Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
451～480 item / All 744 items
Heating and cooling gases and droplets in the range of -30℃ to +120℃.
The CoolerHeater uses Peltier elements for heating and cooling samples. It allows for continuous temperature control from -30˚C to +120˚C. The system comes with a cooling pump for operation below 0˚C.
Real-time observation of physical changes in root structure is possible! Ideal for observing physical property information of valuable materials under tension, compression, bending, heating, and cooling!
The Deben product "Tensile Stage" enables the observation of "real-time physical changes in the root structure under applied load," which was not possible with conventional tensile testing. It can be mounted on sample stages such as SEM, AFM, optical microscopes, XRD, and XRM (μXCT), allowing for the application of stress (tensile, compressive) to the measurement sample and the measurement of shape changes. 【Main Features】 ■ Load cells from mN to 20kN ■ Tension, compression, bending ■ Heating and cooling ■ Software control Optional three-point and four-point wiring clamps are available to accommodate stage movement as needed. *For more details, please contact us or download the PDF materials for review.
This is an all-plastic slide unit suitable for scenes where metal cannot be used.
The honeycomb-style stage is a slide unit used for various positioning applications, from on-site work to equipment integration. The all-plastic "Skeleton Stage®" is a suitable slide unit for applications that traditional metal honeycomb-style stages cannot accommodate due to their weight, the risk of gas generation from anodizing treatment, or the potential for impurities in grease causing sliding failures. 【Features】 ○ Grease-free ○ Rust-resistant ○ Non-magnetic ○ Weather-resistant ○ Ultra-lightweight *For more details, please download the PDF or contact us.
This stage offers a rich variety where you can also choose the amount of movement for one full turn of the handle.
The Ari-groove stage is a slide unit used for various positioning applications, from on-site work to equipment integration. The "multi-functional feed screw stage" is a revolutionary feed screw stage that allows you to select the movement amount per handle rotation from 2mm, 5mm, or 10mm according to your usage needs. As special specifications, we also offer types with dual handles, handle extensions, and parallel configurations. The multi-functional feed screw stage, with its various features, smoothly slides over long strokes at regular pitches, making it very convenient to use even in tight spaces. 【Features】 ○ Four models available based on movement distance ○ [Selectable] movement amount per handle rotation ○ Adopts a visually easy-to-read center distribution color scale → Structure allows for easy rearrangement of the scale and clamp lever on both sides → Different types can also be easily custom-made *For more details, please download the PDF or contact us.
Aligning the handles in the same direction improves operability! Stabilizes and smooths positioning in the air.
The Ari-groove stage is a slide unit used for various positioning applications, from on-site work to equipment integration. The "pillar-mounted stage" can be differentiated according to its use, including pillar clamping block type, simple pillar type, and pillar bending mechanism type. The handles are aligned in the same direction, improving operability. The combination of single-axis, dual-axis, and tri-axis sliding mechanisms with the pillar fixing section allows for a variety of arrangements for positioning operations in mid-air. The stopper for the X-axis comes with a single clamp, while the stoppers for the Y-axis and Z-axis come with double clamps. 【Features】 ○ Strong fixation for stability → Provides stability with strong fixation using a tightening handle → Both φ16 holes in the cross direction can accommodate pillar insertion ○ Functionality enhancement with options → By attaching a separately sold dedicated CCD camera adapter (SP-A) to the upper X-axis, a CCD camera and lens can be set up in the vertical direction. *For more details, please download the PDF or contact us.
This is a stage that achieves completely no play and extremely smooth and fluid sliding.
The Ari-groove stage is a slide unit used for various positioning applications, from fieldwork to equipment integration. Regular miniature stages have drawbacks such as play and noisy spring mechanisms, but the "Front Lock Stage" eliminates any play while achieving extremely smooth and seamless sliding, all in a miniature size. Additionally, it comes standard with a stopper function that can be fixed at the base of the handle, providing excellent operability. 【Product Lineup】 ○FR-X: X-axis ○FR-XY: XY-axis ○FR-Z: Z-axis *For more details, please download the PDF or contact us.
This is a manually operated stage that rotates 360° smoothly and gently.
The fixed side of the rotating stage is marked with a scale (minimum reading 1°), allowing for a rough confirmation of the rotation angle. (The KTS-40 with a stage surface size of φ40mm has a minimum reading of 2°.) Additionally, please use the standard stopper according to your application. You can fix the rotating part of the stage at your preferred position. 【Features】 ○ A manually operated stage that rotates smoothly 360° ○ Load capacity is 68.6N (7kgf) ○ Stage surface: φ60mm *For more details, please download the PDF or feel free to contact us.
Improvement of the LED heat generation inspection fixture using a 3-axis (X, Y, Z) stage.
We are inspecting the heat generation of LEDs using a thermal camera. The thermal camera mounted on a magnetic stand must be positioned directly above the work (LED circuit board). The setup method involves supporting the thermal camera with one hand while loosening the knob with the other hand to determine the position. After that, slowly tighten the knob little by little to complete the setup. The reason for tightening the knob slowly is to prevent the set position from shifting. Since the work must be done carefully with both hands, it is very cumbersome and time-consuming. 【Features】 ○ High quality and low price achieved through skilled alignment technology of the grooves ○ Smooth sliding and high durability ○ The adoption of a clamp lever increases the holding power, and the lever's position can be freely set *For more details, please download the PDF or feel free to contact us.
Supports free combinations of microscope and stage. Achieves compactness through an integrated design.
We offer a unit equipped with an upright microscope on a high-performance, durable, and low-friction stage. The unit is compact and integrated, and it is also possible to combine the microscope with a USB camera. In addition to accommodating various customizations to meet your needs, we can also handle requests for small-scale production. 【Features】 ■ The microscope can be equipped with a combination of eyepiece and objective lens magnifications, allowing for a total of 16 different magnifications (x10 to x200). ■ By exchanging the eyepiece micrometer, it can be adapted for various applications such as measurement, inspection, alignment, and positioning. ■ It can be installed in a space-saving manner. * You can view materials introducing usage examples in the inspection process of plastic molding manufacturers from the "PDF Download."
![[Improvement Case] Peripheral Runout Measurement Fixture Using a Thin XY Rotary Stage](https://image.mono.ipros.com/public/product/image/eff/2001194691/IPROS27562866452620508726.jpeg?w=280&h=280)
Using a thin XY rotation stage. Here is an example where centering can be done in a short time.
We would like to introduce an improvement case for the outer diameter runout measurement jig used in the quality control department of a precision machinery company. The issue was that centering the workpiece was taking too much time. To address this, we adopted a stage that allows for movement along the X and Y axes and 360° rotation. This has enabled us to center the workpiece in a shorter time than adjusting the position by loosening bolts and moving the adjustment plate as done traditionally. 【Case Overview】 ■ Issue - Centering the workpiece was taking too much time. ■ Solution - We were able to center the workpiece in a shorter time than moving the adjustment plate by loosening bolts. - We also improved the accuracy of the outer diameter runout measurement. *For more details, please refer to the related links or feel free to contact us.
![[Improvement Case] Appearance Inspection Jig for Shaft End Face Using Long Stage](https://image.mono.ipros.com/public/product/image/0d2/2001194700/IPROS20815217388481221252.jpeg?w=280&h=280)
We will introduce a case where the usability of position movement has improved by using a long stage!
We would like to introduce an improvement case of the appearance inspection jig currently used in the inspection process of a metal processing company. The challenge was that the workability for moving the positions of the lighting and camera during the preparation for shooting was not good. To address this, we installed the lighting and camera on long stages. Since there is no need to tighten or loosen bolts as before, moving their positions has become easier, thus improving workability. [Case Overview] ■ Challenge - Poor workability for moving the positions of the lighting and camera during shooting preparation. ■ Solution - Improved workability for position movement. *For more details, please refer to the related links or feel free to contact us.
![[Video] DOVETAIL Stage](https://image.mono.ipros.com/public/product/image/d44/2001539409/IPROS496622294298453271.jpg?w=280&h=280)
Features of the Mirac Optical Company DOVETAIL Stage
I will explain the play, looseness, grinding, unevenness, and rattling of the dovetail stage. I will also explain the features of the dovetail stage made by Milacron Optical.
![[Video] Rotating Inclined Stage](https://image.mono.ipros.com/public/product/image/2001608133/IPROS805801374905585635.jpg?w=280&h=280)
A rotation-tilt stage that allows for flexible positioning.
Solve your problems during setting and positioning! The freedom of setting will be significantly improved. Please feel free to contact us if you have any requests.
Z Stage LMT Series
Installation of various components Hollow Z-stage with direct movement adjustment from the atmospheric side 【Features】 ○ Bakeable due to all-metal seals ○ Compatible with various ultra-high vacuum devices such as MBE systems due to Conflat flange specifications ○ Supports φ34CF to φ114CF ○ Facilitates easy movement into the vacuum by combining with various sensors and deposition sources ● For other functions and details, please download the catalog.
XYZ Stage XYZ Series
A hollow XYZ stage optimized for positioning adjustments of heating mechanisms, various introduction devices, and other components, enabled by a 3-axis movement mechanism. 【Features】 ○ Bakeable due to all-metal seals ○ Usable with various ultra-high vacuum devices such as MBE systems, thanks to the conflat flange specification ○ Compatible with φ70CF to φ203CF ○ X-Y movement possible with two adjustment knobs, allowing for precise movement using cross roller bearings ○ Enables multi-axis motion transmission into a vacuum when combined with transfer rods, rotary introduction devices, linear introduction devices, etc. ● For other functions and details, please download the catalog.
Porous adsorption stage
Reduce defect rates due to pickup errors Porous adsorption stage 【Features】 ○ Reduces pickup errors caused by chip floating and rotation ○ Capable of full surface adsorption of wafer sheets ○ Eliminates warping of wafer sheets ○ Stabilizes needle lift amount ○ Improves operational efficiency ○ Prevents foreign matter contamination due to plating peeling ○ Custom orders available for various materials and shapes ● For other functions and details, please download the catalog.
Reduce downtime and defect rates caused by chip adhesion errors and bonding mistakes!
The "Porous Adsorption Stage" is a stage that can reduce the operational rate decline due to chip adsorption errors and the defect rate caused by bonding errors. It allows for full adsorption of wafer sheets and can also eliminate warping of the wafer sheets. Furthermore, it resolves foreign matter contamination (plating debris) caused by plating peeling during wafer adsorption. Custom orders can accommodate various materials and shapes. Please feel free to consult us. 【Features】 ■ Reduces pickup errors caused by chip floating and rotation ■ Allows for full adsorption of wafer sheets ■ Capable of eliminating warping of wafer sheets ■ Stabilizes the amount of needle lift *For more details, please refer to the catalog or feel free to contact us.
High precision with low profile and high rigidity! By using mechanical components, you can reduce the effort of designing from scratch.
The "SK...W" is a rotating stage that incorporates IKO cross roller bearings into the rotation mechanism, achieving a surface runout of 5μm or less on the top surface of the table. It employs IKO cross roller bearings that exhibit high rigidity in various directions within the rotation mechanism. Additionally, the table allows for direct attachment of equipment tables and inspection targets, reducing the effort required to design a rotating stage from scratch using mechanical components. 【Features】 ■ Incorporates IKO cross roller bearings into the rotation mechanism ■ Achieves a surface runout of 5μm or less on the top surface of the table ■ Utilizes IKO cross roller bearings in the rotation mechanism ■ Realizes a low profile by directly using cross roller bearings with the table ■ Allows for direct attachment of equipment tables and inspection targets to the table ■ Reduces the effort required to design a rotating stage from scratch using mechanical components *For more details, please refer to the PDF document or feel free to contact us.
A compact XYθ motion alignment stage with a low profile! The lineup consists of an X table and a θ table as the basic configuration.
The "SA…DE" is an alignment stage that uses a linear way L in the linear motion guide and a cross roller bearing in the rotary motion guide. It employs a direct drive system for the drive unit, achieving low-profile and compact XYθ motion. By incorporating a high-resolution linear encoder and implementing full closed-loop control, it achieves high resolution and high precision. 【Features】 ■ Compact XYθ table ■ Free combination of XYθ ■ Thin and compact ■ High resolution and high response *For more details, please download the PDF or feel free to contact us.
An infinite rotation stage featuring a worm gear mechanism! The vibration amount on the table surface is achieved to be less than 5μm.
The "SK…W" is a rotating stage that incorporates IKO cross roller bearings into its rotation mechanism. By directly using cross roller bearings for the table, it achieves high precision in rotational runout. The table allows for direct attachment of equipment tables or inspection objects, reducing the effort required to design from scratch using mechanical components. 【Features】 ■ High precision ■ Low profile and high rigidity ■ Reduced design workload *For more details, please download the PDF or feel free to contact us.
An XY stage with motors arranged in parallel! Achieves excellent workability through its unique structure.
The "PD…S" that we handle is a parallel drive stage with the motor positioned in only one direction. It allows for easy operation from any direction except the side where the motor is located. The motor is fixed in place and does not move even when the table is in operation. Unlike typical stages, there is no need for wiring or cable carriers for moving parts, resulting in a simple, lightweight, and space-saving appearance. 【Features】 ■ Excellent operability achieved through a unique structure ■ Low profile with a simple appearance ■ Flexible and diverse customization options available *For more details, please download the PDF or feel free to contact us.
The rotation guide of the direct drive system uses IKO cross roller bearings! It achieves an extremely low profile height.
The "SA…DE/T" is an alignment stage that achieves low-profile and compact XYθ motion using a direct drive system. Conventional rotary types had limitations on the rotation angle, but the newly added infinite rotation type (this product) supports motion angles exceeding 360 degrees and continuous rotation. Additionally, by fully closed-loop controlling the stage with a built-in high-resolution encoder using a direct drive system, high resolution and high precision are achieved. 【Features】 ■ Free combination of XYθ axes ■ Thin and compact ■ High resolution and high response *For more details, please download the PDF or feel free to contact us.
The emergence of the new structure XY stage.
The Parallel Drive Stage PD…S is a unique precision positioning XY stage developed by IKO, which achieves a reduced cross-section by incorporating a mechanism that converts the linear motion of pole screw actuators arranged in a two-axis parallel configuration into XY motion. Unlike conventional XY stages that stack single-axis actuators, this stage has no moving motors or cables around it, making it easier to access the stage from the outside and allowing for a highly flexible device design that does not limit the working area. The linear guide incorporates a maintenance-free series of C-loop linear ways, resulting in a compact and highly durable stage.
XY Thin Profile Alignment Stage Series
YRA-070: The smallest alignment stage in the series. Ideal for assembling small devices. Can be modified to a non-declutching specification with αStep replacement. YRA-071: Capable of accommodating various motor change requests. Ideal as a base for multi-axis combinations. YRA-131: Ideal for bonding medium to small-sized LCDs and wafers. Capable of accommodating various motor change requests. YRA-200: The largest high-load specification in the series. Ideal for areas where load is applied during work bonding. Capable of accommodating various motor change requests.
Achieves high tracking performance of 0.1μm ± 20nm.
We will make clean steps at the submicron level without applying feedback such as scaling.
MOTORIZED VERTICAL LINEAR STAGE
Horizontal Plane 1/2 Wedge Z Stage Upright Z Stage Horizontal Plane 1/4 Wedge Z Stage Horizontal Plane Four-Sided Flat Roller Guide Z Stage
Since it is a dual-sided operation type, it is possible to improve work efficiency!
Adopting a push-pull system! Ideal for reducing indoor air conditioning running costs! Ensuring a wide working space!
Are you struggling with securing cameras and lighting in fixed positions with different angles? Here is an application test stand that achieves angle adjustment, load capacity, and direct fixation of cameras and lighting.
There is the FLEX-L series for line scan camera inspection environments and the FLEX-A series for industrial camera inspection environments. There is no need for brackets or L-shaped fittings for fixing cameras and lighting for testing. It is a dedicated stage that overcomes the unique challenges of line scan cameras, which require bold variability in camera and lighting angles as well as delicate fine adjustments. It also has load-bearing capabilities and can be used in actual operations.
What is needed to achieve optical conditions that explore the edge? Experimental equipment specifically developed for a dedicated imaging environment for setting optical conditions.
The main column features a reproducible angle step variable mechanism, and the camera and lighting unit are equipped with a dedicated angle adjustment mechanism for line scan cameras, allowing adjustments based on the desired area from the captured images. This is the FLEX-L series, developed as a dedicated experimental facility for image processing environments, based on achievements in line scan camera applications and the pursuit of optical conditions for defect detection. There is also the FLEX-A series, designed for environments using industrial cameras (area cameras).
Testing equipment for image processing environments applicable to all applications of sample testing, inspection device development, image processing libraries, AI, and algorithm development.
What are the challenges you face during sample tests, library tests, and so on? How do you secure the cameras and lighting, which can change with each project? How do you set the angles of the cameras and lighting based on the shape of the workpiece? This is an all-in-one inspection station that can solve both of these issues on-site. We also have the FLEX-L series designed for line scan camera environments.
