Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
3751～3780 item / All 3985 items
ED2048997 RCJ7SB
[No delivery to private residences] Sekisui Techno Molding RCJ7SB direct delivery, cash on delivery not accepted, cannot be bundled with other manufacturers, recycling cart out bar 0.7 main body green.
Significantly contributes to maintaining the cleanliness of EDM machining fluid, which is directly linked to product finish and machine lifespan. Effectively captures a wide range of airborne particles from 0.07 to 260μ.
- Extension of EDM existing filter lifespan - Reliable capture of extensive microparticles in the machining fluid - Maintenance of machining fluid cleanliness - Extension of machine lifespan - Improvement of reliability - Enhancement of product finishing accuracy The ability to cut even ultra-hard alloys, which is an advantage of electrical discharge machining, means that ultra-hard microparticles are constantly circulating in the machining fluid. If these ultra-hard microparticles cannot be sufficiently removed by the filter system, it may trigger a "chain reaction of wear." When discharging the machining fluid, these microparticles are filtered as sludge, but the finer the mesh, the more expensive the filter becomes. Coarse filters are relatively inexpensive, but if they cannot adequately filter the sludge, they can cause failures in the main unit and affect the finishing accuracy of the products. Finer meshes tend to clog with sludge more easily, leading to increased frequency of replacement/cleaning, which in turn increases downtime (the time the machine is stopped for maintenance) and decreases work efficiency. Additionally, this results in economic losses and a higher environmental burden due to waste disposal. All these concerns can be resolved at once. Please try the special magnetic filter "Magnum."
Non-asbestos joint sheet
Sheet-like gasket material made by rolling and vulcanizing NBR binder with aramid fibers. It excels in sealing properties, adaptability, and high-temperature and high-pressure resistance. Dimensions: 1270 x 1270, 1524 x 1524 Thickness: 0.5, 0.8, 1.0, 1.5, 2.0, 3.0 Color: Blue Maximum temperature: 350°C Operating temperature: 200°C Others: 1) Graphite sheet (purity 99.5%) 1.5m x 1.5m 2) Non-asbestos gasket sheet for automotive use 0.5m x 1.0m
Free samples for the first 10 applicants! Reusable high-temperature resistant double-sided adhesive sheets. Widely used for temporary fixing of small parts and for foreign object adhesion.
"MagiCarrier-β" is a double-sided adhesive sheet with high heat resistance. By placing products on the sheet, it suppresses product shifting. It can be easily cut with scissors or a cutter, and even the adhesive resin surface, which may lose its stickiness due to dirt or foreign substances, can be restored through cleaning. There are numerous achievements in applications such as the transport of flexible printed circuits (FPC) and thin rigid boards during reflow processes, as well as temporary fixation of small components. ◎ Free samples for the first 10 applicants! Please feel free to contact us if you are interested. 【Features】 ○ High heat resistance: The adhesive resin is okay up to about 260°C (verified by in-house reflow furnace tests) ○ Shift suppression: Fixing products reduces risks during transport ○ Customizable: Delivery in a processed state for transport jigs is also possible ○ Choice of adhesive strength: Available in four types: weak, medium, strong, and super strong *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Reinforcement plate adhesive (semi-cured) sheet BS
■The processing method is simple. Adhesion is possible with roll lamination and after curing. ■Excellent moisture resistance. ■Ideal for bonding polyimide film substrate flexible printed circuits and reinforcement plates. ■Maintains long-term life.
For fancy seals and labels requiring transparency! Adhesive sheets with excellent smoothness.
"Hyper PET Transparent N50 Type S" is a PET adhesive sheet that excels in high transparency and smoothness. Due to the application of a stable and highly effective anti-static treatment on the back of the release PET50, work efficiency during printing and die-cutting processes is improved. It can be used for a wide range of applications, such as fancy seals and labels that require transparency. 【Features】 ■ High transparency and excellent smoothness ■ The surface is coated for easy adhesion, making it suitable for various printing ■ Anti-static treatment is applied to the back ■ Suitable for fancy seals and labels that require transparency *For more details, please refer to the PDF document or feel free to contact us.
![Oil Cooler Billet Heater [Electromagnetic Water Treatment Device Vol. 5]](https://image.mono.ipros.com/public/product/image/120/2000579460/IPROS32846659922728835312.jpeg?w=280&h=280)
Preventing slime scale! Introducing a case study of installation at a certain light metal industry in Shizuoka City.
We would like to introduce a technical case where an electromagnetic water treatment device, "Hydroflow," was installed as a measure against slime and scale in aluminum extrusion oil coolers and billet heaters. On June 12, 2010, a Hydroflow model P100 was installed on a 65A circulation line piping. After installation, there were no high-temperature shutdowns of the oil cooler or billet heater during the hot summer months from June to September. Additionally, before the Hydroflow treatment, the water was quite cloudy, but after 40 days of treatment, the water became clear. [Case Summary] ■ User Name: A certain light metal industry (Shizuoka City) ■ Purpose of Use - Measures against slime and scale in aluminum extrusion oil coolers and billet heaters ■ Device Name: Hydroflow model P100 *For more details, please refer to the PDF document or feel free to contact us.
![Freccon Bag and Truck Sheet Comprehensive Catalog [*Free Gift*]](https://image.mono.ipros.com/public/product/image/9ef/2000197602/IPROS55853836047569532015.gif?w=280&h=280)
A comprehensive catalog of container bags that reveals the "secret" to efficiently transporting items is available for free!
Truck sheets and flexible container bags (Flecon bags) are widely used in the manufacturing and construction industries for product packaging and transportation, as well as for the collection and transportation of waste and industrial waste. ★ Free comprehensive catalog that explains how to choose by application! ★ Not sure what shape or capacity is best? What about disposal after use? What is denier? Can it be used for agricultural products? ... Industry professionals will solve your storage and transportation concerns! 【Features】 ■ Semi-custom options available according to application ■ A wide range of optional items such as bag stands and carts with casters ■ Orders can be placed 24 hours a day through our online shop * For more details, please contact us or download and view the catalog.
Achieving a thickness of 30μm without solvents! The ultra-thin silicone sheet 'AR Ultra-Thin Film Silicone Sheet' has high transparency and is suitable for observation under a microscope!
The "AR Ultra-Thin Film Silicone Sheet," made of ultra-thin silicone, is a high-precision rubber sheet that can be used for various applications. It boasts excellent flexibility and can be finely processed. It can be used in a variety of applications, including cell culture, medical use, and analytical instruments. Additionally, it has high transparency, making it suitable for observation under a microscope. 【Features】 ■ Achieves a thickness of 30μm without solvents ■ Excellent flexibility and capable of fine processing ■ Usable in various applications such as cell culture, medical use, and analytical instruments *For more details, please refer to the PDF document or feel free to contact us.
Usable in all factories. It is a powerful magnet, so it can be used for removing iron powder, improving quality, and attracting metal pieces (ferromagnetic materials).
【 Usage Instructions 】 ● Can be used as a de-ironizing device. ● Contact food materials or industrial materials with the strong magnet bar to adsorb, de-iron, and capture fine iron powder and tiny magnetic substances. ● Install multiple magnet bars to prevent missing fine iron powder and tiny magnetic substances. 【 Important Points 】 ● A high surface magnetic flux density of the magnet bar is important. A higher surface magnetic flux density of the magnet bar strongly adsorbs, de-irons, and captures fine iron powder and tiny magnetic substances, preventing subsequent drop-off. ● It is important for the magnet bar to have many magnetic poles. Fine iron powder and tiny magnetic substances are attracted to the magnetic poles. Therefore, a magnet bar with more magnetic poles and a larger total surface area of magnetic poles will adsorb, de-iron, and capture more fine iron powder and tiny magnetic substances. 【 Specifications 】 Size: Diameter 22mm, Length 150mm Magnet: Rare earth magnet Stainless steel case: SUS316 Maximum surface magnetic flux density: 10,000 Gauss Magnetic pole spacing: 20mm Operating temperature: Below 80℃
Usable in all factories. It is a powerful magnet, so it can be used for removing iron powder, improving quality, and attracting metal pieces (magnetic materials).
【 Usage Instructions 】 ● Can be used as a de-ironizing device. ● Contact food materials and industrial materials with the strong magnet bar to adsorb, remove, and capture fine iron powder and tiny magnetic substances. ● Install multiple magnet bars to prevent missing fine iron powder and tiny magnetic substances. 【 Important Points 】 ● A high surface magnetic flux density of the magnet bar is important. A higher surface magnetic flux density of the magnet bar strongly adsorbs, removes, and captures fine iron powder and tiny magnetic substances, preventing subsequent drop-off. ● It is important for the magnet bar to have many magnetic poles. Fine iron powder and tiny magnetic substances are attracted to magnetic poles. Therefore, a magnet bar with more magnetic poles and a larger total surface area of magnetic poles will adsorb, remove, and capture more fine iron powder and tiny magnetic substances. 【 Specifications 】 Size: Diameter 22mm, Length 250mm Magnet: Rare earth magnet Stainless steel case: SUS316 Maximum surface magnetic flux density: 10,000 Gauss Magnetic pole spacing: 20mm Operating temperature: Below 80℃
Usable in all factories. It is a powerful magnet, so it can be used for removing iron powder, improving quality, and attracting metal pieces (ferromagnetic materials).
【 Usage Instructions 】 ● Can be used as a de-ironizing device. ● Contact food materials or industrial materials with the strong magnet bar to adsorb, remove, and capture fine iron powder and tiny magnetic substances. ● Install multiple magnet bars to prevent missing fine iron powder and tiny magnetic substances. 【 Important Points 】 ● A high surface magnetic flux density of the magnet bar is important. A higher surface magnetic flux density of the magnet bar strongly adsorbs, removes, and captures fine iron powder and tiny magnetic substances, preventing subsequent drop-off. ● It is important for the magnet bar to have many magnetic poles. Fine iron powder and tiny magnetic substances are attracted to magnetic poles. Therefore, a magnet bar with more magnetic poles and a larger total surface area of magnetic poles will adsorb, remove, and capture more fine iron powder and tiny magnetic substances. 【 Specifications 】 Size: Diameter 22mm, Length 300mm Magnet: Rare earth magnet Stainless steel case: SUS316 Maximum surface magnetic flux density: 10,000 Gauss Magnetic pole spacing: 20mm Operating temperature: Below 80℃
Usable in all factories. It is a powerful magnet, so it can be used for removing iron powder, improving quality, and attracting metal pieces (magnetic materials).
【 Usage Instructions 】 ● Can be used as a de-ironizing device. ● Contact food materials and industrial materials with the strong magnet bar to adsorb, de-iron, and capture fine iron powder and tiny magnetic substances. ● Install multiple magnet bars to prevent missing fine iron powder and tiny magnetic substances. 【 Important Points 】 ● A high surface magnetic flux density of the magnet bar is important. A higher surface magnetic flux density of the magnet bar strongly adsorbs, de-irons, and captures fine iron powder and tiny magnetic substances, preventing subsequent drop-off. ● It is important for the magnet bar to have many magnetic poles. Fine iron powder and tiny magnetic substances are attracted to the magnetic poles. Therefore, a magnet bar with more magnetic poles and a larger total surface area of magnetic poles will adsorb, de-iron, and capture more fine iron powder and tiny magnetic substances. 【 Specifications 】 Magnet Bar φ25×80mm 10,000G (12,000G) Size: Diameter 25mm, Length 80mm Magnet: Rare earth magnet Stainless Steel Case: SUS316 Maximum Surface Magnetic Flux Density: 12,000 Gauss with a high-performance gauss meter 10,000 Gauss with a standard gauss meter Magnetic Pole Spacing: 20mm Weight: Approximately 297g, Operating Temperature: Below 80℃
Usable in all factories. Due to its high magnetic strength, it adsorbs and removes fine iron powder and metal fragments (magnetic materials).
Magnet bars (magnet rods) are used to remove fine iron powder that may be mixed in rice, tea, meat, seasonings, beverages, food, pellets, and industrial materials. They are designed with a hygienic sanitary specification, making them suitable for food processing, and can be washed with water to be used as a magnetic filter. Equipped with a maximum surface magnetic flux density of 1,200 mT, the high-strength magnet with a diameter of 25 mm can attract and capture fine iron powder, and the exterior is made of stainless steel. Custom manufacturing is possible in lengths measured in millimeters.
Usable in all factories. With high magnetic strength, it adsorbs and removes fine iron powder and metal fragments (magnetic materials).
Magnet bars (magnet rods) are used to remove fine iron powder that may be mixed in rice, tea, meat, seasonings, beverages, food, pellets, and industrial materials. They are designed with a hygienic sanitary specification, making them suitable for food processing, and can be washed with water to be used as a magnetic filter. Equipped with a maximum surface magnetic flux density of 1,200 mT, the high magnetic force magnet with a diameter of 25 mm can adsorb and capture fine iron powder, and the exterior is made of stainless steel. Custom manufacturing is available in lengths measured in millimeters. 【Features】 ■ Uses neodymium or samarium-cobalt rare earth magnets ■ Recommended operating temperatures are below 80°C (Nd type), below 100°C (Nd type), and below 200°C (SmCo type) *For more details, please refer to the documentation.
Usable in all factories. With high magnetic force, it adsorbs and removes fine iron powder and metal fragments (magnetic materials).
Magnet bars (magnet rods) are used to remove fine iron powder that may be mixed in rice, tea, meat, seasonings, beverages, food, pellets, and industrial materials. They are designed with a hygienic sanitary specification, making them suitable for food processing, and can be washed with water to be used as a magnetic filter. Equipped with a maximum surface magnetic flux density of 1,200 mT, the high-power magnet with a diameter of 25 mm can adsorb and capture fine iron powder, and the exterior is made of stainless steel. Custom manufacturing is available in lengths measured in millimeters.
Usable in all factories. With high magnetic strength, it adsorbs and removes fine iron powder and metal fragments (magnetic materials).
Magnet bars (magnet rods) are used to remove fine iron powder that may be mixed in rice, tea, meat, seasonings, beverages, food, pellets, and industrial materials. They are designed with a hygienic sanitary specification, making them suitable for food processing, and can be washed with water to be used as a magnetic filter. Equipped with a maximum surface magnetic flux density of 1,200 mT, the high-strength magnet with a diameter of 25 mm can attract and capture fine iron powder, and the exterior is made of stainless steel. Custom manufacturing is possible in lengths measured in millimeters.
A magnet bar (magnet rod) with a diameter of 10mm can be used for removing metal foreign objects in narrow spaces. It attracts and captures iron powder and metal pieces (magnetic materials) with its magnetic force.
Magnet bars (magnet rods) are used for the removal of metal foreign substances such as iron powder and iron pieces mixed in industrial materials. They are equipped with a maximum surface magnetic flux density of 500mT and can attract and capture iron powder and metal pieces (magnetic materials) using a high-strength magnet with a diameter of 10mm. The exterior is made of stainless steel. * Custom lengths can be made in 1mm increments. * We also accept orders for lattice-type magnets. 【Features】 ■ Magnet rods can be manufactured in diameters of φ10, φ16, φ19, φ20, φ22, φ25, φ28, and φ32mm. ■ Neodymium or samarium-cobalt rare earth magnets are used. ■ Recommended operating temperatures are below 80℃ (Nd type), below 100℃ (Nd type), and below 200℃ (SmCo type). * For more details, please refer to the documentation.
Magnet bars are high-strength magnets ideal for removing metal foreign objects. They attract and capture fine iron powder and metal fragments (ferromagnetic materials).
Magnet bars (magnet rods) are ideal for removing fine metal contaminants such as iron powder that may be mixed in rice, tea, meat, seasonings, beverages, food, pellets, and industrial materials. They are designed with a hygienic sanitary specification, making them suitable for food processing, and can be washed with water to be used as a magnetic filter. Equipped with a maximum surface magnetic flux density of 1,000 mT, these high-power magnets with a diameter of 22 mm attract and capture fine iron powder. The exterior is made of SUS304 or SUS316L. Custom lengths can be manufactured in 1 mm increments. 【Features】 - Magnet rods can be produced in diameters of φ10, φ16, φ19, φ20, φ22, φ25, φ28, and φ32 mm. - Neodymium or samarium-cobalt rare earth magnets are used. - Recommended operating temperatures are below 80°C (Nd type), below 100°C (Nd type), and below 200°C (SmCo type). *For more details, please refer to the documentation.
[Essential for those troubled by stock shortages and delivery delays] Magnet bars capable of addressing foreign matter contamination measures, starting with food factories.
We provide high magnetic force magnet bars for the removal of fine iron powder and metal fragments with a short delivery time. They remove metal foreign substances mixed in powders and pellets using magnetic force. Designed for sanitary use and washable, they are suitable for food manufacturing factory lines where contamination prevention is required. We can also flexibly accommodate custom orders regarding size and magnetic force. If you are having trouble with delivery times, please feel free to contact us. 【Features and Benefits】 ■ Short delivery time and custom order options available ■ Made of SUS304 stainless steel and washable ■ High magnetic force options: three types of 800mT, 1000mT, and 1100mT ■ Efficiently removes foreign substances and metal fragments from powders and pellets
Introducing valuable and up-to-date information that you can hear by participating! Trends in backsheet safety testing required by IEC61730-1 and UL1703.
【Lecturers】 Part 1: Mr. Masamichi Yamamoto, Chief Researcher, New Energy Department, New Energy and Industrial Technology Development Organization (NEDO) Part 2: Mr. Hiroshi Matsuki, Section Chief, Research Department, Electric Safety Environment Research Institute Part 3: Mr. Miya Mochizuki, Director, Solar Cell Testing and Evaluation Division, Chemitox Co., Ltd. 【Venue】Tekuno Kawasaki, Kanagawa, Musashi-Mizonokuchi 【Date and Time】October 29, 2010 (Friday) 11:00 AM - 4:30 PM
