Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
1051～1080 item / All 3818 items
In addition to measuring the absorbance of nitrogen, phosphorus, etc., pH (electrode type) and turbidity can also be measured.
It is a spectrophotometer that excels in accuracy and reproducibility, and is easy to operate.
It is a data logger multi-water quality measurement device equipped with an SD slot.
You can measure conductivity, TDS, and salinity concentration. By simply transferring the included 1GB SD card to your computer, you can edit the data in Excel. It is user-friendly with data hold function and Max/Min display function. Additionally, it has a backlight, making it convenient for measurements in dark places.
There is a very high correlation between the measurement values according to JIS standards and the wastewater from various business sites.
This measurement method uses the same reaction conditions for pollutants and potassium permanganate as JIS K 0102, and the volumes of the sample and reagents are conducted at one-twentieth of the JIS method. Heating at 100°C for 30 minutes is performed using a reactor instead of a water bath, and the amount of consumed permanganate ions is determined by measuring the decrease in absorbance with a photoLab 6100 water quality meter instead of using titration, displaying the COD concentration. Since the reaction conditions of this method are exactly the same as those of the JIS method, there is a very high correlation between the measurement values obtained by the JIS method and those obtained using the photoLab 6100.
Wind speed, temperature at two points, temperature difference between the two points, and humidity can be measured as the five elements of air conditioning.
The display is a large, bright LED screen.
Clearly read the numbers on the LCD screen with a backlight.
This is a waterproof type, making it ideal for outdoor use. This device is equivalent to IP54 for dust and water resistance, so it can be used with wet hands. It can be safely used in places with a lot of dust on site.
This is a compact and portable electromagnetic wave measuring device (gauss meter).
You can quickly and easily measure the strength of electromagnetic fields generated by electrical devices around you, such as televisions, computer monitors, video equipment, fluorescent lights, and the electromagnetic fields from high-voltage transmission lines and substations.
It is a lightweight, compact, portable electromagnetic wave measuring device (gauss meter).
We can accommodate a wide range of measurements, allowing us to measure the intensity of electromagnetic waves generated by electronic devices such as computer monitors, televisions, video equipment, fluorescent lights, as well as the environmental electromagnetic fields around high-voltage power lines and substations.
This is an electromagnetic wave measuring device that can be used in difficult and narrow spaces for measuring electromagnetic waves.
The intensity of electromagnetic waves generated by electrical appliances such as computer monitors, televisions, video equipment, fluorescent lights, and the environmental electromagnetic fields around high-voltage transmission lines and substations can be easily measured by anyone.
Straight-line distance, horizontal distance, vertical distance, slope angle, height of the target object, and azimuth angle can be measured.
The obtained values can be downloaded to a computer and utilized. (An optional download cable is required.) No reflector is needed, and with the optical lens equipped, all operations can be performed without taking your eyes off the target.
It is a digital walking measure that allows for easy distance measurement while walking.
We offer three types to suit your needs. From left to right, they are DWS-160B/DWS-160C/DWS-160W. Please select one type from the options below based on your application and functionality. - DWS-160B - DWS-160C - DWS-160W (two-wheel type)
The sensor probe is telescopic, making it easy to measure wind speed and temperature at high altitudes.
It comes with maximum and minimum value functions. Diverse display formats: m/s, km/s, mile/h, knots, °C, °F.
Can be measured accurately in mg/L (or g/L) O2 with minimal operation.
The COD measurement set includes the main measuring instrument, COD test tubes (25 pieces, with one set each for low range and medium range), reactor RD125, and vial stand.
It is a density measuring device with a 7-point set (JIS type field measuring instrument).
It is a density measuring device for a 7-point set (JIS type field measurement device). This is a testing method to determine the density of soil in its original position using the sand replacement method. (Limited to a maximum particle size of 53mm or less)
![[Analysis Instrumentation] OEM Product - Trace Moisture Measurement Device](https://image.mono.ipros.com/public/product/image/445/2000146335/IPROS9113280867634892124.png?w=280&h=280)
We uphold a commitment to "quality first" and deliver our products with unwavering confidence and responsibility.
The planning proposals, order acceptance, contract manufacturing, and development and production of OEM products are all fundamentally based on wisdom, passion, and originality. Our company, Nissho Electric Co., Ltd., engages in a wide range of activities including the design, manufacturing, and sales of various equipment, software development, and system design. We have obtained international certifications ISO 9001:2015 and ISO 14001:2015, establishing a globally recognized management system. We operate an effective Integrated Management System (IMS) and implement step-by-step check management through policy documents (design policy documents, manufacturing policy documents, countermeasure policy documents, etc.) from order to delivery, focusing on quality improvement and stabilization, as well as the design and manufacturing of environmentally considerate products, which is a company-wide theme. With foresight to predict market trends, we propose planning for hardware or software, while also responding to various requests for product development by leveraging our advanced technical capabilities. This unwavering spirit is supported by the energy and originality of our staff.
The highest quality inspection equipment common to all locations, anywhere in Japan or overseas.
At Parts Seiko Co., Ltd., we conduct "Quality Assurance (Quality Control and In-Process Inspection)." Starting from the Quality Assurance Department, we have established a quality assurance system at each factory, enabling direct shipments from the factories. We also inspect and guarantee products manufactured at overseas and partner factories at the Quality Assurance Department and each shipping base factory. Regarding measuring equipment, we have introduced the same inspection measuring instruments both in Japan and overseas (2D measuring machines, 3D measuring machines). By using the same measuring instruments and methods, we ensure there are no measurement discrepancies between Japan and overseas. Furthermore, at our factory in China, we have implemented material analysis equipment to manage the quality of raw materials, striving to maintain quality. 【Equipment Owned (Excerpt)】 ■ Keyence Image Measuring Machine ■ Mitutoyo CNC 3D Measuring Machine (Bridge Type) ■ Mitutoyo 2D Measuring Machine ■ FARO Gage 3D Measuring Machine (Arm Type) ■ RoHS Analysis Equipment (China Factory Only) ■ Material Analysis Equipment (China Factory Only) *For more details, please refer to the related link page or feel free to contact us.
No need to transport the measurement object! Measurement possible up to about 70m in size! Three-dimensional laser on-site measurement service with a proven track record in aerospace!
At Rinkei Mold Industry, we conduct on-site measurements using three-dimensional laser measuring machines for research institutions and aerospace equipment, nuclear equipment, and other applications that require high precision assurance. We irradiate the object being measured with a laser and measure its accuracy based on the wavelength and angle of the laser. Since our measurement staff arrives in a dedicated measurement vehicle, there is no need to transport the object being measured for inspection, making it convenient. 【Features】 ■ Suitable for precision-demanding environments such as aerospace equipment and automotive production lines ■ 3D shaped products can accommodate a wide range of data formats ■ On-site measurements available not only domestically but also internationally ■ No need to transport the object being measured for inspection ■ Measurement accuracy of ±0.05 *For more details, please refer to the PDF document or feel free to contact us.
Quick and easy measurement of the unit water content in fresh concrete is possible! 【NETIS Registration Number: QS-180032-VE】
"PICO-BT / SONO-WZ" is a testing device that allows for easy and rapid measurement of the unit water content in fresh concrete. It can measure with the same accuracy as a heating drying oven, regardless of the type of fresh concrete. By inputting the density of the concrete into this device, it is possible to measure the unit water content (kg/m³). The measurement time is quick, typically around 2 minutes for 5 measurements. *For more details, please refer to the PDF document or feel free to contact us.
It measures coating thickness non-destructively and without contact!
The measurement principle is similar to thermal reflection, where light is irradiated onto the object, and the time it takes for heat to propagate is converted into coating thickness. Measurements can be made regardless of specific materials or substances, and it is possible to measure both powders and liquids.
The resistance to penetration allows for easy diagnosis of wood decay!
The RESI PD-Series developed by IML GmbH (Germany) enables the diagnosis of wood decay through penetration resistance. By simply pressing the device against the measurement object and turning on the switch, results are easily displayed digitally. We also offer a product lineup according to the length of the drill.
Real-time measurement of polarization resistance and corrosion rate of concrete structures using completely non-destructive methods.
It can help with the maintenance and management of concrete structures because it allows for the complete non-destructive measurement of the polarization resistance and corrosion rate of concrete structures!
![[Environmental Solutions] In-Factory Mist Countermeasures Edition](https://image.mono.ipros.com/public/product/image/aa7/2000534254/IPROS38732388156933727507.png?w=280&h=280)
Good news for everyone troubled by mist in the factory! We will solve the mist problem in the factory with our mist countermeasure solutions.
Mist in factories is a concern not only for equipment malfunctions but also for its adverse effects on health and the risk of slips and falls. Our company selects models suitable for your environment from a rich lineup and provides total support from analysis and proposals to installation and effectiveness measurement. We will solve the problem of mist in factories with Morita's mist countermeasure solutions. 【Overview (Excerpt)】 ■ Mist Measurement and Environmental Analysis - Conduct mist measurements on-site to verify the environmental conditions. ■ Consideration and Proposal of Countermeasures - Select and propose products that fit the customer's situation from a diverse range of products. ■ On-site Demonstration - Install equipment on-site and operate it for a certain period to verify the mist removal effect. *For more details, please refer to the PDF materials or feel free to contact us.
We will promote the IoT transformation in medical and nursing care settings by connecting osteoporosis prevention devices with tablets and PCs via Bluetooth.
"Kakaton-ton" is a device designed to stimulate the heels to prevent a decrease in bone density, even for those who are bedridden. This time, we collaborated with Okayama University and Ozawa Medical Equipment to develop the IoT component. We connected Bluetooth with a tablet device, making it easy to set the frequency and duration of stimulation. Additionally, by linking data with a PC, it is possible to manage personal data and combine it with electronic medical records. *For more information about the Everyone's IoT Consortium, please refer to the PDF document or feel free to contact us.
[Made in the USA] Easy to set up! Can diagnose and measure various types of cables with one device. - General agent for the Asia-Pacific region [Video available]
The "Fault Chaser" series is a cable diagnostic and length measurement tester that utilizes Livewire's proprietary SSTDR technology, capable of diagnosing and measuring various standard cables all in one device. If you want to improve work efficiency and service quality, please give it a try! 【Product Information】 ◇ Equipped with SSTDR spectrum spreading time-domain reflection measurement technology: Offers higher accuracy than existing TDR fault location measurements. ◇ SSTDR technology has the characteristic of eliminating frequency interference. ◇ Measures and detects the length, disconnection, and short circuit of cables carrying voice, data, and video signals up to 3000ft (914m). ◇ Capable of testing any copper wire, including data, voice, video, and power lines. ◇ Measurement accuracy can be improved by setting different NVP (Nominal Velocity of Propagation) values for each cable. ◇ Can store and set two types of NVP values, which is convenient for testing multiple types of cables. ◇ Large LCD with backlight for easy reading of measurement results. *We have staff available who can assist you in Japanese, so please feel free to contact us if you have any questions or concerns.*
![[Free Download of White Paper] LAN Cable Tester Measurement Device](https://image.mono.ipros.com/public/product/image/ce5/2000210452/IPROS4647430807130715449.jpg?w=280&h=280)
[Made in the USA] One device, eight functions! The Net Chaser is the industry's highest performance model, capable of diagnosing network communication conditions and measuring speed.
The [NC950] series is a LAN cable checker and tester that can handle communication speed tests and performance measurements all in one device, quickly solving the concerns and problems of those who do not want to carry multiple measuring instruments for communication work. ● Capable of handling everything from LAN cable diagnostics to wiring conditions and connectivity tests in one device! Equipped with all testing functions that serve as indicators of network performance, including BER, SNR, SKEW, DHCP, PingP & URL Address, Traceroute, VLAN, and PoE. ● Supports all tests related to network communication information and speed measurement. ● Supports continuity verification, wiring route exploration, and cable diagnostics up to 1G. ● Adopts a color touch panel for intuitive operation, significantly improving efficiency. ● Automatically saves measurement results and generates reports automatically, allowing easy file transfer and backup using an SD memory card or USB cable. ● Quickly grasp the location and information of devices that build the network, such as servers, switches, and routers. ● Tests and wires LAN cables, diagnosing wiring errors of cables TIA568A/B and faults in coaxial cables, compliant with IEEE802.3. ● Supports IPv4 and IPv6.
![[Data] ACFM (Alternating Current Field Measurement) Inspection Technology Introduction](https://image.mono.ipros.com/public/product/image/a23/2000777075/IPROS05927415118720397708.png?w=280&h=280)
Applicable to materials such as iron and austenitic types! Inspection is possible from above thick coatings.
This document introduces the inspection technology 'ACFM' applicable for detecting and sizing surface openings on metal surfaces, including over paint. Our product is efficient and cost-effective, requiring minimal surface preparation. It is user-friendly and offers versatility, covering a wide range of applications and industries. We provide detailed explanations of application examples, origins, and operating principles, accompanied by photographs. We encourage you to read it. [Contents (partial)] ■ What is ACFM? ■ Overview of ACFM ■ Origin of ACFM ■ Operating principle of ACFM ■ Certification for ACFM *For more details, please refer to the PDF document or feel free to contact us.
Introducing a measuring device that can measure from 1/10000 to over 80 meters! Convenient access to Chubu Airport, capable of handling transactions with the entire world!
At the Terumic Tokoname Inspection Center, we have introduced measuring instruments capable of measuring from 1/10000 to over 80 meters. 1. We can inspect large objects like airplane wings, as well as nearly linear objects with only invisible changes, and issue inspection certificates! 2. We own a rare material analysis machine in our processing factory. It is also possible to measure materials and attach inspection reports! 3. Our facility is open for tours, and you can see our latest inspection systems and procedures! 4. Just a short distance from Chubu Centrair International Airport! Easy transactions with the entire world! *For more details about the Tokoname Inspection Center, please contact us directly.
![[Video Introduction] Processing Technology 'Image Dimension Measuring Device'](https://image.mono.ipros.com/public/product/image/b45/2000341552/IPROS788212292741986092.jpg?w=280&h=280)
Easily measurable just by placing it within the range! Introducing the image dimension measuring device.
At Thermic, where we perform parts processing, we can provide estimates in as little as 45 minutes and the shortest delivery time is 1 day. We can also process from just one part, so please feel free to consult with us first. 《Thermic's Strengths》 Estimates: Quick response with a systematized estimation process Short Delivery Time: Prompt shipping after high-precision inspection Integrated System: Support for prototypes and more Our defective product rate is less than 1% per year. We aim for zero defects by creating a database to enable feedback. *For more details, please refer to the PDF materials or feel free to contact us.
![[Technology/Product] Three-Dimensional Measurement "Crysta Plus M544"](https://image.mono.ipros.com/public/product/image/099/2000350919/IPROS1361508916791834347.jpg?w=280&h=280)
Delivery with attached three-dimensional measurement data! Precision measurement and inspection are possible.
A group of technical experts capable of meeting all processing requests for jigs, tools, and processed parts. We would like to introduce Thermic's "technology and products." Our company delivers products accompanied by data measured in three dimensions using Mitutoyo's "Crysta Plus M544." We boast a precision of less than 1/1000 mm and can accommodate lot sizes from 1 to 100 pieces. 【Features】 ■ Precision measurement ■ Scanning probe ■ Delivery with three-dimensional measurement data *For more details, please feel free to contact us.
The world's only film that visualizes contact pressure.
The world's only pressure measurement film. It allows you to easily check pressure and pressure distribution that were previously invisible.
![[Presscale Use Case] CMP Polishing Head](https://image.mono.ipros.com/public/product/image/d2f/2000983973/IPROS64294872587000810618.png?w=280&h=280)
Significant improvement in design efficiency! Introducing examples of achieving time reduction and quality enhancement.
We would like to introduce a case where a prescale was utilized to confirm the uniformity of the CMP polishing head. Continuing production without a clear understanding of the causes of polishing defects led to issues such as insufficient precision and frequent occurrences of defective products. After implementation, we achieved time savings and quality improvement by gaining useful insights into polishing uniformity and the adjustment of polishing speed. 【Case Overview】 ■Challenges - Insufficient precision - Frequent occurrences of defective products ■Results - The uniformity of the contact area could be adjusted during the design phase, significantly improving design efficiency. - We were able to reduce variability between CMP devices. *For more details, please refer to the PDF document or feel free to contact us.
