Molding Product List and Ranking from 35 Manufacturers, Suppliers and Companies

Plastic molding processing - Injection molding

Supports a wide range of diverse special molded products from 18t to 200t! Broadly developed general molded products, plated products, and more.

Kyoshin Seiko Co., Ltd. offers "plastic molding processing." We accommodate a variety of special molded products, including injection molding, two-color molding, and different material molding. In addition to automotive parts, we also provide a wide range of general molded products, plated products, printed products, and ultrasonic welded products for camera, video, and office equipment parts. 【Features】 ■ We cater to a variety of special molded products, including injection molding, two-color molding, and different material molding. ■ We offer a wide range of products, including automotive parts, office equipment parts, and ultrasonic welded products. ■ Available sizes: 18t to 200t *For more details, please refer to the PDF document or feel free to contact us.

Company：キョーシン精工
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic molding processing - Injection molding

Aiming for significant cost reduction, we collaborate with users for joint development! We will assemble up to the final product.

Kyoshin Seiko Co., Ltd. specializes in plastic molding processing. "Insert molding" is a method aimed at significantly reducing costs through joint development with users. We perform assembly of final products as integrated molded items with pressed and molded parts. In addition, we also accommodate a variety of special molded products such as injection molding, two-color molding, and different material molding. 【Features】 ■ Aiming for significant cost reduction through joint development with users ■ Assembly of final products as integrated molded items with pressed and molded parts ■ Accommodating a variety of special molded products such as injection molding, two-color molding, and different material molding *For more details, please refer to the PDF document or feel free to contact us.

Company：キョーシン精工
Price：Other

Circuit board design and manufacturing
Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spick Corporation Technical Introduction

We are conducting trial molding aimed at confirming the shaping properties!

At Spic Co., Ltd., we offer "form trial molding" aimed at confirming the formability using customer-developed carbon fibers, glass fibers, and other materials. In addition to carbon fibers and glass fibers, we also accommodate resins and composite materials. By using our owned molds, trials can be conducted without initial costs. We also accept requests for the production of thermoplastic carbon fiber reinforced plastic "CFRTP boards," so please feel free to contact us if you have any inquiries. 【Technology】 ■ Form trial molding ■ Production of CFRTP boards, etc. *For more details, please download the PDF or contact us.

Company：スピック
Price：Other

Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Possible from small lots 'molding'

For those struggling with small lot molding! Please consult us for a variety of small quantities or long-term small production!

At Miyoshi, we accept molding orders starting from a quantity of "1 piece." We address concerns related to small lot production, such as "the required quantity varies by month" and "there is a minimum order lot that must be met," by providing estimates for each quantity and delivering the necessary amount each month. Additionally, we also handle small quantities of various types, insert molding, and long-term storage of molds. As an internal record, the most common molding quantity per lot is approximately 100 to 1000 pieces. 【Features】 ■ Orders can be accepted from 1 piece ■ Specializes in small quantities of various types and insert molding ■ Capable of handling a wide range of products with 40t hard-type, 80t, and 230t horizontal injection molding machines ■ Product sizes typically range from 10mm square to A4 size × approximately 60mm ■ Long-term storage of molds is possible *For more details, please refer to the PDF document or feel free to contact us.

Company：ミヨシ
Price：Other

Contract manufacturing
Processing Contract
Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hybrid molding of in-mold transfer and sheet insert.

Achieving the best of both worlds with sheet inserts that have various optical functions and decorative transfer in-mold!

**Customer Development Needs** We received a request to propose a new in-vehicle CID (Center Information Display) cover for vehicle OEM manufacturers, designed in a dome-shaped 3D format that cannot be achieved with glass bending, and to include optical processing and design elements. **More Specific Requirements** To approach the quality of a high-grade glass cover, the front side was required to have an AR (Anti-Reflection) coating, AFP (Anti-Fingerprint) coating, and a hard coat, while the back side needed a hard coat for outgassing prevention from molded resin, along with decorative design elements. **Our Proposal** We proposed inserting a hard coat sheet with AR/AFP on the surface and believed that the requirements could be met through in-mold transfer on the back side. We established a hybrid molding method that combines both elements and supplied the product. **Customer Evaluation** The product was able to achieve a shape that is impossible to process with bent glass while incorporating low reflection and anti-fingerprint features, resulting in great satisfaction. Based on the adoption of this for the customer's promotional in-vehicle CID module front cover, proposal activities to vehicle OEMs have commenced.

Company：吉田テクノワークス本社
Price：Other

Organic EL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[30% Cost Reduction] Industrial Tray/Blister Pack Mold Design and Molding

By manufacturing molds in-house, we can reduce mold costs by up to 30%! We make no compromises on cost reduction and contribute to our customers' cost savings from every angle.

Our company is a manufacturer of vacuum forming. We handle recyclable packaging materials such as blister packs and parts trays. By manufacturing our own molds, we can reduce mold costs by 30% compared to traditional methods, and we can also reduce production costs by 10% to 15% at our factory in China! For cost reduction inquiries, please consult us regarding sheet procurement from overseas (Japanese) manufacturers. 【Strengths of Paxstar】 ■Reduction of mold costs - In-house mold manufacturing: Significantly reduces mold costs. - Mold management: We responsibly manage and store molds. ■Thorough cost reduction - Our accumulated experience + planning and proposal capabilities, along with unique overseas material procurement → Enables cost reductions that cannot be replicated by other companies! ■Quick response for short delivery times *Same-day shipping is possible for molding only. - In-house mold manufacturing significantly shortens delivery times. - With a rich inventory in-house, we will respond to requests as much as possible, even in emergencies. ■Support for small lot production - Small lot production is very welcome! - Orders can be accepted starting from a minimum of 1 piece. (However, a mold setup fee is required.) *For more details, please download the PDF or feel free to contact us.

Company：パックスター本社
Price：Other

Other packaging materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Consideration for people and the Earth: Supercritical MCF-RIM foamed molding (Reaction Injection Molding)

RIM foaming using inert gases. A technology that contributes to environmental conservation, enabling foaming of products that were previously unsuitable for foaming and creating reaction injection molded products that have never existed before.

**Characteristics of Supercritical Inactive Gas RIM Foaming Molding** - Bubbles are fine (a few micrometers) - High bubble density (over 10^9) - Weight reduction can be achieved with similar physical strength - Possesses high thermal insulation properties (low thermal conductivity) - Good high-frequency characteristics (low dielectric constant) - Fine-grained elastomer foaming - Good surface properties (control of skin layer is possible) - Control of independent and continuous bubbles is possible - Difficult to generate defects like shrinkage, allowing for flexible structural design of molded products such as ribs - Can shorten molding cycles - Does not use environmentally harmful foaming agents - No risks associated with explosive atmospheres - The cost of foaming agents is low

Company：プラステコ本社
Price：Other

Injection Molding Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding in an "ISO Class 1" clean booth.

Achieving injection molding within an ISO Class "1" clean booth! Mass production of polyester medical devices that are difficult to mold precisely!

Our company manufactures a wide range of polyester medical devices that are difficult to mold precisely within a "Class 1" clean room. In the design and production of injection molding molds for plastics, we create data using CAD/CAM and excel in machining and processing items with fine details and strict dimensional tolerances using a machining center capable of 40,000 RPM. We also accept engraving of numbers, letters, and marks on flat surfaces, cylindrical surfaces, and three-dimensional curved surfaces using NC engraving machines. 【Business Activities】 ■ Injection molding in a clean room ■ Design and production of molds ■ Mechanical engraving of letters and other designs *For more details, please request materials or view the PDF data available for download.

Company：旭彫刻工業
Price：Other

Plastic Mould
Contract manufacturing
Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tazawa Manufacturing Co., Ltd. Business Introduction

Small lot production is possible! Leave plastic injection molding and insert molding to us.

Our company is a plastic processing company that specializes in plastic injection molding, insert molding, mold prototyping, and test molding. From home appliances to automotive parts, we realize high-quality manufacturing that delights our customers. We also accept requests for mold prototyping and test molding, so please feel free to consult us about any minor details. 【Products Offered】 ■ Insert Molding - Metal Inserts - Net Inserts, etc. ■ Plastic Molding - Resin Molding - Silk Screen Printed Products *For more details, please download the PDF or feel free to contact us.

Company：田沢製作所
Price：Other

Contract manufacturing
Resin mold
Plastic Mould

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Withdrawable molding

Example of powder molding process

Molding Process Example 　*Lower punch fixed, die movable - Die rises from the original position to the filling position - Filling of the raw material - Die slightly rises *Underfill - Upper punch descends - Die floats - Die descends to the extraction position - Molding is completed with the upper punch rising

Company：タナカカメ本社／工場
Price：Other

Powder Molding Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rubber Molding - Types and Structures of Molds, Molding Methods and Issues

Introducing rubber molding methods, mold structures, finishing of rubber products, and defects observed in rubber products!

To shape rubber into a product form, a mold is necessary. Molds are created to match the shape of the rubber parts, and molding is carried out. In this column, we introduce the types of rubber molds, molding methods, finishing techniques for the molded products, and know-how on defects commonly seen in rubber products and their countermeasures. Please take a look at the related links. 【Contents】 ■ Molding methods and mold structures for rubber ■ Finishing of rubber products ■ Defects observed in rubber products *For detailed information on the column, please refer to the related links. For more information, feel free to contact us.

Company：ゴムノイナキ大高本社
Price：Other

Rubber
Rubber mold
Mold Design

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Kawai Seiko Co., Ltd. - Mold Manufacturing and Plastic Molding

Mold manufacturing technology backed by 40 years of experience.

■ High-efficiency and high-quality mold production using 3D data and high-speed machining We have established an internal network that connects CAD/CAM, machine tools, and on-site PCs, allowing for the sharing of 3D data and drawing data. We produce molds with a production system that emphasizes speed from design to machining and polishing. ■ Consistent production system from mold design to manufacturing and trial sample production We have achieved a consistent production system from mold design to trial sample production using our own molding machines, meeting high standards of quality and customer requirements. We flexibly accommodate customer needs, whether it is mold production only, parts processing only, or a comprehensive service from mold design to mass production molding. ■ Mass production of thermoplastic resin products using injection molding machines from 50 tons to 350 tons We own injection molding machines ranging from 50 tons to 350 tons, capable of mass-producing products weighing up to approximately 1 kg. We can also mass-produce nearly all thermoplastic resin products, including general-purpose plastics, engineering plastics, and super engineering plastics.

Company：カワイ精工
Price：Other

Resin mold

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to Layered Hot Stamping Molding

It is possible to achieve high-temperature molding, which is difficult with methods using electric heating wires or steam.

At Cap Co., Ltd., we perform laminated hot stamping molding using thermoplastic resin and carbon fiber woven fabric. We adopt a direct electric heating method for molds (Patent No. 5107417). By using molds capable of rapid heating and rapid cooling, molding can be completed in as little as 3 minutes. We can also mold complex shapes that are difficult with thermoplastic prepregs. 【Features】 ■ Direct electric heating method for molds (Patent No. 5107417) ■ High-temperature molding capability ■ Ability to mold complex shapes *For more details, please download the PDF or feel free to contact us.

Company：キャップ
Price：Other

Resin mold

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding

It is possible to plasticize and lighten materials in the same location!

■Injection Molding The principle of injection molding involves the process of filling a mold with rubber material that has been plasticized and kneaded by a screw within a heated cylinder at high speed and high pressure, and then curing it to create the product. This allows for the plasticization and measurement of materials to be carried out in the same location. Since injection into the mold is done at high pressure, the material that has been heated and kneaded in the screw cylinder experiences a rapid increase in temperature due to frictional heat, which shortens the curing time, making it suitable for mass production of products. Additionally, it facilitates the automation of the molding process for products with complex mold shapes or product designs. *For more details, please refer to the PDF document or feel free to contact us.*

Company：オカダイゴム
Price：Other

Injection Molding Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Molding Product List and Ranking from 35 Manufacturers, Suppliers and Companies

Molding Manufacturer, Suppliers and Company Rankings

Molding Product ranking