We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Inspection Equipment.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Inspection Equipment Product List and Ranking from 960 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

Inspection Equipment Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. null/null
  2. 日本レーザー Tokyo//Electronic Components and Semiconductors
  3. タイムワールド Tokyo//others
  4. 4 アイテックスズヨ Tokyo//others
  5. 5 ニデックアドバンステクノロジー 本社、東京営業所、名古屋営業所 Kyoto//Industrial Machinery
Go to Company Ranking

Inspection Equipment Product ranking

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. Pellet and Powder Foreign Matter Inspection Device - High-Speed Evaluation of Particle Size, Color, and Shape 日本レーザー
  2. Pressure-type seal inspection machine アイテックスズヨ
  3. 気密検査装置（リークテスト装置） UHTテクノロジー
  4. 4 DORNIER RepRap Loom
  5. 5 画像処理システム『N-VisionSystem』＜事例集進呈＞ 野村ユニソン

Inspection Equipment Product List

361～390 item / All 2913 items

Displayed results
Case Study of Automated Visual Inspection: Gear (Appearance and Dimension) Inspection Example

Case Study of Automated Visual Inspection: Gear (Appearance and Dimension) Inspection Example

Introduction of an inspection automation case using a rotating jig, 3D sensors, and cameras to inspect the appearance and dimensions of gears.

Regarding the inspection of defects such as chipped teeth and burrs on gears, as well as dimensional measurements like tooth width, would you consider switching from "visual inspection" to "automated inspection using 3D sensors and cameras"? We would like to introduce a case study of an inspection device that sets the gear on a rotating fixture and conducts inspection and measurement using 3D sensors and cameras while it rotates. By rotating the gear on the fixture and using 3D sensors and cameras to check the condition of the sides, it becomes possible to perform both tooth condition inspection and dimensional inspection simultaneously. 【Features of this system】 - Realization of an inspection device that can check the entire gear using a rotating fixture. - Compatible with various types of gears, including spur gears and helical gears. - The device can be modified based on the inspection requirements. *First, we will verify whether the workpiece you wish to inspect can be inspected. *Detailed processing information, including details and processing flow, is provided in the PDF.

  • Image Processing Software
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case Study of Automated Visual Inspection: Example of Log Periphery Inspection Using 3D Sensors

Case Study of Automated Visual Inspection: Example of Log Periphery Inspection Using 3D Sensors

An example of automated visual inspection using a 3D sensor to measure the outer conditions such as the thickness and surface state of logs during transportation!

Regarding the inspection of the outer conditions such as the thickness and surface condition of logs during transportation, would you consider switching from "manual measurement" to "automatic measurement using 3D sensors"? By installing 3D sensors around the logs on the transportation line and scanning the surface, we can create a system that automatically measures thickness and surface conditions without the need for separate measuring devices. For large materials such as logs that are cumbersome to handle, measuring on the transportation line can also reduce the workload for subsequent tasks. 【Features of this system】 ■ Measurement can be performed on the transportation line without the need for separate inspection devices. ■ By attaching sensors to the transportation line, the measurement process can be streamlined. ■ The use of 3D sensors enables the realization of inspection devices that can measure the size and depth of defects. ■ The device can be modified based on the inspection requirements. *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are provided in the PDF.

  • Image analysis software
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Crystal Defect Inspection Device "EnVision"

Crystal Defect Inspection Device "EnVision"

Non-destructive/non-contact! Detection and monitoring of expansion defects inside wafers at the nm scale is possible.

"En-Vison" is a crystal defect inspection device that can non-contact and non-destructively measure and evaluate crystal defects within wafers, such as dislocation defects, oxygen precipitates, and stacking faults. It provides a high dynamic range for both defect size (15nm to sub-micron) and density (E6 to E10/cm3). By significantly improving detection sensitivity in the depth direction of the wafer and covering a wide range of densities and applications, it greatly enhances the detection sensitivity of stress-induced dislocation defects in the depth direction, which cannot be confirmed near the surface, compared to conventional methods. 【Features】 ■ Non-destructive / Non-contact ■ Visualizes defects that cannot be confirmed by conventional inspection devices ■ Target area: Active device area (near the surface) ■ Detection in raw silicon and at the depth of active devices ■ No specialized knowledge required *For more details, please refer to the related link page or feel free to contact us.

  • Semiconductor inspection/test equipment
  • Other inspection equipment and devices
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Introduction of JTAG Testing in the Inspection Process of Circuit Board Assembly

[Case Study] Introduction of JTAG Testing in the Inspection Process of Circuit Board Assembly

Reduce untested areas in JTAG testing and provide "peace of mind" to our customers!

We would like to introduce a customer who has implemented "JTAG boundary scan testing" in the inspection process of substrate mounting. In response to the increasing demand for BGA mounting, Azbil Taisin has introduced X-ray inspection equipment; however, there were still cases of undetectable issues such as open defects, leading to significant challenges like defect leakage. By implementing JTAG testing, we have successfully reduced the uninspected areas in BGA mounting. [Case Study] ■ Azbil Taisin Co., Ltd. (Northern Nagano Prefecture) - A production base for measurement and control in factories and plants ■ Challenge: Increased uninspected areas in BGA mounting leading to defect leakage *For more details, please refer to the catalog or feel free to contact us.

  • Testing Equipment and Devices
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface inspection device "IMAGE2000.PCWII"

Surface inspection device "IMAGE2000.PCWII"

A surface inspection device with enhanced high-resolution capabilities for wide sheets and improved adaptability to multiple optical conditions!

The comprehensive inspection device IMAGE2000 has achieved simplification and cost reduction of all functions through the computer network. Inspection signal processing + defect image processing + defect image filing + defect map report function are all integrated into one FA computer! The number of connectable cameras was limited to four with the old PCW, but with PCWII, it can now connect up to six cameras. This has improved the high resolution of wide sheets and the ability to accommodate multiple optical conditions. The speed of defect image acquisition has significantly improved, greatly enhancing the capture of discrete defect images. *For more details, please download the catalog.

  • Image Processing Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin pellet foreign matter inspection device IMAGE7000.PE

Resin pellet foreign matter inspection device IMAGE7000.PE

Resin Pellet Foreign Matter Inspection Device IMAGE7000.PE

Inspection device for high-speed and high-precision detection and removal of foreign substances mixed into resin pellets ■□■Features■□■ ■ Newly developed high-speed image processing technology and vibration conveying technology for powder and granular foreign substance inspection, combined with alignment conveying technology, resulting in a high-speed and high-precision foreign substance inspection device for resin pellets. ■ Inspection of surface foreign substances and internal mixed foreign substances can be performed simultaneously using unique lighting and image processing technology. ■ Capable of inspecting transparent pellets. ■ With a unique alignment conveying method, it can inspect over 3 million pieces per hour in PEW type. ■ Easy operation with a Windows operator dialogue system and a variety registration function for 60 items. ■ For more details, please download the catalog or contact us.

  • Image Processing Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pinhole Inspection Device APIS-4000F (B)

Pinhole Inspection Device APIS-4000F (B)

Not only aluminum, but also compatible with pinhole inspections for steel, copper, rubber, and more!

This is an introduction to the pinhole inspection device APIS-4000F (B) handled by Asahi Seiki Co., Ltd.

  • Image Processing Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder and Granule Foreign Matter Inspection Device (Medical Model) IMAGE7000.PG

Powder and Granule Foreign Matter Inspection Device (Medical Model) IMAGE7000.PG

A foreign matter inspection device that enables tool-free disassembly and assembly, as well as a washable device structure!

This is an inspection device that detects and removes foreign substances mixed in powder or granular agents with high speed and precision. It is designed for practical operations such as acceptance inspections of pharmaceuticals, food additives, cosmetics, etc., featuring tool-free disassembly and assembly at points of contact with the agents, as well as a washable device structure. It is suitable for powder or granular agents that are white or light-colored (experimentation is required for colors other than white). ■ Two models can be selected based on processing capacity. You can choose between two models based on processing capacity: - PG2: 15 kg/h to 50 kg/h or - PG4: 30 kg/h to 100 kg/h A dedicated experimental device is available. We have a permanent setup for sample testing. *Customers wishing to conduct sample tests are welcome to contact us freely.

  • Other inspection equipment and devices
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface Inspection Device "IMAGE8000.DHV"

Surface Inspection Device "IMAGE8000.DHV"

Surface inspection device equipped with a high-speed CCD camera with a video rate of 80/160 MHz (1:1 processing support)!

The surface inspection device "IMAGE8000.DHV" is a system equipped with a high-speed CCD camera operating at 80/160MHz (1:1). It uses a fiber optic camera link extender method, allowing connection between the detector (four cameras) and signal processing with a single fiber optic cable (with a maximum cable length of 200m). 【Features】 ■ Camera Link Extender The fiber optic camera link image transfer unit can transmit images from four Base Configuration cameras using a single fiber optic cable. ■ Digital High-Function Calculation ■ Camera signal extension up to 200m ■ Defect Evaluation Parameters ■ Real-Time Display Function ■ Variety Registration ■ Calibration Mode *For more details, please download the catalog or contact us.

  • Image Processing Equipment
  • Other surface treatment equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface Inspection Device "IMAGE8000.DHV"

Surface Inspection Device "IMAGE8000.DHV"

A surface inspection device with enhanced high-resolution capabilities for wide sheets and improved adaptability to multiple optical conditions!

The IMAGE8000.DHV is a high-speed CCD camera system equipped with an 80/160MHz (1:1) camera. It uses a fiber optic camera link extender method, allowing a single fiber optic cable to connect the detector (four cameras) to the signal processing unit. (The maximum length of the fiber optic cable can be up to 200m.) 【Features】 ○ Surface inspection device for plain sheet-shaped products ○ Up to 12 cameras can be connected to one signal processing unit. ○ Connected cameras can be grouped into multiple configurations (front/back or transmission/reflection, etc.) depending on the equipment configuration and installation conditions. ○ The connection distance between the cameras and the signal processing unit can be extended up to 200m. ○ High-speed/high-resolution digital cameras can be used. ○ The use of high-speed cameras improves the resolution in the flow direction, enabling more precise defect detection. ○ Equipped with gradation comparison processing, point, area, line, and three-line parallel pipeline arithmetic processing, and two-dimensional digital computation functions. ○ Up to six evaluation parameters can be set per camera. ○ Custom specifications, such as marking devices (label markers/pen markers) and slit compatibility, can also be customized. *Please consult us.

  • Image Processing Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Turret rewinder

Turret rewinder

Supports various core sizes with the exchange of the original roll axis! Efficiently rewinds large original rolls into smaller ones.

We would like to introduce the "Turret Rewinder" handled by Soltech Industrial Co., Ltd. This product enhances work efficiency with its dual-axis turret system. It accommodates various core sizes through the exchange of the raw material shaft. Our lineup includes the "ST-350," which can also be used as a rewind slitter, as well as the "W-1050," which can handle paper tube lengths of up to 1050mm, and the "W-450," among others. 【Features】 ■ Dual-axis turret system ■ Accommodates various core sizes through the exchange of the raw material shaft ■ Compatible with printed materials ■ Edge control through line sensors *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine tools
  • Winding Machine
  • Other processing machines
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Measuring Instruments, Testing Equipment, Inspection Devices Comprehensive Catalog

Measuring Instruments, Testing Equipment, Inspection Devices Comprehensive Catalog

A comprehensive product catalog from Sankou Electronic Research Institute that strongly supports high-quality measurement, inspection, and quality control operations, including electromagnetic and eddy current thickness gauges!

This is a comprehensive catalog of high-precision and highly reliable measuring instruments, testing equipment, and inspection devices handled by Sanko Electronic Research Institute. We provide robust support for high-quality measurement, inspection, and quality control operations based on our extensive experience and know-how. 【Contents】 - Electromagnetic / Eddy current thickness gauges - Electromagnetic thickness gauges - Eddy current thickness gauges - Related thickness gauges, measuring instruments, and inspection devices - Pinhole detectors - Metal detector / needle detector - Construction and renovation related equipment - Moisture meters - Related measuring instruments, testing equipment, and inspection devices *If you would like a catalog, please contact us through the request for materials. *You can view detailed contents from the download section.

  • Testing Equipment and Devices
  • Image Processing Equipment
  • Other measurement, recording and measuring instruments
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Robot Automation Case: Scratch Inspection Device

Robot Automation Case: Scratch Inspection Device

To optimize business efficiency, we propose the introduction of suitable robots! Introducing a damage inspection device.

We would like to introduce a case study on the design of Aitec Co., Ltd.'s "Scratch Inspection Device." To optimize our customers' operational efficiency, we conduct a thorough analysis of their business and propose suitable robot implementations tailored to each customer. We achieve automation, labor-saving, and unmanned operations based on the results of our customers' businesses, so please feel free to consult us for any requests. 【Case Overview】 ■ Device Name: Scratch Inspection Device ■ Field: Semiconductors ■ Workpiece: Hard Disk ■ Process: Scratch Inspection ■ Specifications: Scratch inspection of hard disks *For more details, please refer to the PDF materials or feel free to contact us.

  • Inspection robot
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Robot Automation Case: Proportional Valve Performance Testing Machine

Robot Automation Case: Proportional Valve Performance Testing Machine

Inspection device for hydraulic solenoid valves! Flow oil, open and close the solenoid valve, and inspect the pressure and flow rate at that time.

We would like to introduce a case study on the design of the "Proportional Valve Performance Testing Machine" by Aitec Co., Ltd. To optimize our customers' operational efficiency, we conduct an analysis of their operations and propose suitable robot implementations tailored to each customer. We achieve automation, labor-saving, and unmanned operations based on the results of our customers' operations, so please feel free to consult us with any requests. 【Case Overview】 ■ Device Name: Proportional Valve Performance Testing Machine ■ Field: Automotive ■ Workpiece: Hydraulic Solenoid Valve ■ Process: Inspection ■ Specifications: Flow oil through the hydraulic solenoid valve, open and close the solenoid valve, and inspect the pressure and flow rate at that time. *For more details, please refer to the PDF document or feel free to contact us.

  • Inspection robot
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Isolation transport capsule for stretcher use

Isolation transport capsule for stretcher use

Protecting emergency responders and medical personnel during emergency transport from COVID-19.

Features: - The air inside the capsule is exhausted through an antiviral HEPA filter, and the collected viruses are inactivated. - Attaching the exhaust unit's duct to the expanded capsule creates a simple negative pressure environment. - It can operate with a mobile battery. - Since no metal parts are used throughout the capsule, it can be completely incinerated after use. Assembly method in four simple steps: 1. Unpack and unfold. 2. Fully open the zipper. 3. Raise the wire and secure it with a clip. 4. Connect the unit's hose to the capsule.

  • Other clean room equipment and facilities
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface Inspection Device Sherlock-300F/FH <Desktop Type>

Surface Inspection Device Sherlock-300F/FH <Desktop Type>

Introducing the Sherlock-300F/FH <desktop type> substrate appearance inspection device.

Rexam Co., Ltd. has been engaged in the development, design, and manufacturing of electronic circuit boards for over 40 years. Throughout this history, we have advanced the development of circuit board appearance inspection devices by consolidating the functions required for these devices, which can only be seen from the perspective of a circuit board manufacturer, while incorporating the technology of optical devices with proven results in medical ophthalmic equipment. Circuit Board Appearance Inspection Device Sherlock-300F/FH <Desktop Type> 【Features】 ◇ No need to open and close; automatic inspection ◇ 21.5-inch touch panel screen eliminates the need for a keyboard! ◇ Convenient teaching support tool reduces data creation time The catalog includes all products in the Sherlock-300 series, allowing you to choose according to your application. Please view the catalog download and feel free to contact us.

  • Other inspection equipment and devices
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Substrate Appearance Inspection Device Sherlock-300I/IH

Substrate Appearance Inspection Device Sherlock-300I/IH

Perfect for narrow spaces! Introducing the inline type Sherlock-300I/IH.

REXAM Corporation has been engaged in the development, design, and manufacturing of electronic circuit boards for over 40 years. Throughout this history, we have advanced the development of circuit board inspection equipment required in the circuit board manufacturing field. ―――― Circuit Board Inspection Equipment Sherlock-300I/IH <Inline Type> ―――― 【Features】 ◇ Ideal for inspecting boards before reflow ・ High-rigidity camera movement mechanism ・ Boards are fixed to the stage ・ Motion control technology adopted for low vibration high-speed drive ◇ No keyboard needed with a 21.5-inch touch panel screen! ◇ Compact body [width 620mm], allowing for additional placement in existing lines! The catalog includes the entire Sherlock-300 series, starting with the Sherlock-300I, allowing you to choose according to your application. ▼ Please view it from the catalog download and feel free to contact us. ▼ ――――――――――――――――――――――――――――――――――

  • Other inspection equipment and devices
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Substrate Appearance Inspection Device "Sherlock-3D-1100S"

Substrate Appearance Inspection Device "Sherlock-3D-1100S"

Why is it defective in 3D measurement? It's obvious at a glance. [Inspection speed 5,000 mm/second]

Inspection Device for External Appearance: Hi-SPECKER Sherlock-3D-1100S <3D-AOI> 【Features】 　◇ 3D Measurement using Laser Scanning 　　1. 3D measurement through optical sectioning 　　2. Optical unit enabling high-speed inspection 　　　= Industry-leading inspection speed of 2,700 mm²/second = 　◇ High Inspection Capability using 3D Shapes 　　1. Transition from "alternative" inspection to "direct" inspection 　　2. "Multi-scan" achieving high precision from "large to small" 　　　= Industry-leading measurement range <maximum height of 20 mm> = 　◇ User-friendly Interface for Operators 　　1. Visual judgment system allowing observation from various angles 　　2. Easy confirmation of abnormalities at a glance with the "Inspection Result List" 　◇ "Easy" Teaching to Enhance Work Efficiency 　　1. Pre-installed library 　　2. Inspection commands specialized for target components Please download the catalog for more details and feel free to contact us. ――――――――――――――――――――――――――――――――――――― 　　　↓　↓　↓　　　　　　　　　　　　　　　　　　　　　↓　↓　↓

  • Other inspection equipment and devices
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Substrate Appearance Inspection Device "Sherlock-500L"

Substrate Appearance Inspection Device "Sherlock-500L"

Size L, parts with a maximum height of 45mm are also acceptable! 【Inspection speed 7,500mm²/second】

Inspection Device for Substrate Appearance Hi-SPECKER Sherlock-500L <AOI> 【Features】 　◇ Capable of inspecting from ultra-small parts to large components! 　　1. L size, parts up to a maximum height of 45mm are acceptable 　　2. High depth of field allows for tall components 　　3. High-rigidity camera with 2-axis drive is suitable even before reflow 　　4. Highest resolution of 10μm makes it suitable for small parts 　◇ Top-class inspection speed can accommodate high-speed lines 　　1. Achieves ultra-fast inspection of over 7,500mm² per second 　　2. High-speed drive components × high-speed imaging camera × high-precision large-diameter lens 　　　 All of these are optimally and specially designed! Balancing performance and cost 　◇ Smart operation, easy to use! 　　1. Simple! Intuitive touch operation 　　2. Equipped with a convenient teaching support tool 　　Please download the catalog for more details and feel free to contact us. 　――――――――――――――――――――――――――――――――――――― 　　　↓　↓　↓　　　　　　　　　　　　　　　　　　　　　↓　↓　↓

  • Other inspection equipment and devices
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Solder Printing Inspection Device 'Sherlock-SP-700'

Solder Printing Inspection Device 'Sherlock-SP-700'

Specialized in solder printing inspection! On-site inspection, analysis, and correction are possible with an easy teaching function included.

The "Sherlock-SP-700" is a solder printing inspection device that does not require optional software. It comes standard with data analysis functions necessary for setting conditions for printing machines. It also features an easy teaching function, allowing inspection data to be created in just 5 minutes. Additionally, it enables high-precision 3D measurement using dual line lasers. 【Features】 ■ Dual line laser ■ Easy teaching function ■ Standard data analysis function ■ No optional software required *For more details, please refer to the PDF document or feel free to contact us.

  • Circuit Board Inspection Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clean inspection machine

Clean inspection machine

Further localized cleaning in the inspection room! We also have various options available.

We would like to introduce our "Clean Inspection Machine," which allows for the management of cleanliness within the booth. By using an ionizer for static electricity removal, we prevent dust adhesion. You can choose from two types of ionizers. Additionally, the air shaft is equipped with our "SK-1MNP-NN" as standard, eliminating metal friction to prevent the adhesion of metal foreign objects. 【Features】 ■ Prevention of metal dust generation with the air shaft ■ Prevention of dust adhesion due to static electricity ■ Management of cleanliness within the booth ■ Ability to check particle conditions within the booth using a particle sensor ■ The air shaft comes standard with our "SK-1MNP-NN" (custom options are also available) *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Other inspection equipment and devices
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D substrate appearance inspection machine 'RV-2-3D'

3D substrate appearance inspection machine 'RV-2-3D'

Solving various issues in inspection and measurement processes! Introducing the next-generation 3D-AOI inspection machine.

The "RV-2-3D" is a 3D substrate appearance inspection machine that achieves higher precision and speed. In addition to the conventional 2D templates and process modes, a new template for 3D has been added. Furthermore, a dedicated algorithm for fillet inspection has been developed. It supports various inspection items such as dimensional measurement (length, distance, clearance), angle, flatness, and parallelism all in one machine. 【Features】 ■ High-speed inspection - Achieves high speed with a new 3D unit - Achieved 0.41 sec/FOV, a 34% improvement compared to conventional machines ■ High precision - Height resolution of 0.1μm and repeatability of 10μm (for 0402 chips) - Significant improvement in accuracy - New technology development enables the acquisition of clear and high-precision 3D images ■ Inspection method - In addition to the conventional 2D templates and process modes, a new template for 3D has been added - Additionally, a dedicated algorithm for fillet inspection has been developed *For more details, please refer to the PDF document or feel free to contact us.

  • Circuit Board Inspection Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D substrate appearance inspection machine 'RV-2-3DH'

3D substrate appearance inspection machine 'RV-2-3DH'

A single device supports various inspection items! We introduce inspection machines suitable for inspection and measurement in diverse industries such as automotive and medical.

The "RV-2-3DH" is a 3D substrate appearance inspection machine with overwhelming speed and astonishing high precision. It automates various inspection processes that were previously done manually, including dimensional measurement, flatness inspection, scratches, and dents. By implementing inline processes, it achieves stabilization of quality and reduction of inspection time, making the inspection and measurement processes smarter. The adoption of high-resolution lenses improves the inspection accuracy of ultra-small components. It features a user-friendly process mode that is easy to use for beginners and advanced users alike. 【Features】 ■ Overwhelming speed: Achieves significant improvement in inspection tact with high pixel (12 million pixels) support. ■ Astonishing high precision: Inspection accuracy of ultra-small components is enhanced with high-resolution lenses. ■ Automation of visual inspection: Can also be used for measurement purposes. ■ Efficiency improvement for the entire factory: Realizes efficiency improvement for the entire factory through system integration. ■ Well-established ease of use: A process mode that is easy to use and customizable for both beginners and advanced users. *For more details, please refer to the PDF document or feel free to contact us.

  • Circuit Board Inspection Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chain Inspection Machine TM1000

Chain Inspection Machine TM1000

For those who want to perform simultaneous inspection from both sides, such as coaxial measurement! Measure the positional coordinates of chain pins from the top and bottom surfaces!

The "Chain Inspection Machine TM1000" is a specialized inspection machine provided by JUKI, designed for simultaneous inspection of both sides, such as coaxial measurement. It has numerous achievements in automotive components (timing chains / drive chains)! ■ Features - Dedicated measurement inspection machine for chains - Used for quality inspection of completed timing chains - Automatic inspection of one full loop of the chain significantly reduces inspection time - By measuring the perpendicularity of chain pins, potential failure factors can be detected and eliminated early - Statistical management of inspection data enables feedback to the manufacturing process and predictive maintenance * For more details, please download the PDF or contact us.

  • Visual Inspection Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inspection and Measurement System Case Studies (Achieving Automation of the Inspection Process)

Inspection and Measurement System Case Studies (Achieving Automation of the Inspection Process)

The introduction of a hybrid inspection machine using a high-speed camera and high-precision laser has significantly reduced inspection time and enabled quantitative inspection of defects!

We would like to introduce a case study on JUKI's automation implementation. The inspection measurement system "SE1000" contributes to a significant reduction in inspection time and the realization of quantitative inspection of defects by performing: 1. A full scan with a high-speed 2D camera through hybrid inspection 2. Pinpoint inspection (depth) with a laser. 【Effects】 ■ Full inspection becomes possible, enhancing traceability through inspection data and images. ■ Statistical analysis can be conducted from data through the digitization and quantification of inspection content and records, enabling process management. ■ Defects are discovered in real-time, allowing for rapid feedback upstream and minimizing defects. *For more details, please refer to the PDF materials or feel free to contact us.

  • Visual Inspection Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case studies of inspection machines, implementation machines, and measurement machines.

Case studies of inspection machines, implementation machines, and measurement machines.

Utilizing the design and manufacturing know-how cultivated in the implementation and sewing business! We propose optimal solutions.

We will introduce case studies of inspection machines, mounting machines, and measurement machines handled by JUKI Corporation. In one case, due to challenges such as a shortage of inspection personnel and managers for visual inspections, the "SE1000" was introduced. This led to a significant reduction in man-hours through automatic inspection and a decrease in management man-hours through automatic aggregation from handwritten records. Additionally, there are cases where inspection time was dramatically reduced from 120 minutes to 3 minutes, and from 5,400 seconds to 40 seconds. Our company utilizes the design and manufacturing know-how cultivated in the mounting and sewing business to propose solutions suitable for your site. [Case Overview (Partial)] <CASE1> ■Challenge: Shortage of inspection personnel and managers ■Solution: Significant reduction in man-hours through automatic inspection <CASE2> ■Challenge: Accelerating inspection takt and stabilizing quality ■Solution: Achieving quality stabilization by improving the repeat stability of inspections *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inspection and Measurement System Case Study (Speeding Up Inspection Tact)

Inspection and Measurement System Case Study (Speeding Up Inspection Tact)

24-hour, 365-day line operation is possible! Here are examples of established traceability.

We would like to introduce a case study of the inspection machine implemented by JUKI Corporation. Our customers have expressed concerns such as "the manual visual inspection requires significant labor from multiple inspectors" and "there is variability in the results of visual inspections." After the introduction of the inspection machine, we have received feedback that it has enabled labor reduction and improved inspection quality by eliminating visual inspections. 【Case Overview】 ■ Customer Concerns - Manual visual inspection requires significant labor from multiple inspectors - There is variability in the results of visual inspections - Recording and transcribing inspection results takes time - For critical safety components that require strict inspection quality, inspection time and labor are particularly burdensome *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of Feedback System Solution] Reduction of Printing Misalignment

[Case Study of Feedback System Solution] Reduction of Printing Misalignment

Detecting misalignment in printing machines! A case where preventive measures can be taken to avoid issues.

We would like to introduce a case where a feedback system solution was able to reduce printing misalignment. The customer's concerns included issues such as "defects after reflow do not settle" and "when printing or mounting defects occur, information is not communicated between machines, leading to delays in countermeasures." After implementation, we received feedback stating, "Thanks to the inspection machine (AOI) feedback function, we were able to minimize the production of defective boards." [Case Overview] ■ Results - By communicating the printing misalignment results from the inspection machine (SPI) to the printing machine, we were able to correct the misalignment and reduce printing misalignment from the next boards. - We can sense the amount of misalignment in the printing machine and take preventive measures in advance. *For more details, please refer to the PDF document or feel free to contact us.

  • Printing Machinery
  • Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Inspection Equipment

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.