltd., we conduct "Thermal Shock Testing." By repeatedly exposing samples to high and low temperatures, not only does stress occur due to thermal effects, but also due to the expansion and contraction of various parts. Repeated stress also adds to the overall stress. This test is conducted not only for the joints of electronic components but also for evaluating fixed points such as screws. 【Main Specifications of the Thermal Shock Testing Equipment】 ■ Internal dimensions: W650×H460×D370mm, Temperature range: -65 to 0/+60 to 200℃ ■ Internal dimensions: W650×H460×D670mm, Temperature range: -65 to 0/+60 to 200℃ ■ Internal dimensions: W970×H460×D670mm, Temperature range: -65 to 0/+60 to 200℃ *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテス
Price：Other

Testing Equipment and Devices
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] Differentiating Between Optical Microscopes and SEM

Comparing optical microscopes and SEM with the same sample! I will explain the advantages and disadvantages.

Optical microscopes and SEM (scanning electron microscopes) are commonly used for sample observation, but each has its own characteristics, so it is important to choose the appropriate device according to the purpose. In this document, we compare optical microscopes and SEM using the same sample and introduce the generally mentioned advantages and disadvantages. Please take a moment to read it. 【Contents】 ■ Features of Optical Microscopes ・ Advantages / Disadvantages ・ Recommended for this type of observation ■ Features of SEM (Scanning Electron Microscope) ・ Advantages / Disadvantages ・ Recommended for this type of observation *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテス
Price：Other

Contract Analysis
Other contract services
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Analysis Example by EDS] Bonding Interface of Cu Pad

It is possible to view the distribution of each element in two dimensions! This can also be effective when analyzing multilayer samples.

We would like to introduce a case study of EDS analysis at the Cu pad interface. In qualitative analysis (point analysis) and semi-quantitative analysis of intermetallic compounds, the concentration of contained elements is calculated by examining the intensity (count numbers) of each characteristic X-ray. For intermetallic compounds, it is possible to estimate the formed compounds based on the calculated concentration ratios. Additionally, in line analysis, it is possible to profile the concentration distribution of each element along a specified line in the SEM image, allowing for the observation of changes in element concentration at the analysis location. 【Features of EDS Analysis】 ■ Qualitative analysis (point analysis) and semi-quantitative analysis of intermetallic compounds - Concentration of contained elements is calculated by examining the intensity (count numbers) of each characteristic X-ray - Intermetallic compounds can be estimated based on the calculated concentration ratios ■ Line analysis - Concentration distribution of each element along a specified line in the SEM image can be profiled - Changes in element concentration at the analysis location can be confirmed *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテス
Price：Other

Analytical Equipment and Devices
Contract Analysis
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Co-extruded film Multi-Tron series

Environmentally friendly co-extruded multilayer film

We are developing a maximum of 7-layer co-extruded films. Original arrangements can be made as needed for environmental considerations, simplification of packaging manufacturing processes, cost reduction, and the addition of functionality.

Company：タマポリ
Price：Other

Chemicals
Packaging materials
plastic
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electrical design contracting services (IoT, discontinued products, wireless technology, system design)

Rapid response for prototype development! Electrical design outsourcing service for circuit design and evaluation (IoT, discontinuation, wireless, system design).

A service that proposes a system configuration to realize the product image envisioned by the customer, allowing for circuit design and evaluation to be outsourced (IoT, discontinued products, wireless, system design). [For more details, please download the catalog or feel free to contact us] ↓ ↓ ↓ ↓ ↓ ↓

Company：Wave Technology
Price：Other

Circuit board design and manufacturing
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Power supply design outsourcing service

Total coordination of product development is possible! Experienced engineers are available for consultations.

"Power Supply Design Contract Services" allows you to outsource the design and evaluation of custom power supplies, as well as the design of coils and system evaluation for wireless power transfer. We can accommodate a wide range from low power under 0.1W to high power in the kW range. We offer custom power supply design services tailored to your equipment's shape, size, custom input/output functions, and other requirements that cannot be met by standard power supplies. [Features] - Collaborate with customers to build specifications and functions - Enable the design of challenging custom power supplies by leveraging in-house core technologies - Design based on customer design standards and development rules - Partial outsourcing of design, such as only design and prototype implementation, or only evaluation, is also possible *For more details, please refer to the PDF document or feel free to contact us.

Company：Wave Technology
Price：Other

Circuit board design and manufacturing
Contract manufacturing
Other contract services
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Substrate layout design outsourcing service (artwork, substrate design)

I will perform circuit board layout design with abundant experience.

WTI is a design company capable of providing one-stop product development services, equipped with various technical engineers in fields such as structural and electrical engineering. We specialize in "circuit board layout design" that takes into account electrical and structural considerations, rather than just "artwork" that connects wires, contributing to quality and shortening lead times. We are well-suited for customers who are struggling with issues such as the inability to convey the intent of electrical design. 【Do you have any of these concerns?】 ■ Structural constraints are not understood ■ Immediate responses are not available ■ The intent of electrical design is not conveyed *For more details, please refer to the PDF materials or feel free to contact us.

Company：Wave Technology
Price：Other

Circuit board design and manufacturing
Embedded system design service
Printed Circuit Board
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reverse Engineering Plus: From Automotive, Medical, and Industrial to Consumer.

Accelerate the efficiency of design and development! If you can provide the actual product, all we need to do is wait for the output. Automotive, medical, healthcare, industrial, and various power supplies.

We offer contracted services for reverse engineering (reverse analysis/teardown). Our services are utilized across a wide range of fields, including automotive, in-vehicle systems, medical, healthcare, dental, industrial, consumer electronics, and various power supplies. We respond to various requests, such as advanced technology research on competitor products and analysis for discontinued (discon) products. (Examples: Layer extraction from sample circuit boards, creation of circuit diagrams, etc.) A key feature of our services is the ability to support your product development through our various offerings (design development, contracted evaluation). While considering your business plan, you can gain necessary ideas for development by utilizing outsourcing. Our services are used to enhance development efficiency. We also respond to requests for equipment characteristic evaluations, component costs, etc. Please consult us regarding development design based on investigation results. 【Service Overview】 ■ Circuit Investigation - Create circuit diagrams from actual circuit boards (create parts lists, layer processing, circuit diagrams) ■ Analysis - X-ray analysis - Pattern measurement - Cross-sectional analysis ■ Evaluation - Electrical characteristic evaluation - Observation - Equipment disassembly and processing *For more details, please refer to the PDF document or feel free to contact us.

Company：Wave Technology
Price：Other

Contract Analysis
Other contract services
Contract Inspection
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Custom power supply design contract service

Supports wireless power transfer! We will design a custom power supply that fits perfectly.

We offer a "Custom Power Supply Design Contract Service." Designing custom power supplies that fit perfectly. We support everything from circuit design, PCB design, to prototype evaluation, providing all the necessary pieces for power supply design. Of course, you can also entrust us with the entire design process. In addition, we can also handle power supply topology, design and prototyping of demo boards, coil design for wireless power transmission, and system evaluation. Please feel free to contact us if you have any inquiries. 【Service Overview】 ■ Custom power supply development ■ Design and prototyping of demo boards from power supply topology ■ Coil design for wireless power transmission and system evaluation *For more details, please refer to the PDF document or feel free to contact us.

Company：Wave Technology
Price：Other

Contract manufacturing
power supply
Circuit board design and manufacturing
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Differential Scanning Calorimetry (DSC)

DSC can evaluate the physical properties of a sample based on the heat changes that occur during heating.

DSC can evaluate the physical properties of a sample based on the heat changes that occur during heating. - It can confirm melting point, crystallization temperature, glass transition temperature, Curie point, specific heat, and more. - It can be applied to measure crystallinity, purity, reaction rate, and crystallization rate. - Measurements can be taken below the freezing point, allowing for the evaluation of free water and bound water.

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Contract Analysis
Contract measurement
Contract Inspection
Contract Services

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Weather resistance test

Weather Resistance Test

By changing the conditions of ultraviolet irradiation from carbon arc discharge, as well as the temperature, humidity, and water spray inside the chamber, it is possible to conduct accelerated testing of degradation that occurs due to outdoor use of products, parts, and materials, which takes a long time in nature.

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Contract measurement
Contract Services

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rental of the portable ultrasonic hardness tester Sono Dur3.

From small parts like screws and bolts to narrow surfaces of large gears! We offer a wide range of support.

Simply place it on the measurement area, and the results are displayed prominently on the monitor, making it easy to operate. It adopts the UCI method, allowing for the setting of test force and conversion to multiple hardness scales. *For more details, please refer to the catalog available for download below under "PDF Download." You can also request a quote through "Contact Us." Feel free to reach out.

Company：レックス
Price：Other

Testing Equipment and Devices
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-Channel Communication Reliability Evaluation Device "RTm-100 Series"

Measure the conduction resistance of circuit patterns, solder joints, etc., quickly and accurately!

The "RTm-100 Series" is a multi-channel conductive communication reliability evaluation device manufactured by J-RAS Corporation. It measures contact resistance in circuit patterns, solder joints, and more with high speed and precision. With a scan processing time of 50 milliseconds per channel, it can keep up with high-speed cycle testing even for multi-channel measurements. It employs semiconductor relays for the four-terminal network switching in linked channel scans, significantly improving long-term reliability compared to mechanical relay systems. Additionally, the compact housing can be expanded to accommodate up to 240 channels, allowing for flexible installation and easy mobility. It can also connect thermocouples for temperature data display and recording (optional). 【Features】 ■ High precision and high-speed measurement ■ High-speed scanning at 50 msec/channel: follows high-speed heat shock chambers ■ High precision & low noise: reliable data output ■ Four-terminal measurement cables: twisted pair / color-coded by channel ■ High reliability: does not use mechanical relays *For more details, please refer to the PDF document or feel free to contact us.

Company：Toki Commercial Co., Ltd.
Price：Other

others
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Voltage Insulation Reliability Evaluation Device "HVUα Series"

High-speed detection circuits with a few tens of nsec installed in all channels! Tester capable of low-noise measurement.

The "HVUα Series" is a high-voltage insulation reliability evaluation device manufactured by J-RAS Corporation. It is equipped with high-speed detection circuits capable of operating in the tens of nanoseconds across all channels, enabling more advanced reliability testing. It can detect partial discharge with a high-speed event measurement function of less than 100 nanoseconds. Each channel has its own power supply and individual control, allowing for different applied voltage settings across all channels. There are no mechanical relay scans, so there are no failures or troubles during continuous testing. Active guarding with triaxial cables enables low-noise measurements. 【Features】 ■ Detects partial discharge with a high-speed event measurement function of less than 100 nanoseconds ■ Each channel has its own power supply and individual feedback for stable voltage application to each sample ■ Individual short-circuit detection circuits for each channel can respond to instantaneous sample short circuits ■ Dedicated software allows for graph display and data recording ■ The system can be configured in units of five channels according to demand *For more details, please refer to the PDF document or feel free to contact us.

Company：Toki Commercial Co., Ltd.
Price：Other

others
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Real-time image processing circuit High-speed IF circuit Design achievements [Materials available]

Experience in both SoC and FPGA design! Capable of architecture design from image processing algorithms.

This document is a technical material that introduces our company's achievements in the design of real-time image processing circuits and high-speed IF circuits. In addition to examples of contracted design for image processing modules such as image processors for digital cameras and endoscope systems, it includes the contracted design flow from C models. It also contains implementation achievements of high-speed serial IFs such as HDMI 2.0, 12G-SDI, and USB 3.0. 【Contents (partial)】 ■ Real-time image processing requires HW implementation ■ Image processing achievements and design flow ■ Achievements in contracted design of image processing modules ■ Contracted design flow from C models (fixed-point model) ■ Contracted design flow from C models (floating-point model) ■ Implementation achievements of high-speed serial IFs (FPGA) *For more details, please download the PDF or feel free to contact us.

Company：ベリフィケーションテクノロジー横浜本社
Price：Other

Other image-related equipment
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Restrictive Mechanism Preference Testing Device 'FDB-300W/FDL-8D'

You can put different food in two feeders and conduct a choice test! The feeders can be removed and weighed.

The "FDB-300W/FDL-8D" is a restricted mechanism type preference testing device that allows for selection tests by placing different feeds in two feed boxes (each with individually controlled shutters). The feed boxes are removable and can be weighed. They have a large capacity and can accommodate multiple mice for breeding. It is autoclavable (high-pressure steam sterilization at 121°C for 20 minutes), and the software displays the settings for restrictions and the current status of the shutter openings and closings, as well as allowing for individual programming of all shutter operations. (Software is optional) 【Features】 ■ Allows for selection tests with different feeds in two feed boxes ■ Feed boxes are removable and can be weighed ■ Feed boxes have a large capacity for breeding multiple mice ■ Autoclavable (high-pressure steam sterilization at 121°C for 20 minutes) *For more details, please refer to the PDF document or feel free to contact us.

Company：メルクエスト
Price：Other

Other physicochemical equipment
Other laboratory equipment and containers
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic assessment contracted service

We can provide services for seismic evaluation of segments, shield pipeline assessment, opening evaluation, and contracted services for sewer pipelines!

Our company has been responding to requests for design and analysis outsourcing services primarily related to shield tunnels from general contractors, manufacturers, and consultants. In order to meet as many requests as possible, we have worked to establish an internal processing system and are now pleased to offer "contracted service" related to the following business contents. For more details, please contact us or download the catalog!

Company：ジオネットエンジニアリング
Price：Other

Other operation management software
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

環境モニタリング用スタンプ培地『γ線照射3重包装』

三極薬局方に準拠した製品を国内自社工場より、新鮮な生培地をお届けします！

～５つのこだわり～・安心してご使用頂くために Made in Japanにこだわりました！・ロック式シャーレで二次汚染を防ぐことにこだわりました！・長期間の常温での保存を可能にし、利便性にこだわりました！・偽陰性リスクを低減させ、確実な捕集にこだわりました！・作業効率を向上させるため、使い易さにもこだわりました！

Company：日本ベクトン・ディッキンソン品質管理・研究開発・注射剤の製剤研究・CMO
Price：10,000 yen-100,000 yen

Microbiology
Culture medium
Other quality control and hygiene measures
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

JIS K 7374 Imaging Tester 'ICM-2'

This one device measures both transmission and reflection, quickly assessing imaging properties. Long-lasting VI-LED light source.

The "ICM-2" is an imaging measurement device that measures the clarity of images reflected on the surfaces of objects, such as painted surfaces, and the sharpness of images that can be viewed through transparent films and plastics. It supports three conditions for transmission and reflection measurements (45°, 60°) with a single unit. The position and angle of the sample stage and the light receiver can be switched easily and accurately. Additionally, it can be operated and display measurement results using dedicated software for computers (compatible with Windows 11). 【Features】 ■ Significantly reduces measurement time (PAT.) ■ Compatible with both transmission and reflection ■ Long-lasting VI-LED light source ■ Operable from a computer *For more details, please download the PDF or feel free to contact us.

Company：早坂理工
Price：Other

Other electronic measuring instruments
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AU19027 5-axis automatic moving stage

Introducing a high-precision, position-controllable moving stage!

The AUC's "AU19027 5-Axis Automatic Moving Stage" is a high-precision device that allows for free fixation of the subject (test specimen/sample). Its gate-type structure does not interfere with shooting equipment or radio wave generation devices, making it easy to install. ■ Recommended for fixed-point photography of subjects ■ Capable of fixed-point irradiation experiments for radio towers ■ High-precision position control is possible ■ Pitch feeding / P to P control is possible The device can be customized and designed to meet customer specifications. We also offer a wide range of options. *For more details, please contact us or download the PDF materials for review.

Company：ＡＵＣ
Price：Other

Testing Equipment and Devices
Automotive catalyst evaluation test equipment
Ultraviolet irradiation equipment
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure manifold for SPE column 'PRESSURE+ 48'

Even highly viscous samples can be processed smoothly! Achieving a stable recovery rate!

"PRESSURE+ 48" is a pressurized sample processing manifold compatible with SPE columns in sizes of 1mL, 3mL, and 6mL. With a unique flow restrictor in an individually independent pressurization mechanism, it provides a uniform flow regardless of the sample's viscosity, achieving stable recovery rates. Additionally, samples are collected directly from the SPE column into recovery containers (test tubes). There is no need for cleaning needles or joints, eliminating concerns about contamination. 【Features】 ■ No cock required ■ No power supply needed ■ No joints, preventing contamination ■ Ideal for high-viscosity samples *For more details, please refer to the PDF document or feel free to contact us.

Company：バイオタージ・ジャパン
Price：Other

Other laboratory equipment and containers
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Memus Core Development Contracted Services

We are advancing the development and commercialization of new generation MEMS products.

We provide comprehensive support not only for individual processes but also for device design, simulation, principle prototyping, prototype device fabrication, and mass production. Additionally, through collaboration with external fabs and academic institutions, we offer valuable services that are highly competitive. We also possess unique processes specific to MEMS manufacturing (micromachining) that cannot be achieved with semiconductor process technology.

Company：メムス・コア
Price：Other

Contract manufacturing
Contract Services

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nano Printer "NM-0501"

Equipped with three types of nanoimprint functions! You can freely set the conditions for temperature and pressure.

The "NM-0501" from Meichang Engineering is a nanoimprint device developed to increase the semiconductor integrated circuit line width to the nano level in a simple and low-cost manner. It is equipped with three types of nanoimprint functions: thermal imprint, room temperature imprint, and optical imprint. The essential conditions of temperature and pressure for imprinting can be freely set. It allows for four consecutive transfers through a step-and-repeat method. 【Features】 ■ Flexible condition settings ■ Equipped with step-and-repeat functionality ■ Three types of nanoimprint functions - Thermal imprint - Room temperature imprint - Optical imprint (optional) *For more details, please refer to the PDF document or feel free to contact us.

Company：明昌機工
Price：Other

Printer
Commercial printers
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal and UV Hybrid Nano Imprinter 'NM-0801HB'

Slim size that can be placed anywhere! A hybrid type that combines thermal and UV methods in one unit.

The "NM-0801HB" from Meichang Engineering is a hybrid-type nanoimprint device that enables both thermal and UV imprinting in a single unit, making it ideal for experiments and development. It is equipped with three types of nanoimprinting functions: thermal imprinting, room temperature imprinting, and optical imprinting. Its slim size allows for installation in various locations. 【Features】 ■ Combines thermal and UV imprinting in one unit ■ Ideal for experiments and development ■ Hybrid type ■ Equipped with three types of nanoimprinting functions ■ Slim size that can be installed in various locations *For more details, please refer to the PDF document or feel free to contact us.

Company：明昌機工
Price：Other

Printer
Commercial printers
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

6-inch compatible nano printer 'NM-0403'

Bulk transfer of 6-inch wafers is possible! A servo press capable of transferring nanometer structures.

The "NM-0403" from Meichang Machinery can accurately transfer nanometer structures and is a servo press capable of batch transferring 6-inch wafers. It is equipped with three types of nanoimprint functions: thermal imprint, room temperature imprint, and optical imprint. As an option, it can be equipped with an aligner function to automate wafer alignment. 【Features】 ■ Flexible condition setting ■ Aligner function ■ Three types of nanoimprint functions - Thermal imprint - Room temperature imprint - Optical imprint *For more details, please refer to the PDF materials or feel free to contact us.

Company：明昌機工
Price：Other

Printer
Commercial printers
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DJK New Polymer Synthesis Research

We undertake commissioned research and development of new polymers, such as functional polymers and heat-resistant polymers, according to your requests.

Leveraging our long-standing experience as a specialized institution in polymer synthesis research, we undertake commissioned research for the development of new polymers tailored to various purposes and applications, including heat-resistant polymers, graft and block polymers, and functional polymers with introduced functional groups.

Company：ＤＪＫ
Price：Other

Other polymer materials
Contract Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contract Services Product List and Ranking from 520 Manufacturers, Suppliers and Companies | IPROS GMS

Contract Services Manufacturer, Suppliers and Company Rankings

Contract Services Product ranking