We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Heater.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

Heater Product List and Ranking from 477 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated: Aggregation Period:Jul 29, 2026~Aug 25, 2026
This ranking is based on the number of page views on our site.

Heater Manufacturer, Suppliers and Company Rankings

Last Updated: Aggregation Period:Jul 29, 2026~Aug 25, 2026
This ranking is based on the number of page views on our site.

  1. 東立電機 Kanagawa//Industrial Electrical Equipment
  2. 西都電機 Osaka//equipment
  3. 日本ヒーター Tokyo//Industrial Electrical Equipment
  4. 4 三洋熱工業 Aichi//Industrial Electrical Equipment
  5. 5 坂口電熱 Tokyo//Industrial Electrical Equipment

Heater Product ranking

Last Updated: Aggregation Period:Jul 29, 2026~Aug 25, 2026
This ranking is based on the number of page views on our site.

  1. Tōritsu Electric Co., Ltd. Business Introduction <Variety and Small-Batch Production Factory> 東立電機
  2. Super High-Temperature Heater 'STS-1100' 三洋熱工業
  3. Heater with radio wave permeability for ADAS/automated driving sensors!
  4. 4 Aluminum billet heating / Permanent magnet type "Magnet Heater" 日鉄物産マテックス
  5. 5 Transparent film heater Heat Lab. Corporation

Heater Product List

1201~1230 item / All 2757 items

Displayed results

Underfloor heating heater "Amomat"

The same "radiant heat" as the sun, an indescribable comfort! Exceptional durability for a long lifespan.

"Amomat" is a floor heating heater that uses amorphous alloy ribbon in its heating element. Compared to conventional electric heating wires, it has a significantly larger heating surface area, releasing a large amount of radiant heat to comfortably warm the indoor space. Since it does not have moving parts like boilers or hot water pipes for heating, it has fewer malfunctions and does not require regular equipment replacement. This product, invented in Japan, utilizes amorphous alloy and has been made into a heater in Israel, characterized by excellent heating performance and durability. It is loved in 21 countries worldwide, including European nations such as Switzerland and Sweden, as well as Canada and Russia, which are known for their floor heating. 【Features】 ■ Gently wraps warmth from the feet up ■ Does not use fire and does not pollute the air ■ No hot water circulation, maintenance-free ■ Provides the same warmth at a lower temperature setting than warm air systems ■ Allows for heating only the necessary areas by dividing the room ■ Generates heat from beneath the floor, eliminating heat loss *For more details, please download the PDF or feel free to contact us.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Halogen Point Heater HPH Series Catalog

High-temperature heating, raising temperature to 1000℃ to 1400℃ in just 5 seconds! Instant heating, reduced heating time.

This document is a comprehensive catalog introducing the halogen point heater "HPH Series." It includes various applications such as soldering of printed circuit boards and preheating, an overview of the products, and tables showing infrared absorption rates. Additionally, it presents specifications and dimensional drawings for various types in the series, including ultra-compact, compact, medium, vacuum chamber compatible, ultra-high temperature, large, and high-output models. [Contents] ■ Application examples and product introduction ■ Specifications and dimensional drawings ■ Research and development lab kits ■ Heater controllers *For more details, please download the PDF or feel free to contact us.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Environmentally resistant double-glass tube type hot air heater

Heat Wind Heater Environmentally Resistant Type DGH Series - Heating gases with flexible temperature control.

Features ◎ Since the heating element, thermocouple, and electric wires do not come into direct contact with the heated fluid, it can be used for heating steam and some corrosive gases. ◎ This heater eliminates dust and gas emissions to the greatest extent possible. ○ The heating element and thermocouple are sealed inside the inner quartz tube. The gas is indirectly heated by passing through the gap between the inner and outer quartz tubes. △ It is very tough compared to regular heaters, but the limits of the metal case (made of stainless steel), quartz glass, and heat-resistant rubber will depend on the usage conditions. × It is not suitable for heating fluids that contain substances that tend to remain inside the heater. ◆ Discharges high-temperature hot air at 500℃ in a short time. ◆ Equipped with a thermocouple at the hot air discharge section, allowing for easy temperature management. ◆ Can directly heat nitrogen, making it suitable for experiments with anaerobic microorganisms. ◆ Simply supply air and electrically heat it for discharge; it is safe and clean as there are no flames. ◆ The capacity of the hot air heater can be manufactured in a wide range from 100W to 12kW. ◆ The outer diameter ranges from φ13 to 140mm, and the heater section is compact.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-contact hot plate Halogen double-sided heater HDSH-60

Non-contact hot plate Halogen double-sided heater HDSH-60. It is a hot plate that does not pull threads due to its non-contact design.

Features of the Halogen Double-Sided Heater HDSH-60 1) It can heat both sides with a single heater. A halogen lamp is integrated at the center of the heater, and a reflector is designed to enable heating on both sides. It can be placed between the heating target objects, allowing both sides to be heated with just one heater. This makes it possible to reduce weight and save energy. 2) It can be connected and used with multiple units. Heaters can be lined up in multiple units according to the heating target. 3) The heater's startup time is just a few seconds. Since it uses a halogen lamp as the heating element, the startup time is very fast. 4) It is suitable for heating metals. It emits short wavelengths that are ideal for heating metals, making it perfect for this purpose.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Finger size halogen point heater

Industry's smallest finger size

Features of HPH-12 1) It is ultra-compact and can heat a point of φ1.5 to 750–800°C. The control of heating temperature can be done through irradiation time control or voltage control. The lamp life will be reduced to one-third, but high-frequency flashing operation will decrease the lifespan. Slow ramp-up and ramp-down of voltage can improve lifespan. 2) It achieves perfect clean heating and can also heat in clean rooms or vacuum environments. Note that when placed in a vacuum chamber, there will be some gas release from inorganic adhesives initially, so pre-vacuum treatment is necessary. Additionally, heat dissipation decreases in a vacuum, so a water cooling unit must be installed in the main body. 3) It has made it possible to heat in narrow spaces that could only be addressed by optical fibers or lasers in the past. Compared to fiber optic heating and laser heating methods, it offers overwhelming efficiency of over 10 times, lower cost, energy savings, and safety. 4) There are no restrictions on the direction of lighting, allowing for use while moving. It consists of a high-efficiency condenser lens with a front protective glass and a lamp unit, both of which can be replaced. For continuous lighting, please install the air cooling unit ACU-8.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Halogen Point Heater HPH-30 Series

The temperature rises to about 1350°C with a focal length of 15mm.

1) It can heat a small point of φ5 up to 1350°C. 2) It achieves perfect clean heating, and heating in clean rooms or in a vacuum is also possible. 3) It has become possible to heat in narrow spaces that could only be addressed by optical fibers or lasers in the past. 4) There are no restrictions on the lighting direction, allowing for use while moving. 4) There are no restrictions on the lighting direction, allowing for use while moving.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Medium Halogen Point Heater HPH-50 Series

The φ5mm point can be heated to 1450°C in a short time.

1. The Φ5mm point can be heated to 1450°C in a short time. The HPH-50 is a halogen point heater that concentrates the light from a halogen lamp onto a single point using a focusing lens to achieve high-temperature heating. The temperature varies depending on the infrared absorption rate of the heated object, but it can heat a point with a focal length of 20mm to approximately 1450°C. The method of controlling the heating temperature can be done by controlling the irradiation time or the voltage. By adjusting the voltage to 90%, the lamp life can be tripled. 2. It achieves perfect clean heating and can also heat in clean rooms or under vacuum conditions. 3. It has become possible to heat in narrow spaces that could only be addressed by optical fibers or lasers in the past. Compared to optical fiber heating methods and laser heating methods, it offers overwhelming efficiency that is more than 10 times higher, low cost, energy savings, and safety. 4. There are no restrictions on the direction of illumination, allowing for use while moving. 5. By adopting a water-cooled cooling method, it operates extremely quietly even during operation.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Parallel Beam Halogen Line Heater HLH-40 Series

It can be heated to 900°C in a band shape. It can also be installed in narrow spaces.

Features of HLH-40 1) Can be heated up to 900°C in a strip The high-performance halogen line heater HLH-40 is a strip infrared heating device that uses rod-shaped halogen lamps. It has a short heating time and can heat in a strip with a parallel mirror width of 40mm and parallel light (focal distance ∞). 2) High output in a compact size It uses a high-output 5kW halogen lamp and has been miniaturized. The height of the parallel light mirror is 40mm, allowing it to be installed in narrow spaces. 3) It is a higher model than HLH-35 It can be controlled at intervals of 40mm, making it ideal for surface heating with multiple units lined up.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Far Infrared Point Heater FPH-50

The emission frequency can be changed by varying the voltage.

Features of FPH-50 1) It is medium-sized. Diameter Φ50mm x Height 67mm. It can be installed in the gaps of machines. The focal diameter is a minimum of φ5mm. 2) It is clean. With non-contact heating and no medium, it allows for ultra-clean heating. 3) It has stable radiation characteristics. 4) It has a fast rise time, which can shorten heating time. 5) Frequency management of the heating element is possible. By adjusting the temperature of the heating element, the peak frequency of far-infrared radiation can be managed.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Focusing Type Far Infrared Line Heater FLH-30 Series

You can manage the frequency of the heating element.

It can heat a narrow area. It has a quick startup, allowing for reduced heating time. It enables high-precision temperature control. It can manage the frequency of the heating element. It is good at heating glass due to far infrared radiation. It is ultra-compact. It is clean.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Focusing Type Far Infrared Line Heater FLH-55 Series

You can manage the frequency of the heating element.

◆ It can focus light and heat in a linear shape. ◆ It has a quick startup, allowing for reduced heating time. ◆ It enables high-precision temperature control. ◆ It is effective for heating glass due to its far-infrared capabilities. ◆ It is clean. ◆ When used in combination, it can achieve surface heating.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Energy-saving high-speed heating far-infrared panel heater PHX series

Energy-saving high-speed heating far-infrared panel heater PHX series

1. The PHX is a high-speed heating panel heater that reaches 650°C in just 20 seconds. Previously, idling took 30 minutes, but now the idling time can be reduced to zero. 2. The radiation wavelength characteristics are outstanding! The efficiency of radiant heat increases the most when the heater's radiation wavelength matches the absorption wavelength of the heated object. The PHX is a high radiator (emissivity 0.95) that is close to a perfect radiator, making it efficient across all wavelengths, allowing for uniform heating and drying in a short time. It transmits large amounts of heat at the speed of light, enabling miniaturization of the equipment and reduction of heating and drying times. 3. Uniform temperature distribution. The surface has a lattice structure, providing good radiation distribution. Furthermore, the panel heaters made of two or four units are independent, resulting in good temperature distribution within the plane, allowing for uniform heating of the heated object. 4. Clean. The metal heating element is coated with a special ceramic. It is a panel heater composed of a dust-free ceramic heater coated with far-infrared radiation ceramic and a ceramic case. 5. High-precision temperature control. The sensor is embedded in the heater, allowing for high-precision control of the temperature of the heated object.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial Carbon Line Heater CFLH-40 Series

Radiates mid-infrared close to the absorption wavelength of water.

Features of CFLH-40 1. Emits mid-infrared radiation close to the water absorption wavelength When the heating element temperature is set to 700°C, the peak wavelength of the emitted energy is approximately 3μm, making it ideal for heating water droplets, aqueous solutions, and other hydrated compounds. 2. Optimal for resin heating As it is a carbon fiber heating element derived from polymer compounds, it excels in heating resins. 3. Fast startup Reaches 80% in just 2.7 seconds and 100% in 8.5 seconds. 4. Flexible lighting direction Due to the use of flexible materials for the heating element, it can be processed into line-type or ring-type shapes. The heating element itself is lightweight and can be oriented vertically, horizontally, or diagonally without restriction. Moreover, it also boasts excellent impact resistance.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial Focusing Carbon Line Heater CFLH-45 Series

Radiates mid-infrared close to the absorption wavelength of water.

Features of CFLH-45 1. Emits mid-infrared radiation close to the water absorption wavelength When the heating element temperature is set to 700°C, the peak wavelength of the emitted energy is approximately 3μm, making it ideal for heating water droplets, aqueous solutions, and other hydrated compounds. 2. Optimal for resin heating As it is made from carbon fiber derived from polymer compounds, it excels at heating resins. 3. Fast startup Reaches 80% in just 2.7 seconds and 100% in 8.5 seconds. 4. Flexible lighting direction Due to the use of flexible materials for the heating element, it can be processed into line-type or ring-type shapes. The heating element itself is lightweight and can be oriented vertically, horizontally, or diagonally without restriction. Additionally, it is highly resistant to impact.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Medium Halogen Point Heater HPH-60 Series

It can heat a small φ5 point up to 1400℃.

1) The small φ5 point can be heated up to 1400°C. The HPH-60 is a halogen point heater that concentrates the light from a halogen lamp to achieve high-temperature heating. The focal diameter is approximately φ5mm at a focal distance of 15mm, and it can heat depending on the target object up to about 1400°C. The required time for soldering is approximately 5 seconds. The heating temperature varies depending on the type of target object. Temperature control is achieved through irradiation time control or voltage control. The lamp life will be reduced to one-third, but it is acceptable to apply 110% overvoltage. *Frequent flickering operation will reduce the lifespan. Slow ramp-up and ramp-down of voltage can improve lifespan. 2) It achieves perfect clean heating and can also heat in clean rooms or in a vacuum. *When placed inside a vacuum chamber, there may be some gas release from inorganic adhesives initially, so pre-vacuum treatment is necessary. Additionally, since heat dissipation decreases in a vacuum, it is necessary to install a water cooling unit on the main body. 3) There are no restrictions on the direction of illumination, and it can be used while moving. *When mounting movable parts, significant impact will occur when stopping, so be sure to implement shock prevention measures.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-compact Focusing Halogen Line Heater HLH-30 Series

It can be heated linearly up to 1000°C in a compact size.

1) It can be heated up to 1000°C in a compact and linear form. The ultra-compact halogen line heater HLH-30 is a focused infrared heating device that uses a rod-shaped halogen lamp. The product concept is "small size." With a reflector width of 30mm and a height of 34mm, it is extremely compact. The reflector surface adopts a composite curved surface of an ellipse and a circle, overcoming the disadvantages of miniaturization. While maintaining high performance, it has been minimized to the extreme, allowing it to reach a maximum heating temperature of approximately 1000°C, even in a super compact form. 2) It achieves perfect clean heating and can also heat in clean rooms and vacuum environments. The water-cooled type can be used in vacuum containers. When placed inside a vacuum chamber, there may be some gas release from the inorganic adhesive initially, so pre-vacuum treatment is necessary.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance focusing halogen line heater HLH-55 series

It can be heated linearly up to a maximum of 1300°C.

1) It can be heated linearly up to a maximum of 1300°C. The high-performance halogen line heater HLH-55 is a focused infrared heating device that uses rod-shaped halogen lamps. The product concept is "maximum performance," capable of outputting approximately 2 kW per 100 mm of the focusing mirror. The linear focusing type allows for overall heating by placing the workpiece on a conveyor and irradiating it with the heater, in addition to linear heating. Furthermore, by using it at a distance from the focal point, wider heating can be achieved. 2) It achieves perfect clean heating and can also be used for heating in clean rooms and vacuum environments. The water-cooled type can be used in vacuum containers. When placed inside a vacuum chamber, there may be some gas release from the inorganic adhesive initially, so pre-vacuum processing is necessary.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-compact parallel beam halogen line heater HLH-35 series

It can be heated linearly up to 900°C in a compact size.

1) It can be heated linearly up to 900°C in a compact size. The ultra-compact halogen line heater HLH-35W/f∞ is a line-type infrared heating device that uses rod-shaped halogen lamps. The product concept is "small size." With a reflector width of 35mm and a reflector height of 36mm, it is extremely compact. The reflector surface adopts a composite curved surface of an ellipse and a circle, overcoming the disadvantages of miniaturization. While maintaining high performance, it has been minimized to the extreme, allowing for a maximum heating temperature of approximately 1000°C even in ultra-compact form. 2) It achieves perfect clean heating and can also be used for heating in clean rooms and under vacuum conditions. The water-cooled type can be used in vacuum containers. When placed inside a vacuum chamber, there may be some gas release from inorganic adhesives initially, so pre-vacuum treatment is necessary. 3) When used in combination, it can provide surface heating. When used together, the irradiation power density reaches 35w/cm², allowing for heating a large area to nearly 1000°C.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance parallel beam halogen line heater HLH-60 series

It can be heated in a band shape up to a maximum of 850℃.

1) It can be heated in a strip shape up to 850°C. The high-performance halogen line heater HLH-60 is a strip infrared heating device that uses rod-shaped halogen lamps. It has a short heating time, a parallel mirror width of 60mm, and parallel light (focal length ∞), allowing for strip heating. By equipping the HLH-60 with an infrared recovery-type reflector, it reduces stray light and improves the utilization rate of infrared. It also allows for long-length heating, with an effective length of the parallel mirror that can be produced from 100mm to 3000mm. For surface heating, it is more suitable to arrange multiple units of "HLH-35W/f∞." 2) It achieves perfect clean heating and can also be used for heating in clean rooms and vacuum environments. The water-cooled type can be used in vacuum containers. When placed inside a vacuum chamber, there may be some gas release from the inorganic adhesive initially, so pre-vacuum treatment is necessary.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Small Hot Air Heater" ABH-13A

The gas can be heated to about 900°C.

Features of the Small Hot Air Heater 13A The ABH series has a heating element that comes into direct contact with the heated gas. Although the outer diameter is small, it can heat the passing gas to about 900°C due to the adoption of a large surface area high-density heating element with good heat transfer efficiency. The ABH-13A series is the best-selling model of small hot air heaters. The ABH-13A is compact, low-cost, and powerful, making it easy to use. It incorporates a heating element ranging from 100W to 1000W within a φ13 metal tube case. The ABH-13A can heat the passing gas to a general temperature of 900°C and a maximum of 1000°C. It is suitable for gas flow rates of 3 to 40 liters per minute. Accurate temperature control can be achieved using a thermocouple at the outlet. Since it heats using transparent gas, it is ideal for photography and video recording. The tip has internal threads, allowing for various fittings to be attached. There are metal tube cases of various lengths available. A ceramic paper protective tube is provided as a measure against near-miss accidents. For safety and health measures, the temperature of the heating element can be monitored to prevent overheating.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Robust Large Hot Air Heater" ABH-43NM

It is a robust hot air heater with redundant design.

The ABH series features a heating element that comes into direct contact with the heating gas. By adopting a high-density heating element with a large surface area for efficient heat transfer, it can heat the passing gas to approximately 900°C. It is a robust hot air heater with a redundant design. The ABH-43NM is a higher model than the ABH-34NM. It incorporates a 5kw to 6kw heating element within a φ42.7 metal tube case. Please use it when a gas flow rate of 200 to 500 liters per minute is required. Accurate temperature control can be achieved using a thermocouple at the outlet. Since the temperature of the heating element can be monitored, safety measures against overheating can be implemented. The tip is threaded internally, allowing for various fittings to be attached. The ABH-43NM can accommodate a terminal box. There are metal tube cases available in various lengths. For safety and health measures, the temperature of the heating element can be monitored to prevent overheating. It is ideal for photography and video recording as it heats using transparent gas. The ABH-43NM is a popular model for use as a heater for deburring resin.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Short Size Parallel Large Hot Air Heater" ABH-38X6

Since there is an internal thread at the tip, various fittings can be attached.

It is a simple structure with threads cut at both ends of the stainless steel pipe. ABH-38X6 is a short, thick-bodied model of ABH-34N. A heating element of 2.5kW to 5kW has been incorporated into a φ38 metal tube case. Please use it when a gas flow rate of 200 to 400 liters per minute is required. Accurate temperature control can be achieved using a thermocouple at the outlet. Since the temperature of the heating element can be monitored, safety measures against overheating can be implemented. With internal threads cut at the tip, various fittings can be attached. There are metal tube cases of various lengths available. For safety and health measures, the temperature of the heating element can be monitored to prevent overheating. Since transparent gas is used for heating, it is ideal for photography and video recording.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Parallel Large Hot Air Heater" ABH-61X6

A heating element of 20kW to 24kW has been incorporated into a metal tube case with a diameter of 60.5 mm.

The ABH-61X6 is a higher model than the ABH-50X6. It incorporates a heating element with a power range of 20kW to 24kW in a metal tube case with a diameter of 60.5mm. By using a thermocouple at the outlet, precise temperature control can be achieved. Since the temperature of the heating element can be monitored, safety measures against overheating can be implemented. The tip has internal threads, allowing for various fittings to be attached. There are metal tube cases of various lengths available. For safety and health measures, the temperature of the heating element can be monitored to prevent overheating. It uses transparent gas for heating, making it ideal for photography and video recording.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Parallel Large Hot Air Heater" ABH-102X6

A heating element of 18kW to 30kW has been incorporated into a φ101.6 metal tube case.

The ABH-102X6 is a higher model than the ABH-61X6. It incorporates a heating element ranging from 18kW to 30kW in a metal tube case with a diameter of φ101.6. By using a thermocouple at the outlet, precise temperature control can be achieved. Since the temperature of the heating element can be monitored, safety measures against overheating can be implemented. The end is threaded internally, allowing for various fittings to be attached. There are metal tube cases available in various lengths. For safety and health measures, the temperature of the heating element can be monitored to prevent overheating. Since it uses transparent gas for heating, it is ideal for photography and video recording.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"High Temperature Medium Hot Air Heater" ABH-22A

The gas can be heated up to 1050°C.

A 4.1kW heating element has been incorporated into a φ22 metal tube case. Please use it when a high-temperature airflow of 100 liters/min is required. By using a thermocouple at the outlet, precise temperature control can be achieved. Since the heating element temperature can be monitored, safety measures against overheating can be implemented. The tip has either internal or external threads, allowing for various fittings to be attached. The ABH-22A can use a T-type nozzle to utilize hot air like a brush. The ABH-22A is a higher model than the ABH-19A, and the next higher model is the ABH-28A.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"High-Temperature Parallel Large Hot Air Heater" ABH-28AMX

The gas can be heated up to 900°C.

The ABH-28AMX is a hot air heater that can be assembled with either 3 or 6 units of the ABH-28AM3. It can heat the passing gas up to 900°C. By using a thermocouple at the outlet, precise temperature control can be achieved. It has internal threads at the tip, allowing for the attachment of various fittings. There are metal tube cases available in various lengths. For safety and health measures, the heating element temperature can be monitored to prevent overheating. Since it uses transparent gas for heating, it is ideal for photography and video recording.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hot Air Heater Lab Kit - Burner Type

Vertical injection of high-temperature air for heating and disinfection. Both hands are free, with ON-OFF control via a foot switch.

Since it is a kit, you can use factory air for hot air sterilization instead of a gas burner. It emits high-temperature hot air at 600°C in a short time. You can turn it ON and OFF with a foot switch. It is safe compared to gas.

  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hot Air Heater Lab Kit LKABH-13AM+HCAFM

Since it comes as a kit, you can easily use the hot air heater.

It comes as a kit, making it easy to use the hot air heater. It can discharge high-temperature hot air of around 900°C in a short time. Just supply air, heat it, and blow it out! It is safe and clean since there are no flames. The hot air discharge section is equipped with a thermocouple, allowing for easy temperature management. Various attachments can be mounted on the M12 internal thread section. Since there are no flames, photography is clear!

  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hot Air Heater Lab Kit LKABH-34NM

Heating gas to high temperatures with precise temperature control.

It comes as a kit, making it easy to use a hot air heater. It can discharge high-temperature hot air of about 900°C in a short time. Just supply air, heat it, and blow it out! It is safe and clean since there are no flames. The hot air discharge section is equipped with a thermocouple, allowing for easy temperature management. Various attachments can be mounted on the internal screw part of the M32. Since there are no flames, photography is clear!

  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration