Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.
1711～1740 item / All 2778 items
For hoop plating and plating processing, leave it to Todenka!
At Tokyo Electric Power Company, we have a "Masking Tape Machine" as production equipment. 【Specifications】 ■ Material thickness: 0.03 to 2.5mm ■ Material width: up to 200mm ■ Masking intersection: ±0.2mm ■ Minimum tape width: 0.8mm *For more details, please refer to the catalog or feel free to contact us.
We will cut the IC chips smaller, thinner, and process them with greater precision.
Suntech Co., Ltd. provides cutting (dicing) and grinding (thinning) processing technologies primarily for semiconductor silicon wafers. Additionally, these processing technologies are applied to various materials that are considered difficult to process, such as blue glass, ceramics, and solder sheets. We utilize technologies such as back grinding (grinding and polishing), dicing, chip tray technology, and visual inspection technology. Furthermore, Suntech's prototype technology support division offers clean rooms and processing equipment. For more details, please contact us or refer to our catalog.
Productivity boost! Consumables reduced by half! A device that enables dimensional discharge machining.
The "Super Cleaner SPC/W-20" is a purification system for discharge machining fluids that can be retrofitted to the wire cut machining machine, increasing the 1st cut processing speed by over 20% and reducing wire consumption by up to 90%. In addition, we offer products such as the "Super Cleaner SPC/W-10" for fine hole discharge machining and the "Super Cleaner SPC/O-10" for die sinking discharge machining. It significantly enhances productivity and efficiency in discharge machining, where there is a strong demand for reducing costs related to filters, wires, and other consumables. 【Features】 ■ Increased processing speed ■ Reduced electrode consumables ■ Reduced consumables ■ Increased rust prevention effect *For more details, please refer to the catalog or feel free to contact us.
Laser processing with suppressed heat influence! It excels in precision, reliability, and operability.
The "MCS Series" is a high-precision water laser processing machine. It can process holes (0.76mmφ) in superalloy (8mm thick) in 70 seconds. With high machine accuracy (error +/-1.5km), the cutting width is a minimum of 30μm. Additionally, due to water jet cooling, there is virtually no thermal impact, and it enables perfectly parallel cutting edges and hole processing with a cylindrical beam. 【Features】 ■ High speed and accuracy ■ Cooling and removal ■ User-friendly *For more details, please refer to the PDF materials or feel free to contact us.
![[Thesis] Water Laser Processing Machine MCS Device](https://image.mono.ipros.com/public/product/image/f39/2000213248/IPROS327196794229118533.jpg?w=280&h=280)
New Developments in Laser Microjet Technology
The water jet-guided laser technology (trademarked as Laser Microjet: LMJ) is known as a patented method that enables the stable guidance of high-power lasers to materials using a fine layer water jet with a diameter of 100μm, realized through a disk-shaped liquid supply space. 【Contents】 ○ Introduction ○ LMJ Processing Principles and Features ○ MCS Processing Machine ○ Processing Examples ○ Conclusion For more details, please contact us or download the catalog.
There is processing experience with φ0.35mm and above. It can also be applied to endoscope lenses and other electronic devices.
If you have any issues with small-diameter machining, please feel free to contact us. We also accept prototypes.
Parts manufacturing with specialized dedicated machines! We manufacture various dedicated machines, such as cutting machines for gasoline and diesel spray nozzles! *We are currently offering a collection of achievements and case studies!
At Kato Ken Tekko, we manufacture specialized machines and processing equipment for parts production, including gasoline and diesel spray nozzle cutting machines, primarily for the automotive industry. Additionally, we can custom-make specialized machines for mass production parts! We achieve high functionality, high quality, and low cost! We develop specialized machines that contribute to improving production efficiency, reducing labor hours, and automating processes, tailored to each site, production line, and production plan! ◆ We offer a free document on the achievements of part-specific production equipment for automotive parts manufacturing! ◆ A collection of case studies will also be provided! 【Are you facing any of these issues?】 ■ We want to introduce high-efficiency manufacturing equipment that can handle mass production... ■ We would like you to develop specialized machines that can meet annual cost reduction demands... ■ Due to significant losses between processes, we need equipment that can enable consistent production... *Please view the PDF from the download for various materials.
60% market share in piston ring processing machines! Advancing to the world through accumulated technological development!
Our company handles a range of products including "piston ring processing machines" such as lathe-type, milling-type, and grinding-type, as well as "overhauls and modifications" for repairs of malfunctioning parts, "cleaning equipment," "camshaft processing machines," and "crankshaft processing machines." We have an in-house integrated system that covers all processes from sales to design, processing, and assembly. We have delivered to 24 countries, with 85% of our sales coming from overseas and 15% from domestic markets. 【Main Clients】 ■ North America, South America, Central America, Europe, Oceania ■ Asia ■ Japan *For more details, please refer to the PDF materials or feel free to contact us.
自動車内装用の合成皮革への穴空け加工機として、世界トップクラスシェア！
WISTA(独)社製のパーフォレーターは自動車用の本皮シート、合皮シートへ連続的に穴明けを行う加工機です。紙幣、切手の穴あけ用のマシン等様々な種類を取りそろえております。 特に自動車内装用の合成皮革へのパーフォレータの加工機メーカーとしては世界トップクラスのシェアが御座います。また、加工請負も行っております。 詳しくはお問い合わせください。
![[Factory Equipment] Ultra-Precision Fiber Laser Processing Machine 'SPF3907A'](https://image.mono.ipros.com/public/product/image/1d2/2000775321/IPROS78590077873523132230.png?w=280&h=280)
Supports prototyping for new businesses! Non-ferrous metals such as copper, brass, and aluminum can be processed.
We would like to introduce the ultra-precision fiber laser processing machine 'SPF3907A' owned by Nakayama Seimitsu Co., Ltd. For thin plates with a thickness of 1mm or less, fine slit processing that was previously reproduced using fine wires with wire discharge machines can now be achieved in a short time using the fiber laser processing of this machine. Additionally, it is controlled by linear servo motors, allowing for high-speed and high-precision processing. 【Features】 ■ Capable of processing non-ferrous metals such as copper, brass, and aluminum ■ Supports prototype processing for new business ventures ■ Controlled by linear servo motors ■ Capable of extracting data from photographs and processing it with a fiber laser ■ Fine details in photographs can be reproduced with high-speed and high-precision processing of the fiber laser *For more details, please refer to the PDF document or feel free to contact us.
![[Processing Results] MRF Ultra-Precision Freeform Toroidal Mirror](https://image.mono.ipros.com/public/product/image/e4c/2000502880/IPROS18934968030383368569.jpeg?w=280&h=280)
Combining diamond turning processing with MRF! It has become possible to achieve higher precision processing than before.
We would like to introduce our processing achievements of the MRF ultra-precision freeform "toroidal mirror." By combining diamond turning processing with MRF, it has become possible to manufacture freeform optical components with higher precision than before. MRF refers to a method where a magnetic viscoelastic fluid containing abrasives is flowed over a rotating wheel (magnet), and the abrasives that appear on the outer peripheral part of the fluid flowing over the wheel are used for polishing. 【Overview】 ■ Data Correction <UA3P Measurement Data Conversion> - Input data can be discrete measurement data or formulas from UA3P, and it can be interpolated or converted to a processable state. ■ Interference Check Simulation ■ Toroidal Mirror Processing <Actual Machine Operation> - To prevent the workpiece from interfering with and damaging the tool or the main body of the equipment, a simulation check is performed before processing to ensure there is no interference with the equipment. *For more details, please refer to the PDF document or feel free to contact us.
Pursuing simple operability and reasonable pricing while maintaining basic performance!
The "E920" is a lens edger (grinding machine) that pursues simple operability and reasonable pricing while maintaining basic performance. It is a professional machine for an eco-friendly era. With a configuration of three grinding wheels for "coarse plastic," "coarse glass," and "Yagen/flat finishing," along with a comprehensive processing support program, it is compatible with all lens materials, including the latest high-refractive aspheric and water-repellent coated lenses, representing an ideal hardware and software configuration. It features a color LCD and touch panel for an easy-to-use and easy-to-read display. Utilizing a common 3D lens sensor from the E series, it can process lens sizes up to 16mm (H) for flat grinding and 18mm (H) for Yagen (when using optional equipment). For more details, please contact us or refer to the catalog.
We will cut the materials entrusted to us by the customer into shapes suitable for various tests.
In "Test Material Cutting," we cut the materials entrusted to us by our customers into shapes suitable for various tests. Using wire electrical discharge machines, band saws, and more, we cut a wide range of materials from general steel to super heat-resistant alloys, titanium, and aluminum. The wire electrical discharge machine (super large wire electrical discharge machine) processes with wires of φ0.1 to φ0.3 mm, which reduces cutting costs and allows us to make the most of the valuable materials entrusted to us by our customers. The grinding wheel cutting machine can cut a large number of materials in a short time. 【Processing Machines】 ○ Wire Electrical Discharge Machine ○ Super Large Wire Electrical Discharge Machine ○ Band Saw ○ Grinding Wheel Cutting Machine For more details, please contact us or download the catalog.
FPC roll substrate compatible UV laser driller
The "UV Laser Driller" is equipped with a new scanner that reduces processing time. Additionally, the power has been increased from 20W to 30W, enhancing the processing speed. <Product Features> - Reduced processing time compared to conventional products - High positional accuracy (±15μ) - Adoption of high-power laser (30W) *For more details, please download the PDF or contact us.
When it comes to stainless steel, you can leave it all to us. We are confident in our processing quality.
Stainless Machinery Co., Ltd. was founded in 1996 (Heisei 8) in Kokura Minami Ward, and after several years, we relocated to our current location in 2012 (Heisei 24). We have always pursued earning the trust of our customer companies in the high quality of various metal processing orders. We do not have dedicated sales representatives. Our belief is that our sales strength lies solely in the quality of our processing technology, and all employees have worked together steadily and steadily towards consistent development. While being aware of our capabilities, we have prioritized human resource development and skill enhancement within the company to achieve the highest quality possible. With our relocation to the current site, we have secured sufficient workspace, enabling further improvements in operational efficiency and a system that can flexibly respond to our customers' product schedules. Moving forward, as a shared philosophy among all employees, we will continue to pursue not only high quality but also, above all, the goal of not receiving complaints from our customers. For more details, please contact us or refer to our catalog.
![[Example] Ultra-high precision micro-machining <Micron-level cutting processing on metal cross-sections>](https://image.mono.ipros.com/public/product/image/d0d/2000918051/IPROS05351711356039695616.png?w=280&h=280)
By entrusting us with our integrated production system, we will significantly reduce your indirect costs.
We would like to introduce a case study of "ultra-high precision micro-machining" conducted by Nakamura Machinery Co., Ltd. In this case, we achieved high precision and high efficiency in machining. In our constant temperature room, we maintain a stable room temperature of less than ±0.5°C through sensors that measure temperature and humidity, along with system-controlled air conditioning, ensuring stable machining accuracy. 【Case Study】 ■ Micron-level cutting processing on metal cross-sections ■ Achieved high precision and high efficiency in machining ■ Machining performed with an ultra-high precision high-speed micro-machining machine (text processing using a ball end mill with R0.005) *For more details, please refer to the PDF document or feel free to contact us.
It is also possible to introduce image inspection on the press processing line to detect defective products!
Our company performs "punching" using continuous roll material punching presses, C-type presses, crank presses, and more. With the "continuous roll material punching press," it is possible to process products while laminating roll-shaped materials through press processing. Additionally, with the "image positioning press," the position of the table is automatically corrected for each press operation, allowing for repeated pressing at the same position. 【Punching】 ■ Continuous roll material punching press ■ C-type press, crank press ■ Automatic press line ■ Image positioning press ■ Roll press *For more details, please download the PDF or feel free to contact us.
Presenting examples of processing! Widely applicable in the production of solar cells, automotive parts, medical devices, and more!
3D-Micromac, a world-class manufacturer of laser microfabrication equipment based in Germany. Microfabrication devices using picosecond and femtosecond lasers are widely applied in the production of thin-film solar cells, organic EL for lighting, automotive parts, precision machine components, cutting and drilling of transparent materials with internal marking, and medical instruments. We have introduced the "picosecond laser microfabrication equipment" from 3D-Micromac, and we will respond to your prototype requests with this cutting-edge laser microfabrication equipment. Please feel free to consult with us. 【Application Examples】 ■ Thin-film solar cells ■ Organic EL for lighting ■ Automotive parts ■ Precision machine components ■ Cutting and drilling of transparent materials with internal marking ■ Medical instruments, etc. *You can view processing examples for free from the "Download" section below.
Free gift: 'Introduction to Laser Micromachining & Case Studies on Problem Solving Vol. 1'!
Hikari Co., Ltd. is a joint venture with Germany's 3D-Micromac, a world-class manufacturer of laser micro-processing equipment, and acts as the general agent in Japan. We have introduced their picosecond laser micro-processing equipment, which enables high-quality processing, including drilling, cutting, and marking, regardless of the material being processed, using this cutting-edge laser micro-processing technology. We are currently offering a free booklet titled "Laser Micro-Processing Machine Introduction & Case Studies Vol. 1" produced by Hikari Co., Ltd.! 【Here’s a brief introduction to the contents of the case studies!】 ◆ Laser Drilling Machine: Case study from a major electrical equipment manufacturer ⇒ Achieved an 8% increase in gross profit through improvements in the production process (including other equipment)! ◆ Roll-to-Roll Trimming Processing: Case study from a major packaging manufacturer ⇒ Achieved a 90% reduction in production costs through improvements in the production process, including the introduction of laser processes! ◆ We have a track record of equipment introduction and processing in various industries, including medical and life sciences, precision machinery, and automotive fields. * The "Laser Micro-Processing Machine Introduction & Case Studies Vol. 1" can be downloaded from the link below.
"Are you interested in electric discharge machines but think they are too expensive?" Here are the products scheduled for display!
Our company will be exhibiting at "JIMTOF2022" held at Tokyo Big Sight. We plan to showcase the "NC Fine Hole Electric Discharge Machine," as well as the "Threaded Fine Hole Electric Discharge Machine," "Electric Discharge Unit for Removing Broken Tools," and "Laser Marker." Finding a balance between high performance and cost-effectiveness is an eternal theme. If you are looking for a high-performance electric discharge machine at a low price, please take this opportunity to visit us. 【Event Overview】 ■ Dates: November 8 (Tuesday) to November 13 (Sunday), 2022 ■ Location: Tokyo Big Sight, East Hall 3 ■ Booth Number: E3007 ■ Exhibits: NC Fine Hole Electric Discharge Machine, Threaded Fine Hole Electric Discharge Machine, Electric Discharge Unit for Removing Broken Tools, Laser Marker *For more details, please refer to the PDF document or feel free to contact us.
We will meet various paper processing needs!
Our company manufactures various machines related to paper, including machines for labeling paper tubes, cutting paper tubes, grooving the ends of paper tubes, shaping paper tubes, automatically inserting menko into paper tubes, inserting PP caps into paper tubes, automatic production machines for paper fans, and machines for producing wallpaper sample catalogs.
Processing with minimal thermal impact has been achieved for materials that were previously difficult to process!
The "Ultraviolet (UV) Laser Processing Machine" is a device capable of processing electronic components and organic materials with minimal thermal impact. Since UV lasers have high energy photons, they can directly separate molecular bonds when irradiating organic substances. 【Features】 ■ Capable of processing with minimal thermal impact ■ Can directly separate molecular bonds when irradiating organic substances *For more details, please refer to the PDF document or feel free to contact us.
Precision machining with minimal heat impact is possible! It has a high laser absorption rate for each material, resulting in excellent machinability.
The "PLU Series" is a UV laser processing machine capable of precision machining with minimal thermal impact. It features a small spot diameter for precise processing and has a high laser absorption rate for various materials, resulting in excellent machinability. We offer a wide range of output options from 3W to 20W, allowing for burr-free marking suitable for items like bearings. 【Features】 ■ High laser absorption rate for various materials, resulting in excellent machinability ■ Small spot diameter for precise processing ■ Burr-free marking possible (suitable for items like bearings) ■ Minimal thermal impact on materials ■ Wide range of output options (3W to 20W) *For more details, please refer to the PDF document or feel free to contact us.
High-power fiber laser processing machine, deep engraving, printing, inline compatible, supports multiple languages worldwide, maintenance-free operation.
Output: 20W to 500W MOPA method Inline compatible, Compatible with various laser replacements Seismic isolation structure, air-cooled, maintenance-free Supports various data formats including DXF, AI, GIF, etc. QR code, Data Matrix, Code39, and others We accept consultations for specifying installation hole positions and additional features. 1. Due to short pulses (1 ns or more), there is minimal thermal impact on the material surface. 2. The repetition frequency can be widely adjusted from 1 to 4000 kHz. 3. Easy maintenance with excellent long-term stability.
A 2D laser processing machine capable of processing stainless steel with a "brilliant cut"!
Ueno Iron Works is a professional group specializing in laser processing and metalworking. By utilizing cutting-edge processing machines and technologies such as 3D laser processing machines and 6kW laser processing machines, we have achieved the delivery of high-quality products at low cost and in short lead times. This time, we would like to introduce the 2D laser processing machine "NX Series," which is capable of producing brilliant cuts with gloss and shine. 【2D Laser Processing Machine "NX Series"】 This 2D laser processing machine is designed with a focus on fast working speed, stability for continuous use, and user-friendly operation. It meets all necessary conditions. Notably, it is capable of producing brilliant cuts with gloss and shine. By achieving vividness and fine detail not seen in previous cutting surfaces, the range of processing applications expands dramatically. Additionally, it can process stainless steel up to 25mm thick, taking advantage of its high output. Table Size 3048×1524 Processing Range SUS: 25mm (Clean Cut) SS: 25mm AL: 15mm *For more details, please download the PDF or feel free to contact us. (A list of equipment is available.)
![[Data] Processing Achievement Examples](https://image.mono.ipros.com/public/product/image/427/2000487628/IPROS05919108442912879278.png?w=280&h=280)
Introducing our processing achievements using photographs! Delivering high-quality products at low cost and with short lead times.
This document is a collection of case studies summarizing the processing achievements of Ueno Iron Works Co., Ltd. It introduces examples such as "Brilliant Cut," which adds high precision and high quality to clean cuts, and cases that address requests regarding whether patterns can be cut into stainless steel spheres, accompanied by actual photographs. If you have any concerns regarding processing, please feel free to consult us. [Published Cases] ■ Processing Achievement 1: Processing of Stainless Steel Material 'Brilliant Cut' ■ Processing Achievement 2: Three-Dimensional Processing and Art Processing 'Challenging Stainless Steel Spheres' ■ Processing Achievement 3: Integrated Production of 'Laser Processing, Machine Processing, Welding, and Finishing' *For more details, please refer to the PDF document or feel free to contact us.
One step further in processing technology! High quality achieved through integrated production from processing to welding and finishing.
Ueno Tekko reads the drawings and understands what the customer desires in terms of the "product." When it comes to cutting, we not only cut but also deliver products that meet the customer's specific needs and purposes. Utilizing advanced processing machines and technologies such as 3D laser processing machines and 6kW laser processing machines, we have achieved the delivery of high-quality products at low cost and short lead times. From thin to thick materials, if you have any concerns regarding processing, please feel free to consult with us. 【Business Content】 ■ 2D laser processing of iron, stainless steel, aluminum, brass, titanium, etc. ■ 3D laser processing of structural steel, pipes, etc. ■ General machining, precision sheet metal work, and welding *For more details, please refer to the PDF materials or feel free to contact us.
Column traverse type! Introducing a processing machine capable of machining a wide range of pipe sizes!
The "NC Facing Type Pipe End Processing Machine" is a machine that processes the welding bevel shape of pipe ends. It consists of an NC facing head mounted on a column that operates in two dimensions, along with a pipe positioning and clamping section. The bevel shapes of the welding groove and the inner and outer diameters can be flexibly processed using a single-point tool. Additionally, the NC facing stroke is large at ±100mm, allowing for processing of a wide range of pipe sizes from 90A (Φ101.6mm) to 500A (Φ508.9mm). 【Overview Specifications】 ■ NC Facing Stroke: ±100mm ■ Movement Distance - Front and Back X-axis: 425, Up and Down Y-axis: 360, Left and Right C-axis: ±50mm ■ Spindle Head/Drive Motor: 15kw ■ Rotational Speed: Max, 300rpm *For more details, please refer to the PDF document or feel free to contact us.
Automatically transport work into the cabin! We will identify varieties based on cross-sectional shapes using image recognition.
The "Upper and Lower Guide Rail Automatic Processing Line" is a dedicated processing machine for drilling and cutting holes in guide rails for elevators. The workpieces supplied on the entrance magazine are automatically transported into the machine. After performing bolt holes, counterbore holes, and back machining, the workpieces are cut to the specified length and discharged into the exit magazine. By reading the QR code attached to the workpiece, information is obtained, and the corresponding processing program is automatically identified to start the processing. 【Features】 ■ In the entrance magazine, product types are identified based on the cross-sectional shape of the workpiece using image recognition (camera). ■ By reading the QR code, the corresponding processing program is automatically identified, and processing begins. ■ In the exit magazine, products and scrap are sorted after cutting. ■ Products are transported to the exit magazine, while scrap is directed to the scrap chute. *For more details, please refer to the PDF document or feel free to contact us.
![Hollow Fencing Processing Machine [Ideal for Processing Long Workpieces]](https://image.mono.ipros.com/public/product/image/75c/2000742118/IPROS61231486080577550017.png?w=280&h=280)
Achieving stable processing! Introduction of machining equipment for the inner diameter, outer diameter, and end face of motor pump bodies.
The "Motor Frame Processing Opposing Hollow Facing Machine" processes the inner diameter, outer diameter, and end face of the body (pipe) of a motor pump. To enable processing on both the left and right sides of the workpiece, the processing unit is designed in an opposing configuration. Due to the characteristics based on the workpiece, it is designed as a hollow type to allow the mandrel to pass through for clamping with a collet. Each left and right unit is equipped with an ATC (Automatic Tool Change) to accommodate a variety of workpieces. 【Features】 ■ The processing unit is designed in an opposing configuration to enable processing on both the left and right sides of the workpiece. ■ Designed as a hollow type to allow the mandrel to pass through, achieving stable processing. ■ Each left and right unit is equipped with an ATC (Automatic Tool Change). *For more details, please refer to the PDF document or feel free to contact us.
