Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
1021～1050 item / All 3794 items
You can measure the moisture content of copy paper and cardboard base paper.
You can measure the moisture content of copy paper and cardboard base paper. Additionally, the HK-300 series offers three models depending on the measurement target and application: HK-300-1 with grip sensor, HK-300-2 with conductive rubber sensor, and HK-300-3 with constant pressure sensor.
Moisture measurement can be performed on kraft paper, liner paper, and copy paper.
Moisture measurement can be performed on kraft paper, liner paper, and copy paper. Additionally, the HK-300 series offers three models based on the measurement target and application: - HK-300-1 with grip sensor, - HK-300-2 with conductive rubber sensor, - HK-300-3 with constant pressure sensor.
The Yamamoto-type soil hardness meter is an instrument that measures soil hardness, which is one of the physical properties of soil.
When a cone is pressed vertically into a flat-cut cross-section, both the depth of cone penetration and the corresponding soil reaction force (spring compression) are measured simultaneously as variables, from which the theoretical hardness value (kg/cm²) is calculated. Due to this unique principle, a wide range of hardness from soft soils to soft rocks can be accurately measured in a matter of seconds. Additionally, it can be universally applied to general soft materials other than soil.
By adopting a notch filter, noise is reduced. This device detects weak leakage sounds and identifies leaks by confirming and comparing them with sound and numerical values.
The sound of water leakage is characterized by various noises and a mixture of complex sounds. Human hearing plays a significant role in this judgment. Consequently, devices have been developed that aim to capture sounds as close as possible to leakage sounds or to assess sounds using meters. The HG-10A incorporates both of these functions. In recent years, water leakage in main drainage pipes has decreased due to pipe renovation projects, achieving a high level of effectiveness. In contrast, minor leaks in water supply pipes and within buildings have increased, making investigation work very challenging. This device detects such weak leakage sounds and identifies leaks by confirming and comparing sounds and numerical values. Sensors and filters have been adjusted to be particularly suitable for detecting leaks in water supply pipes such as VP pipes and polyethylene pipes. It employs an "easy-to-read meter" and a "filter that allows for easy-to-hear sounds," enhancing the detection efficiency of the device.
Low-speed measurement can instantly measure speeds from 8 km/h to 322 km/h. It can be used as a speedometer for low-speed vehicles at construction sites and factories.
A function has been added to reduce noise, such as electromagnetic waves, which can cause malfunctions, allowing for more reliable measurements. It can be used for speed measurement of slow vehicles in environments prone to noise, such as construction sites, factory premises, and game centers.
This is an easy-to-use domestic water leak detection device that combines a newly developed compact high-performance microphone with a higher-end digital amplifier.
It is equipped with a microprocessor that automatically eliminates noise.
This is a dedicated device for measuring light wind speed, a single-function anemometer. Measurement range: wind speed 0.05 to 2.00 m/s (1 range).
Simultaneous analog output is also possible, allowing for a wide range of applications beyond air conditioning. *Please note that this product requires adjustment in combination with the main unit when replacing the sensor (considered a repair). An additional adjustment fee will be required on top of the price for the sensor probe alone.*
It is easy to separate from the display section with certification.
It supports a 3-way power supply: rechargeable battery, AC adapter, and dry batteries (dry batteries are not included). *This device has received type approval.* *Please choose the type according to your needs.* - PB-30 (capacity 15/30kg) - PB-60 (capacity 30/60kg) - PB-150 (capacity 60/150kg)
This is a soot concentration meter that evaluates the smoke density of combustion exhaust gases and checks combustion efficiency.
By drawing in combustion exhaust gases, we compare the smoke and smoke scale adhered to the filter paper to identify the smoke density. It can be used with all oil burners and can accurately measure smoke density within one minute. It is widely accepted as a world standard method for smoke testing of oil burners and has gained trust through years of proven performance in the burner industry.
In addition to measuring the absorbance of nitrogen, phosphorus, etc., pH (electrode type) and turbidity can also be measured.
It is a spectrophotometer that excels in accuracy and reproducibility, and is easy to operate.
It is a data logger multi-water quality measurement device equipped with an SD slot.
You can measure conductivity, TDS, and salinity concentration. By simply transferring the included 1GB SD card to your computer, you can edit the data in Excel. It is user-friendly with data hold function and Max/Min display function. Additionally, it has a backlight, making it convenient for measurements in dark places.
There is a very high correlation between the measurement values according to JIS standards and the wastewater from various business sites.
This measurement method uses the same reaction conditions for pollutants and potassium permanganate as JIS K 0102, and the volumes of the sample and reagents are conducted at one-twentieth of the JIS method. Heating at 100°C for 30 minutes is performed using a reactor instead of a water bath, and the amount of consumed permanganate ions is determined by measuring the decrease in absorbance with a photoLab 6100 water quality meter instead of using titration, displaying the COD concentration. Since the reaction conditions of this method are exactly the same as those of the JIS method, there is a very high correlation between the measurement values obtained by the JIS method and those obtained using the photoLab 6100.
Wind speed, temperature at two points, temperature difference between the two points, and humidity can be measured as the five elements of air conditioning.
The display is a large, bright LED screen.
Clearly read the numbers on the LCD screen with a backlight.
This is a waterproof type, making it ideal for outdoor use. This device is equivalent to IP54 for dust and water resistance, so it can be used with wet hands. It can be safely used in places with a lot of dust on site.
This is a compact and portable electromagnetic wave measuring device (gauss meter).
You can quickly and easily measure the strength of electromagnetic fields generated by electrical devices around you, such as televisions, computer monitors, video equipment, fluorescent lights, and the electromagnetic fields from high-voltage transmission lines and substations.
It is a lightweight, compact, portable electromagnetic wave measuring device (gauss meter).
We can accommodate a wide range of measurements, allowing us to measure the intensity of electromagnetic waves generated by electronic devices such as computer monitors, televisions, video equipment, fluorescent lights, as well as the environmental electromagnetic fields around high-voltage power lines and substations.
This is an electromagnetic wave measuring device that can be used in difficult and narrow spaces for measuring electromagnetic waves.
The intensity of electromagnetic waves generated by electrical appliances such as computer monitors, televisions, video equipment, fluorescent lights, and the environmental electromagnetic fields around high-voltage transmission lines and substations can be easily measured by anyone.
Straight-line distance, horizontal distance, vertical distance, slope angle, height of the target object, and azimuth angle can be measured.
The obtained values can be downloaded to a computer and utilized. (An optional download cable is required.) No reflector is needed, and with the optical lens equipped, all operations can be performed without taking your eyes off the target.
It is a digital walking measure that allows for easy distance measurement while walking.
We offer three types to suit your needs. From left to right, they are DWS-160B/DWS-160C/DWS-160W. Please select one type from the options below based on your application and functionality. - DWS-160B - DWS-160C - DWS-160W (two-wheel type)
The sensor probe is telescopic, making it easy to measure wind speed and temperature at high altitudes.
It comes with maximum and minimum value functions. Diverse display formats: m/s, km/s, mile/h, knots, °C, °F.
Can be measured accurately in mg/L (or g/L) O2 with minimal operation.
The COD measurement set includes the main measuring instrument, COD test tubes (25 pieces, with one set each for low range and medium range), reactor RD125, and vial stand.
It is a density measuring device with a 7-point set (JIS type field measuring instrument).
It is a density measuring device for a 7-point set (JIS type field measurement device). This is a testing method to determine the density of soil in its original position using the sand replacement method. (Limited to a maximum particle size of 53mm or less)
![[Analysis Instrumentation] OEM Product - Trace Moisture Measurement Device](https://image.mono.ipros.com/public/product/image/445/2000146335/IPROS9113280867634892124.png?w=280&h=280)
We uphold a commitment to "quality first" and deliver our products with unwavering confidence and responsibility.
The planning proposals, order acceptance, contract manufacturing, and development and production of OEM products are all fundamentally based on wisdom, passion, and originality. Our company, Nissho Electric Co., Ltd., engages in a wide range of activities including the design, manufacturing, and sales of various equipment, software development, and system design. We have obtained international certifications ISO 9001:2015 and ISO 14001:2015, establishing a globally recognized management system. We operate an effective Integrated Management System (IMS) and implement step-by-step check management through policy documents (design policy documents, manufacturing policy documents, countermeasure policy documents, etc.) from order to delivery, focusing on quality improvement and stabilization, as well as the design and manufacturing of environmentally considerate products, which is a company-wide theme. With foresight to predict market trends, we propose planning for hardware or software, while also responding to various requests for product development by leveraging our advanced technical capabilities. This unwavering spirit is supported by the energy and originality of our staff.
500℃ temperature cycle thin film stress measurement device FLX-2320-S
A measuring device capable of accurately measuring thin film stress non-contact and non-destructively within a temperature range from room temperature to 500°C. 【Features】 ○ Calculates the change in the radius of curvature of the substrate caused by the thin film applied. The radius of curvature is calculated from the reflection angle of a laser scanning across the substrate. By measuring the radius of curvature before and after the film application and calculating the difference, the change in the radius of curvature (R) can be determined. ○ The temperature inside the measurement chamber can be freely set, allowing for a more accurate understanding of thin film characteristics under actual process and IC operating conditions. ○ An option for measuring glass substrates is also available. ● For other functions and details, please contact us.
The highest quality inspection equipment common to all locations, anywhere in Japan or overseas.
At Parts Seiko Co., Ltd., we conduct "Quality Assurance (Quality Control and In-Process Inspection)." Starting from the Quality Assurance Department, we have established a quality assurance system at each factory, enabling direct shipments from the factories. We also inspect and guarantee products manufactured at overseas and partner factories at the Quality Assurance Department and each shipping base factory. Regarding measuring equipment, we have introduced the same inspection measuring instruments both in Japan and overseas (2D measuring machines, 3D measuring machines). By using the same measuring instruments and methods, we ensure there are no measurement discrepancies between Japan and overseas. Furthermore, at our factory in China, we have implemented material analysis equipment to manage the quality of raw materials, striving to maintain quality. 【Equipment Owned (Excerpt)】 ■ Keyence Image Measuring Machine ■ Mitutoyo CNC 3D Measuring Machine (Bridge Type) ■ Mitutoyo 2D Measuring Machine ■ FARO Gage 3D Measuring Machine (Arm Type) ■ RoHS Analysis Equipment (China Factory Only) ■ Material Analysis Equipment (China Factory Only) *For more details, please refer to the related link page or feel free to contact us.
Magnetization characteristic measurement device for magnetic materials using pulse magnetization.
Measurement of high coercivity magnets, which could not be measured with conventional static magnetic fields, has become possible due to pulse magnetization. ■ Capable of generating high magnetic fields : Up to 12T (using special air-core coils) for complete saturation ■ Specifications for magnetic field strength can be selected to match the measuring magnet : Compatible with ferrite magnets to rare earth sintered magnets ■ High-speed measurement ■ High performance: Repeatability accuracy of ±1% or less ■ Custom design and manufacturing according to sample dimensions : Standard sample dimensions φ10 L=7 ■ Basic operation is as easy as the 6700BH ■ Added temperature-variable measurement model to the lineup : Temperature settings possible up to 200℃
A rich selection of Tesla meters, flux meters, and more!
Achieve high-precision measurement and analysis of all magnetic fields and magnetic flux! We offer a diverse lineup of products, including the "Tesla meter" for high-precision measurement of DC, AC, and pulse magnetic field strength, the "Flux meter" equipped with a high-performance digital integrator for stable measurements, and the "Simple calibrator" using permanent magnets with minimal time-dependent changes. 【Product Lineup】 ■ Tesla meter ■ Flux meter ■ Standard magnet ■ BH curve tracer ■ Support unit *For more details, please download the catalog or contact us.
Introducing the flow of measurement and analysis! We have measurement equipment suitable for shape measurement and composition analysis.
At Nakayama Precision, we offer "Measurement and Analysis" services. Are you facing issues such as wanting to know the surface roughness of round objects, needing to take high-magnification photos to observe products, checking for foreign substances on parts, or wanting to investigate the size of foreign substances to review your product management system? We have received many inquiries on various other matters as well. If you have any concerns, please contact our sales department. 【Flow of Measurement and Analysis】 ■Observation: Shape observation, 3D observation ↓ ■Measurement: Spherical measurement, roughness measurement, flatness measurement, depth measurement ↓ ■Analysis: Composition analysis ↓ ■Report *For more details, please refer to the related links or feel free to contact us.
![[Delivery Example] Volume (Gas Quantity) Measurement Unit for LIB Development](https://image.mono.ipros.com/public/product/image/6b9/2000451134/IPROS29519155657148424026.jpeg?w=280&h=280)
Case study of the delivery of a volume (gas quantity) measurement unit for lithium-ion batteries (LIB).
Here is an example of a delivered "Volume (Gas Quantity) Measurement Unit for LIB Development." We received a request from a customer asking, "Could you create an automatic device to measure volume using Archimedes' principle?" Previously, they placed a container filled with water on an electronic scale and suspended the item to be measured with a wire to weigh it. Since the value they wanted to measure was in increments of 0.0001g, they found it difficult to measure due to hand tremors and expressed a desire to automate the process using a cylinder. The position where the electronic scale descends can be adjusted by moving the scale. We made it possible to adjust the height near the cylinder. Additionally, we accommodated their request to integrate the data into a computer, resulting in a device that met the customer's specifications. 【Example】 ■Product ・Volume (Gas Quantity) Measurement Unit for LIB Development ■Requests ・Automate the part where weight was measured by suspending with a wire using a cylinder ・Integrate with a computer *You can view the comprehensive catalog of Eishin via PDF download.
Instantly measure work vibrations with a simple switch operation! This is a measuring device for vibration tool management personnel.
The 『TVHP-001』 is a simple handheld vibration acceleration effective value measuring device that can measure various vibrating tools with frequency correction. With easy switch operation, it instantly measures work vibrations. There are no complicated operating procedures, making it easy to introduce. It features a built-in lithium-ion battery that can be used for long periods when fully charged. It is available at an affordable low price. 【Features】 ■ Instantly measures work vibrations with simple switch operation ■ Easy to introduce due to the absence of complicated operating procedures ■ Built-in lithium-ion battery that can be used for long periods when fully charged ■ Capable of measuring various vibrating tools ■ Achieved at an affordable low price *For more details, please refer to the PDF document or feel free to contact us.
