Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
1861～1890 item / All 3811 items
It is a compact, lightweight, pocket-sized digital ultraviolet meter.
The MI1UV-50N ultraviolet intensity meter is a compact, lightweight, pocket-sized digital ultraviolet measuring device designed to measure the total intensity of both near ultraviolet UVA waves (315-400nm) and medium ultraviolet UVB waves (280-315nm).
Ultraviolet Intensity Meter (UVA/UVB)
The UV intensity meter MI1UV-65N is a new type of UV intensity meter that automatically calculates and displays the UV index based on the intensity of UVA and UVB.
Easily measure the crushing force with a specific amount of compression.
Despite being an inexpensive lever type, it achieves high reproducibility.
Evaluate the smoke density of the flue gas and check the combustion efficiency.
Accurate measurement in 1 minute If there is too much smoke from the smoke guide, it can cause soot buildup in the boiler, necessitating frequent service visits. This is where the smoke tester comes into play. It draws in combustion exhaust gases and compares the smoke that adheres to the filter paper with the smoke scale to determine the smoke density. It can be used on all burners and can measure the smoke density accurately within one minute. It has obtained TÜV By RgG (German standard) certification and is widely accepted as a global standard method, earning trust through its long-standing performance in the burner industry.
Field magnetic flux density meter
●Compliant with JIS C 1910 ●Maintains basic performance while achieving a more affordable price ●3 cm² magnetic field sensor ideal for spatial distribution surveys ●Selectable display units (T, A/m, G) ●Easy operation for effortless measurement ●Includes a compact portable case for convenience
With a probe, lightweight and compact, it can measure surface resistance for beds, mats, desks, and chairs in four different ways.
Everything necessary for measurement is included, so you can easily perform four types of measurements.
Tabletop small phase contrast microscope / Model number M2554SM-2N
■Usage Examples ●Bacterial testing in the dental field ●Identification of spores and phytoplankton ●Identification of protozoa ●Identification of bacteria, fungi, mites, etc. ●Contamination testing in machine oil, emulsion testing
You can measure electromagnetic waves with frequencies ranging from 30 to 300 Hz and check the surrounding environment.
● Electromagnetic waves below 300Hz are referred to as extremely low frequency electromagnetic waves or electromagnetic fields, and their correlation with health effects is being highlighted. ● Sources of electromagnetic waves include high-voltage power lines, computers, hair dryers, induction cookers, electric blankets, and more. ● The measurement units can be selected as either μT (microtesla) or mG (milligauss). ● The measurement range is from 0.01 to 199.9μT and 0.1 to 1999mG, with four display measurement ranges available: starting from 0.01μT, 0.1μT, 0.1mG, or 1mG. ● It is equipped with a data hold function and a measurement unit switching function, allowing for easy operation and measurement.
The M2700A-25MT is an air quality meter used to measure PM2.5 concentration.
The PM2.5 concentration displays different emoticons on the screen for the user to visualize environmental conditions.
Combined gas detector for preventing hypoxia and hydrogen sulfide poisoning / Model number MB34MP-2CPG23K
Downward sensor less affected by water droplets and dust. Compact and lightweight, can be attached to the waist or pocket. JIS T 8201:2010 compliant oxygen meter for oxygen deficiency measurement.
Combustion exhaust gas oxygen concentration measuring device / Model number MB34EH-X711K
Measuring the oxygen concentration in combustion exhaust gases is essential for energy conservation in boilers, incinerators, gas engines, etc. Combustion management through measuring the oxygen concentration in combustion exhaust gases is necessary to prevent air pollution. Measuring the oxygen concentration in exhaust gases.
The MF2PH-SK292DH pH meter is a waterproof portable pH/°C meter equipped with a pH electrode suitable for measuring skin and scalp.
The measurement can be performed by pressing the flat electrode with a flat tip against the skin or scalp. It is used in cosmetics manufacturers, hospitals, and clinics. ■ The main changes from the manufacturer's conventional model are as follows: ● The condition of the pH electrode after calibration can now be displayed on the screen. ● The standard liquid values used for calibration can now be displayed on the screen. ● It is now possible to check the pH electrode with pH-mV display. ● IP67 waterproofing. The main unit has become even more robust than the conventional model. ● The electrode connection is a quick DIN type, making it easy to connect to the main unit. The connection part is also waterproof.
Durable titanium body pH electrode compatible up to 80℃
The MF2PH-PB242DH is a waterproof portable pH/°C meter equipped with a durable titanium body pH electrode designed for plating baths, while the MF2PH-BL252DH is designed for boilers and cooling towers.
The MF2PH-DW2103DH is a waterproof portable pH/°C meter equipped with a pH electrode for low conductivity water (with few impurities/ions).
In pH measurements of low conductivity water, issues such as "measurement values are difficult to stabilize" and "reaction speed is slow" can arise, but this device resolves those problems with a special pH electrode, allowing for highly reliable measurements. For pH measurements of pure water, drinking water, mineral water, etc.
PM2.5-PM10-TVCO-HCHO Measuring Device / Model Number MI1T-10791PM
The MI1T-10791PM is a multifunctional device designed to simultaneously measure particulate matter PM2.5, PM10, TVOC (total volatile organic compounds), HCHO (formaldehyde), temperature, and humidity. The sensor for detecting particulate matter employs a laser light scattering method, allowing for accurate and sensitive detection of PM2.5 and PM10. Data for PM2.5 and PM10 can be stored with timestamps, allowing for the saving of up to 5,000 data points, which can be read as needed.
It is a new measuring device that can simultaneously measure the concentration of formaldehyde (HCHO) and total volatile organic compounds (TVOC).
Professional sensor technology recognizes gases within seconds and displays their concentrations digitally. The meter is very easy to operate, allowing anyone to use it at home or in the office, as well as in production factories, hotels, and schools.
By using the M2468F-441 series, it is easy to determine the timing for oil changes.
High concentrations of old cooking oil and frying oil can quickly accumulate harmful substances such as acrylamide, which may further infiltrate fried foods. At the same time, the food loses its flavor and crispness. By using the cooking oil and frying oil measurement device M2468F-441 series, it becomes easy to determine the timing for oil replacement. The use of fresh oil contributes to consistently maintaining high food quality.
Dustproof and waterproof type, minimum display 0.05°, battery level warning, with bubble tube.
■Much easier to see with LED LCD The digital display section has been upgraded to an LCD, making it easy to read even in the dark. ■Zero setting capability You can set any angle to zero. (Comparison display mode) ■Splash and dust resistant, equivalent to IP54 With an IP54 rating, it can be used safely on site. ■Inverted LCD display When the main unit is turned upside down, the numbers on the digital display also invert. ■Magnet with V-groove The measuring surface is V-cut, providing stability even on pipes. (With magnet)
The thickness measurement of thick materials is resolved with this. Continuous measurement is possible while sliding with a roller-type holder. Continuous sliding measurement.
● Thickness measurement can be easily performed just by sandwiching the object to be measured. The upper and lower holding rollers firmly hold the object, minimizing tilt and variations in measurements caused by the operator, allowing for stable measurements. ● Continuous slide measurement can be performed while keeping the measuring probe in contact with the object using the holding rollers. It is possible to measure various plate-like and sheet-like objects (within 5mm).
It is a measuring device that can quantify gloss, which appears ambiguous to the human eye.
● It is a measuring instrument that can quantify gloss, which appears ambiguous to the human eye. ● Unbeatable low price that allows no competition. It features a switchable function for gloss measurement at 20/60°.
Compact Digital Water Quality Meter (Nitrate Nitrogen) Model Number MD12DR3-HC6004T
Water quality meter for single parameter measurement Easy-to-read screen and simple design Inherits reliability while featuring data transfer capabilities and connection to Claros*. It reduces the hassle of data collection, completely eliminates transcription errors, and enhances compliance traceability. Please note that reagents are not included in the kit and must be purchased separately.
Compact digital water quality meter body (monochloramine/free ammonia) Model number MD12DR3-HC6015T
Water quality meter for single parameter measurement Easy-to-read screen and simple design While inheriting reliability, it is equipped with data transfer functionality and connection capability to Claros*. It reduces the hassle of data collection, completely eliminates transcription errors, and enhances compliance traceability. Please note that reagents are not included in the kit and must be purchased separately.
●Measurement in the UVA range ●The sensor is an easy-to-use separate type ●Large LCD for easy viewing
● Long-wavelength 365nm ultraviolet measurement ● Separate-type UV sensor probe ● Wide measurement range: 199.9μW/cm², 1.999mW/cm², and 19.99mW/cm²
●Data management on PC with included SD card ●Measures ultraviolet intensity in the UVC range ●Temperature measurement possible (sensor sold separately)
● Measurement of short-wavelength 254nm ultraviolet irradiation ● Range of 2mW/cm2 to 20mW/cm2 ● Dedicated UVC sensor structure with a metal housing case.
Environmental sensor
Environmental sensor
● Measures wind speed, temperature, humidity, illuminance, and K-type thermocouple temperature (sensor sold separately) ● Each sensor is standard equipment.
■Features ●Wind speed: 0.4 to 25.0 m/s ●Temperature: 0 to +50℃ ●Humidity: 5 to 95% RH ●Illuminance: 0 to 20,000 Lux ●K-type thermocouple sensor (sold separately): -50℃ to +1300℃
● Measures wind speed, temperature, humidity, illuminance, and K-type thermocouple temperature (sensor sold separately) ● Easy-to-measure separate type
● Measures wind speed, temperature, humidity, illuminance, and K-type thermocouple temperature (sensor sold separately) ● Easy-to-use separate type ● Data management available with optional software
The MI1K-143ZM is a low-concentration ozone meter that measures ozone gas concentrations up to 1 ppm.
The MI1K-143ZM is a low-concentration ozone meter that measures ozone gas concentrations up to 1 ppm. It has a built-in suction pump, allowing for ozone concentration measurements in narrow spaces by connecting a hose to the nozzle. Additionally, it features an alarm function that emits an electronic sound at two specified ozone gas concentration levels, a zero calibration function, and a backlight display function that allows measurements to be seen in dark environments.
Simultaneously measures color and haze, capable of measuring four types: spectral transmittance, color value, haze, and petroleum product color with one device.
Simultaneously measures color and haze, capable of measuring four types: spectral transmittance, color value, haze, and petroleum product color with one device. Tasks that previously required multiple instruments can now be measured with a single device. Ideal for evaluating liquid petroleum product color, drinking water, cosmetics, and more.
A contact angle meter is a system that quantitatively evaluates the sample surface by dropping a water droplet onto the sample surface and measuring the contact angle of the water.
A contact angle meter is a system that quantitatively evaluates the surface of a sample by dropping a water droplet onto the sample surface and measuring the contact angle of the water. Automatic contact angle measurement quantitatively assesses molecular-level cleanliness, wettability, and uniformity. At the same time, it also improves variability issues caused by operators. It can output CSV files for Excel and save droplet images as PNG files. The Windows PC itself is not included.
