エーディーディー Product Lineup

Would you like to switch from "visual inspection" to "automated inspection using cameras" for checking issues such as missed installation of electronic circuit boards, incorrect component types, and missing parts? We would like to introduce a practical example of the "iVision Robot," which operates as an inspection device by attaching an inspection system to a general-purpose XY stage movement device. By using a two-dimensional operating stage, it becomes possible to confirm the mounting status of each individual board even when the same boards are lined up. 【Features of this system】 - It can automatically inspect for missed component installation, incorrect component types, and missing parts for each individual board. - The same boards are lined up, and inspection is conducted sequentially for each one. - Circuit status inspection can also be performed simultaneously. - The device can be modified according to the inspection requirements. *First, we will verify whether the work you wish to inspect can be accommodated. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

In the sorting of fruits and vegetables such as tomatoes spread out in a box based on size, why not switch from "visual inspection" to "automated inspection using cameras"? By installing cameras and lighting on a stand and using AI for judgment, this system allows for standard determination without measuring individually or using classification devices. By utilizing AI, it becomes possible to distinguish items like vegetables that have uneven measurements. 【Features of this system】 ■ A simple inspection system with cameras and lighting installed on the inspection stand ■ By using AI, it can determine size even for items with uneven color and surface conditions ■ The device can be modified based on the inspection requirements *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are included in the PDF.

• Image Processing Software

Regarding the confirmation of the warping condition of the circuit boards being transported on the line, would you consider switching from "individual measurement" to "automated inspection using 3D sensors"? By installing 3D sensors on the existing transport line and conducting measurements, we can create a system that checks the warping condition during transport without having to individually remove and inspect the circuit boards. By using 3D sensors, it becomes possible to measure the warping condition of the circuit boards passing under the sensor without the need to individually measure specific locations using calipers or gap gauges. 【Features of this system】 ■ Inspection can be performed on the transport line without creating a separate inspection system. ■ Since inspections are conducted on the transport line, it is possible to perform inspections without creating additional equipment. ■ By using 3D sensors, it is possible to measure the condition of the circuit boards without individual measurements. ■ The equipment can be modified based on the inspection requirements. *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are included in the PDF.

• Image Processing Software

Shall we switch the visual inspection of metal parts with height differences from "manual measurement" to "automated inspection using a camera"? We will introduce a practical example of the "iVision Robot," which enables dimensional measurement by installing a camera on a general-purpose XYZ stage moving device. By using a three-dimensional operating stage, the camera can be moved to the appropriate position for inspection at varying heights, allowing for sequential inspection of necessary areas and enabling the overall condition of parts with height differences to be confirmed. 【Features of this system】 - By having the camera and stage operate at multiple locations that cannot be captured in a single image, necessary areas can be sequentially imaged and inspected. - Inspection can be performed on parts with height differences, which are difficult to focus on with a fixed camera, by allowing the camera to operate in the Z-axis direction. - A map is displayed showing where and what types of defects were found. - The device can be modified based on the inspection requirements. *First, we will verify whether the workpieces you wish to inspect can be accommodated. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

Regarding the mistakes or absence of ingredients in the bento boxes being transported on the line, would you consider switching from "visual inspection" to "automated inspection using cameras"? By installing cameras and lighting on the existing transport line and utilizing AI, we can create a system that inspects for mistakes in the arrangement or presence of ingredients while they are being transported on the line. This system will also be able to identify irregular items, such as bento ingredients, which are difficult to distinguish with conventional inspection devices, by using AI. 【Features of this system】 ■ Inspection can be conducted on the transport line without creating a separate inspection system. ■ Since inspections are performed on the transport line, it is possible to conduct inspections without creating additional devices. ■ By using AI, inspections can be carried out for ingredients that do not have consistent shapes or colors. ■ The device can be modified based on the inspection content. *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information is provided in the PDF, including specifics and processing flow.

• Image Processing Software

Regarding the volume measurement of components being transported on the line, would you consider switching from "individual measurement" to "automated inspection using 3D sensors"? By installing 3D sensors on the existing transport line and conducting measurements, we can create a system that measures volume during transport without the need to individually extract and measure each component. By using 3D sensors, it becomes possible to measure the volume of components passing under the sensor without the need to measure specific locations individually with tools like calipers. 【Features of this system】 ■ Inspection can be conducted on the transport line without creating a separate inspection system. ■ Since inspections are performed on the transport line, it is possible to conduct inspections without creating additional equipment. ■ By using 3D sensors, volume measurement can be performed without individual measurements. ■ The equipment can be modified based on the inspection requirements. *First, we will verify whether the work you desire can be inspected. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

Would you like to switch the visual inspection of parts spread out on a work tray from "manual inspection" to "automated inspection using a camera"? We will introduce a practical example of the "iVision Robot," which installs a camera and lighting on a general-purpose XY stage moving device, enabling inspection over a specified area. By using a two-dimensional operating stage, it is possible to inspect the entire designated area for each specified section without having to set the camera position each time, allowing you to confirm where and what kind of defects were present. 【Features of this system】 ■ By using a two-dimensional operating stage, it is possible to sequentially inspect even large areas. ■ It indicates the coordinates of defects and displays a map showing where and what kind of defects were found. ■ The device can be modified based on the inspection requirements. *First, we will verify whether the workpieces you wish to inspect are suitable for inspection. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

iVision is an image processing visual inspection system that achieves high detection accuracy through high-performance software. This product is a system centered around software, but it is not just a standalone inspection software for sale; it is provided as a device that incorporates the software. With this approach, we can propose inspection devices in the desired form tailored to your site. Additionally, our staff will visit your installation location to handle the cumbersome initial setup, allowing for a seamless introduction without imposing any burden on you. Please check out our system and services, which are distinct from other inspection devices!! 【Features】 - Proven track record in various industries, including not only metals and plastics but also building materials, apparel, and food. - Supports automation of various inspections, from micro-sized to large components. - Available in various forms, from inline installations to standalone devices. - Reliable support to ensure you can utilize the inspection device immediately after installation. *For more details, please refer to the PDF materials or feel free to contact us.

• Image analysis software

Image processing appearance inspection using cameras instead of human eyes for analysis and processing! This is an essential technical document summarizing the benefits of automation and key points for implementation. Additionally, you can download a guide that explains the strengths of ADD, which has a proven track record in many industries, along with the implementation process. 【Introduction to Implementing Image Processing Appearance Inspection (From the Mechanism of Inspection Systems to Various Implementation Styles)】 ■ The significance and mechanism of implementing image processing appearance inspection ■ Styles of introducing appearance inspection equipment ■ Utilization of verification data ■ Capabilities of inspection equipment ■ Usage methods and specific examples, etc. → For an introductory guide on image processing appearance inspection that you may have been hesitant to ask about, please download the "Introduction to Image Processing (Integrated Edition)." 【What ADD Can Do】 ■ Strengths of ADD ■ Track record of implementation ■ Support with total systems ■ Reliable support available from the day after delivery ■ Process leading up to implementation → If you want to know about companies that have already implemented it or key points for introducing appearance inspection, please download the "Proposal for Image Processing Appearance Inspection System." *For more details, please refer to the PDF document or feel free to contact us.

• Image Processing Software

Regarding the inspection of defects such as chipped teeth and burrs on gears, as well as dimensional measurements like tooth width, would you consider switching from "visual inspection" to "automated inspection using 3D sensors and cameras"? We would like to introduce a case study of an inspection device that sets the gear on a rotating fixture and conducts inspection and measurement using 3D sensors and cameras while it rotates. By rotating the gear on the fixture and using 3D sensors and cameras to check the condition of the sides, it becomes possible to perform both tooth condition inspection and dimensional inspection simultaneously. 【Features of this system】 - Realization of an inspection device that can check the entire gear using a rotating fixture. - Compatible with various types of gears, including spur gears and helical gears. - The device can be modified based on the inspection requirements. *First, we will verify whether the workpiece you wish to inspect can be inspected. *Detailed processing information, including details and processing flow, is provided in the PDF.

• Image Processing Software

I want to read characters that are difficult to decipher due to printing defects or font issues!! With standard imaging, it becomes possible to read characters that are difficult to distinguish, such as those that are faded or partially missing, by applying various lighting and aligning the images. [Explanation booklet available] ADDI Co., Ltd. has extensive experience in developing inspection equipment, allowing us to accommodate a wide range of components. With this know-how, we can provide delivery solutions tailored to our customers' needs. "Our products are difficult to inspect automatically" or "We have been turned down by other companies' equipment." The image processing visual inspection system "iVision" will solve these problems! *For details, please download the catalog in PDF format. First, we will confirm with our customers "what" and "in what condition" they want to conduct inspections, and based on that, we will consider the appropriate cameras and lighting, and then propose the necessary inspection equipment.

• Image Processing Equipment

I want to measure the thickness of films and steel plates!! With a combination of two laser measuring devices and a camera, it is possible to simultaneously inspect the thickness of the workpiece as well as any scratches or dents. [Instruction manual available] In general inspection devices, the inspection is limited to either thickness or defects like scratches, but iVision can create a device that inspects both simultaneously. For those who require inspections of both aspects and are considering the introduction of separate inspection devices, iVision can accommodate this with a single inspection device. ADDI Co., Ltd. has extensive experience in the development of inspection devices, allowing us to handle a wide variety of components. With our expertise, we can deliver solutions tailored to our customers' needs. "Our products are difficult to inspect automatically" or "We have been turned down by other companies' devices." The image processing visual inspection system "iVision" solves these concerns! *For details, please download the catalog in PDF format. First, we confirm what the customer wants to inspect and in what condition, then we consider the appropriate cameras and lighting, and based on that, we propose the necessary inspection devices.

• Image Processing Equipment

Can't you confirm whether the product is correctly placed inside the packaged container? There is a possibility to inspect contents that cannot be verified through visual inspection【Explanation document available】. In the case of opaque containers, final inspection of the contents can be challenging, but by combining iVision with transmission imaging equipment, it may be possible to inspect the contents by revealing the state inside the product. Are you not worried about whether the contents are truly placed correctly after packaging? Depending on the packaging container and contents, it is possible to verify the contents even in an opaque exterior condition. "Our products are difficult to inspect automatically," "We have been turned down by other companies' equipment." The image processing appearance inspection system "iVision" can solve such concerns! *For details, please download the catalog in PDF format. At our company, we first confirm what the customer wants to inspect and in what condition, then consider the appropriate cameras and lighting, and based on that, we will propose the necessary inspection equipment.

• Image Processing Software

I don't know how to implement an appearance inspection system using AI!! For those considering the introduction of an AI inspection system, we will clearly explain the process leading up to implementation. [Flow of Implementation Available] Even if you believe that using AI will lead to success and is reliable, do you have concerns about the implementation method? For those individuals, we will gently explain the process of introducing an image processing inspection system using AI. ADDI Co., Ltd. has been involved in the development of inspection devices for many years and offers a wide range of solutions, including AI, thanks to our expertise, allowing us to deliver according to our customers' needs. "Our products are difficult to inspect automatically" or "We have been turned down by other companies' devices." The image processing appearance inspection system "iVision" will solve these problems! *For details, please download the catalog in PDF format. First, we will confirm with the customer "what" and "in what condition" they want to conduct inspections, consider appropriate cameras and lighting, and then propose the necessary inspection equipment accordingly.

• Image Processing Software

What are the characteristics of inspections using 3D sensors? We provide an easy-to-understand explanation of inspection systems using 3D sensors, and it is also possible to combine them with image processing [explanatory materials available]. What can 3D sensors do? How can they be implemented? We explain inspection systems that combine camera-based image inspection, accompanied by illustrations for clarity. ADDI Co., Ltd. has introduced numerous inspection devices using cameras and sensors thanks to our long-standing expertise in developing inspection equipment. With this know-how, we can provide delivery solutions tailored to our customers' needs. "Our products are difficult to inspect automatically" or "We have been turned down by other companies' devices." The image processing visual inspection system "iVision" solves these problems! *For details, please download the catalog in PDF format. First, we confirm with our customers "what" and "under what conditions" they want to conduct inspections, then consider the appropriate sensors, cameras, lighting, etc., and based on that, we propose the necessary inspection equipment.

• Image Processing Software

When using AI for visual inspection, it is essential to first gather images of both good and defective products. Would you consider exploring a rule-based approach to solve these issues? By following these steps, stable visual inspection with AI can be achieved. [Contents of Proposal 4] - Collect a large number of accurate images - Train the AI on accurate images - In that case, is AI really necessary? Thinking about the future, I want to use AI, but I'm worried if it can truly perform inspections. If you feel this way, please take a moment to read this.

• Image Processing Software

I thought that using AI would make visual inspections easy, and I also thought that the current AI setup is very simple. However, visual inspections using AI cannot make accurate judgments if basic things are overlooked. Let’s clearly explain what the issues are! 【Contents of Proposal 3】 - Teach AI correctly - Accurately capture defective images - Improve the imaging environment If you have introduced AI but cannot perform inspections correctly, and you are worried about whether inspections can really be done with AI, please read on.

• Image Processing Software

Regarding the inspection of scratches and dents that occur on the side of cylindrical components, would you consider switching from "visual inspection" to "automated inspection using a camera"? We would like to introduce a case study of an inspection device that performs inspections of the entire side by setting the workpiece on a rotating jig and rotating it. By using a rotating jig, it becomes possible to automate the visual inspection that a person would typically perform by manually rotating the workpiece. 【Features of this system】 ■ Realization of an inspection device that can check the entire side of cylindrical components by using a rotating jig ■ Capable of accommodating various cylindrical components ■ The device can be modified based on the inspection requirements *First, we will verify whether the workpieces you wish to inspect can be inspected. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

We want to advance the automation of visual inspection for electronic components! Although we have implemented it, we are unable to utilize it effectively! We will provide a detailed explanation of various issues and present a proposal. ADDI Co., Ltd. has extensive experience in the development of inspection equipment, allowing us to address a wide range of electronic components and related auxiliary materials. With our expertise, we can deliver solutions that meet our customers' needs. "Our products are difficult to inspect automatically" or "We have been turned down by other companies' equipment." The image processing visual inspection system "iVision" will solve these problems! [Contents of the Proposal for Image Processing Visual Inspection (Regarding Electronic Component Inspection)] ■ Issues related to increased production and succession planning for inspectors ■ Problems with inspection systems that fit our products and processes ■ Issues regarding the environment for installing inspection equipment We are currently offering a proposal that outlines the problems associated with the automation of inspections at various stages related to electronic components and hints for solutions! *For details, please download the catalog in PDF format. First, we will confirm what our customers want to inspect and in what condition, then we will consider the appropriate cameras and lighting, and based on that, we will propose the necessary inspection equipment.

• Image Processing Software

We want to advance the automation of appearance inspection for film and glass transparent materials! We have implemented it, but we are unable to utilize it effectively! We will provide a detailed explanation of various issues! A proposal will be presented. ADDI Co., Ltd. has been addressing numerous cases of transparent materials, which have traditionally been difficult for automatic inspection, thanks to our long-standing technology in inspection equipment development. With this know-how, we can deliver solutions that meet our customers' needs. "Our products are difficult to inspect automatically" and "We have been turned down by other companies' equipment." The image processing appearance inspection system "iVision" will solve these problems! [Contents of the Image Processing Appearance Inspection Proposal (Regarding Transparent Material Inspection)] ■ There are reasons why inspection is difficult. ■ The number of defects that can now be detected is increasing. We are currently offering a proposal that outlines why transparent materials are difficult to detect and how inspection can be made possible! *For details, please download the catalog in PDF format. First, we will confirm with the customer "what" and "in what condition" they want to conduct inspections, and then we will consider the appropriate cameras, lighting, etc., and based on that, we will propose the necessary inspection equipment.

• Image Processing Software

Would you like to switch the visual inspection of tablets and other pills spread out on a tray from "manual inspection" to "automated inspection using a camera"? We will introduce a practical example of the "iVision Robot," which installs a camera and lighting on a general-purpose XY stage movement device, enabling inspection over a specified area. By using a two-dimensional operating stage, it is possible to inspect the entire designated area for each specified section without having to set the camera position each time, allowing you to confirm where and what kind of defects were present. 【Features of this system】 - By using a two-dimensional operating stage, it is possible to sequentially inspect even large areas. - It indicates the coordinates of defects and displays a map showing where and what kind of defects were found. - The device can be modified based on the inspection requirements. *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information is included in the PDF, along with the processing flow.

• Image Processing Software

Regarding the inspection of the shape, size, and depth of dents that occur on steel plates, would you consider switching from "visual inspection" to "automated inspection using cameras and 3D sensors"? We would like to introduce a practical example of the "iVision Robot," which enables inspection by installing a camera and 3D sensor on a general-purpose XY stage moving device. By using both a camera and a 3D sensor, we can create an inspection device that combines the strengths of each, allowing for accurate confirmation of defective conditions. 【Features of this system】 ■ Realization of an inspection device that can confirm three-dimensional shapes using a camera and 3D sensor ■ Ability to comprehensively assess the condition of defective areas using both the camera and sensor ■ The device can be modified based on the inspection requirements *First, we will verify whether the work you wish to inspect can be accommodated. *Detailed processing information, including specifics and processing flow, is provided in the PDF.

• Image Processing Software

Shall we switch the visual inspection of resin trays produced by air pressure forming from "manual inspection" to "automated inspection using a camera"? By installing a camera and lighting on a general-purpose XY stage moving device, we will introduce a practical example of the "iVision Robot," which inspects each tray individually for products that form multiple trays from a single sheet. By using a two-dimensional operating stage, the camera can automatically move to the position of each tray on the sheet and perform inspections, allowing us to confirm where and what type of defects are present. 【Features of this system】 - Realization of an inspection device that performs repetitive actions using a general-purpose tabletop robot - Mapping of defective areas is also possible - The device can be modified based on the inspection content *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information, including specifics and processing flow, is provided in the PDF.

• Image Processing Software

Would you like to switch from "visual inspection" to "automated inspection using cameras" to exclude debris and foreign objects contained in products flowing on the conveyor and only inspect the products? By installing cameras and lighting on the existing conveyor and using AI for judgment, we can create a system that ignores foreign objects during transport and performs appearance inspections solely on the products. While it is possible to ignore specific foreign objects and conduct inspections with conventional inspection devices, this system utilizes AI to introduce diversity in judgment. 【Features of this system】 ■ Inspection can be performed on the conveyor without creating a separate inspection system ■ Realization of image processing inspection devices using AI ■ Addresses defects that were difficult to detect with conventional inspection systems ■ The device can be modified based on the inspection content *First, we will verify whether the work desired by the customer can be inspected. *Detailed processing information, including details and processing flow, is provided in the PDF.

• Image Processing Software

Regarding the inspection of patterned fabric materials being wound using roll-to-roll equipment, would you consider switching from "visual inspection" to "automated inspection using cameras"? This system will involve installing cameras and lighting along the roll-to-roll equipment line and using AI for judgment to conduct fabric inspections. By utilizing AI, it will be possible to distinguish between differences in fabric patterns and stains that are difficult to identify with conventional inspection equipment. 【Features of this system】 - Inspection can be performed on the line without creating a separate inspection system. - Realization of image processing inspection equipment using AI. - Addressing defects that were difficult to detect with traditional inspection systems. - The equipment can be modified based on the inspection content. *First, we will verify whether the work you wish to inspect can be inspected. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

Inspection of the internal condition of blister-packaged drugs and food "Why not switch from visual inspection to automated inspection using cameras?" We will introduce a practical example of the "iVision Robot," which is equipped with a camera and lighting on a general-purpose XY stage moving device, allowing for inspection of arranged blister-packaged products sequentially. By using a two-dimensional operating stage, the camera moves over the arranged products, capturing images of the interiors of the blister-packaged products in sequence and conducting inspections. 【Features of this system】 ■ Realization of an inspection device that performs repetitive actions using a general-purpose tabletop robot ■ Mapping of defective areas is also possible ■ The device can be modified based on the inspection requirements *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information, including the processing flow, is provided in the PDF.

• Image Processing Software

Regarding the inspection of the surface irregularities of metal steel plates flowing on the line, would you consider switching from "individual measurements" to "automated inspection using 3D sensors"? By installing 3D sensors on the existing conveyor line and conducting measurements, it becomes possible to inspect the irregularities without having to individually remove and measure each plate. For materials like metal plates, which are difficult to handle manually, conducting inspections on the existing conveyor line can reduce the effort and human errors associated with separate inspections. 【Features of this system】 - Inspection can be performed on the conveyor line without creating a separate inspection system. - By installing the device on the production line, the inspection process can be streamlined. - The use of 3D sensors enables the realization of inspection devices that can measure size and depth. - The device can be modified based on the inspection requirements. *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

Inspection is not just about measuring defects and dimensions of parts!! We explain various uses of inspection equipment! A beginner's guide is available. The iVision developed by ADI Co., Ltd. can be customized for various applications. We can assist not only with appearance inspection systems for parts but also with various other uses. "We can't do appearance inspection, but can we create a device using images?" We have turned various inquiries like this into reality. [Contents of the Beginner's Guide, Application Edition 2] ■ Uses other than appearance inspection ■ Specific examples other than appearance inspection ■ Benefits of automating these tasks We are currently offering a beginner's guide that clearly explains what other uses there are besides appearance inspection for customers considering or about to consider automating their inspection systems! *For details, please download the catalog in PDF format.

• Image Processing Software

What are the advantages of automating visual inspections compared to manual inspections? This includes an explanation of the use of inspection results! We will provide an introductory book. ADDI Co., Ltd. not only assists in building inspection systems but also in aggregating inspection results and creating software tailored to our customers' needs. We have transformed various consultations into reality, such as "I want to build a system that includes feedback on inspection results and other functionalities." [Contents of the Introductory Book, Application Edition 1] ■ How to utilize inspection results ■ Advantages of automating visual inspections ■ Another method of utilizing inspection results We are currently offering an introductory book that clearly explains the various uses of inspection results beyond inspection judgments for customers who are considering or will consider automating their inspection systems! *For details, please download the catalog in PDF format.

• Image Processing Software

Regarding the flatness inspection of steel plates, would you consider switching from "manual measurement" to "automated inspection using a laser displacement meter"? We will introduce a practical example of the "iVision Robot," which has made measurement possible by installing a laser displacement meter on a general-purpose XY stage moving device. By using a two-dimensional operating stage, it becomes possible to measure multiple points on a metal plate. Additionally, by utilizing a general-purpose tabletop robot and a laser displacement meter, it is feasible to create an inspection system at a relatively low cost. 【Features of this system】 ■ Realization of a parallelism inspection device that is difficult to achieve visually by using a laser displacement meter ■ Realization of an inspection device using a general-purpose tabletop robot and a laser displacement meter ■ Creation of overall trend mapping, etc., depending on the measurement points ■ The device can be modified based on the inspection content *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

In the inspection of metal parts with many similar features flowing on the conveyor, would you consider switching from "visual inspection" to "automated inspection using cameras"? By installing cameras and lighting on the existing conveyor and using AI for judgment, we can create a system that performs variety identification inspections during transport. While it is possible to distinguish specific varieties with conventional inspection equipment, this system utilizes AI to introduce diversity in judgment. 【Features of this system】 ■ Inspection can be conducted on the conveyor without creating a separate inspection system. ■ Realization of image processing inspection equipment using AI. ■ Since inspections are conducted on the line, it is possible to reduce inspection processes and personnel. ■ The equipment can be modified depending on the inspection content. *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

Regarding the inspection of defects such as scratches on the surface of metal parts being transported on a conveyor, would you consider switching from "visual inspection" to "automated inspection using a 3D sensor"? By installing a 3D sensor on the existing conveyor and scanning the surface of the parts, it will eliminate the need to individually remove parts for visual confirmation, allowing for automatic inspection. 【Features of this system】 ■ Inspection can be conducted on the production line without creating a separate inspection system. ■ By installing the device on the production line, it is possible to reduce the inspection process. ■ The use of a 3D sensor enables the realization of an inspection device that can measure the size and depth of defects. ■ The device can be modified based on the inspection requirements. *First, we will verify whether the workpieces you wish to inspect can be inspected. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

Shall we switch the inspection of the soldering condition on the substrate from "visual inspection" to "automated inspection using a camera"? We will introduce a practical example of the "iVision Robot," which operates as an inspection system by attaching an inspection system to a general-purpose XY stage moving device. By using a two-dimensional operating stage, it becomes possible to check the condition of solder balls at various locations on the substrate. 【Features of this system】 - Capable of inspecting the absence and positional defects of solder balls across the entire substrate - Mapping of defective areas is also possible - The device can be modified based on the inspection content *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information, including details and processing flow, is provided in the PDF.

• Image Processing Software

In the inspection of the parallelism of each surface of two stacked steel plates, would you consider switching from "manual measurement inspection" to "automated inspection using a 3D sensor"? We will introduce an inspection device that uses a scalar robot on a fixed frame to measure both surfaces of the two steel plates simultaneously. With the 3D sensor in operation, it becomes possible to measure the parallelism of the entire two steel plates by scanning each surface. 【Features of this system】 ■ Realization of a parallelism inspection device that is difficult to achieve visually by using a 3D sensor ■ Numerical representation of the parallelism for multiple components ■ The device can be modified based on the inspection requirements *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are included in the PDF.

• Image Processing Software

We want to advance the automation of visual inspections, but there are many considerations to take into account, and we will explain the questions such as where to start! We will provide an introductory book. ADDI Co., Ltd. is assisting customers in building inspection systems automated in the style they desire. "We are in trouble, but we don't really understand the methods for advancing inspection automation." We have turned various consultations into tangible solutions. [Contents of the Introductory Book Basic Edition 2] ■ What kind of device is an automatic inspection machine? ■ What are the advantages and disadvantages of each style? ■ Which method is suitable for implementation in our company? We are currently offering an introductory book that clearly explains the pros and cons of installation methods for automatic inspections for customers who are considering or will consider the automation of inspection systems! *For details, please download the catalog in PDF format.

• Image Processing Software

What does it mean to automate image processing visual inspection? We will explain the basic knowledge and mechanisms that you might be hesitant to ask about! We are offering an introductory book. ADDI Co., Ltd. assists in the automation of inspection systems, from verifying whether inspections can be automated to constructing systems suitable for inspection, including "cameras," "lighting," and "inspection processing." We have turned various consultations, such as "I am struggling, but I don't really understand what inspection automation means," into tangible solutions. [Contents of the Introductory Book - Basic Edition] ■ What is the mechanism of image processing visual inspection? ■ Is the current inspection not sufficient? ■ Is implementation difficult? We are currently offering an introductory book that clearly explains the mechanisms and benefits of automated inspection for customers considering or about to consider the automation of inspection systems! *For details, please download the catalog in PDF format.

• Image Processing Software

Regarding the inspection of the size, height, shape, and position of the unevenness on the steel plate, would you consider switching from "manual measurement" to "automated inspection using a 3D sensor"? We will introduce a practical example of the "iVision Robot," which enables measurement by installing a 3D sensor on a general-purpose XY stage moving device. By using a two-dimensional operating stage, it becomes possible to confirm where and how large workpieces were positioned. 【Features of this system】 - Realization of an inspection device that can confirm three-dimensional shapes using a 3D sensor - Mapping of placement locations is also possible - The device can be modified based on the inspection requirements *First, we will verify whether the workpieces you wish to inspect can be measured. *Detailed processing information and flow are included in the PDF.

• Image Processing Software

Regarding the inspection of defective classification of nuts and legumes being transported on the line, would you consider switching from "visual inspection" to "automated inspection using cameras"? By installing cameras and lighting on the existing transport line and using AI in the analysis software, we will create a system to inspect whether any defects are present in the nuts and legumes during transport. With AI, it will also be possible to distinguish defects such as breaks, cracks, and out-of-spec sizes in nuts like almonds and walnuts, which are difficult to classify based on rules due to their varying shapes and sizes. 【Features of this system】 ■ Inspection can be conducted on the transport line without creating a separate inspection system. ■ Realization of image processing inspection equipment using AI. ■ Addressing defects that were difficult to detect with conventional inspection systems. ■ The equipment can be modified based on the inspection requirements. *First, we will verify whether the work desired by the customer can be inspected. *Detailed processing information and flow are included in the PDF.

• Image Processing Software

Regarding the inspection of printed materials with issues such as text smudging or white gaps on sheet-printed items, would you consider switching from "visual inspection" to "automated inspection using a camera"? We would like to introduce a practical example of the "iVision Robot," which enables inspection of each piece of printed material by installing a camera and lighting on a general-purpose XY stage moving device. By using a two-dimensional operating stage, it becomes possible to inspect the work arranged in sheets sequentially without having to set the camera position each time, allowing for confirmation of the location and type of defects present. 【Features of this system】 - Realization of an inspection device that performs repetitive operations using a general-purpose tabletop robot - Mapping of defective areas is also possible - The device can be modified according to the inspection requirements *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information, including specifics and processing flow, is provided in the PDF.

• Image Processing Software

"Are you facing any concerns?" - You want to connect inspection results to process improvements, but you're not sure how. - The results from inspectors vary, making it difficult to gather accurate statistics. - You have been asked to provide documentation from the production side for process improvements. Are you experiencing any issues as you implement automation in visual inspections? "I am struggling, but I don't fully understand the other benefits of inspection automation." This is good news for those who are still in the consideration phase. We will briefly explain how to effectively utilize the results of automated inspections. First, please download the introductory book and consider it.

• Image Processing Software

In the inspection of surface scratches, dents, and unevenness on large box-shaped products such as cabinets, why not switch from "visual inspection" to "automated inspection using a 3D sensor"? This system measures and inspects each inspection target area sequentially by attaching a 3D sensor to a multi-axis robot, covering a wide area. By using a robot, it is possible to direct the 3D sensor to various locations of different shapes, enabling the handling of components with complex shapes that are difficult to inspect with conventional automated methods. 【Features of this system】 - Realization of an inspection device that can confirm three-dimensional shapes using a 3D sensor - Capability to inspect complex locations by using a multi-axis robot - Mapping of defective areas is also possible - The device can be modified according to the inspection requirements *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software

Regarding the side inspection of cylindrical products arranged on a dedicated tray equipped with a rotating mechanism: "Shall we switch from visual inspection to automated inspection using a camera?" We will introduce a practical example of the "iVision Robot" that combines a general-purpose XY stage movement device with a special tray. In the side inspection of cylindrical components, it is common to inspect each item one by one while rotating the inspection target, which can be very costly to create a dedicated inspection device. Therefore, by creating a simple rotating device equipped with a dedicated tray and using it in conjunction with a movable camera, it is possible to create a relatively inexpensive device. 【Features of this system】 ■ Enables side inspection of cylindrical products using a dedicated tray and a two-dimensional movable stage ■ Allows for the introduction of an inspection device at a relatively low cost without creating an independent inspection device ■ Displays a map indicating the location and type of defects on the tray ■ The device can be modified based on the inspection content *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information, including details and processing flow, is provided in the PDF.

• Image Processing Software

The shape and conditions of the product are complex, so inspection cannot be done without using AI. We borrowed a demo machine that can inspect with AI, but it does not make correct judgments. It seems that anything can be done with AI, but there are pitfalls. I will briefly explain the suitability of using AI, the reasons why things may not go well, and more. [Contents of Proposal 2] - The misconception that it is difficult without AI - What AI inspections are good at - Reasons why inspections may not go well - Solutions to problems during implementation If you are currently considering automating inspection systems with AI, please take a moment to read this.

• Image Processing Software

Regarding the size classification and defect inspection of root vegetables flowing on a dedicated conveyor line, would you consider switching from "visual inspection" to "automated inspection using cameras"? By installing cameras and lighting on the existing conveyor and classification equipment and using AI for judgment, we can create a system that classifies root vegetables by size and identifies defects during transport. Using AI makes it possible to distinguish items with irregular shapes and colors, such as vegetables, which are difficult to identify with standard inspection equipment. 【Features of this system】 - Inspection can be conducted using the existing conveyor and classification equipment without creating a separate inspection system. - Utilization of the existing conveyor line allows for effective use of equipment. - AI enables inspection of irregularly shaped vegetables. - The equipment can be modified based on the inspection requirements. *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information, including details and processing flow, is provided in the PDF.

• Image Processing Software

Would you like to switch from "visual inspection" to "automated inspection using a camera" for the appearance inspection of fine defects on metal and glass surfaces? We would like to introduce a practical example of the "iVision Robot," which installs a camera on a general-purpose XY stage moving device to sequentially move to specified locations and conduct inspections. By using a two-dimensional operating stage, it becomes possible to sequentially inspect specified locations and confirm where and what kind of defects were present. When conducting repeated inspections using a magnifying glass, there may be areas that are not inspected, leading to oversight. However, since this system operates automatically, it can avoid that issue. 【Features of this system】 ■ By using a two-dimensional operating stage, it is possible to inspect wide areas sequentially. ■ By moving automatically, it can thoroughly inspect the target area even for detailed inspections. ■ It indicates the coordinates of defects and displays a map showing where and what kind of defects were found. ■ The device can be modified based on the inspection content. First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are provided in the PDF.

• Image Processing Software