Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
3691～3720 item / All 3784 items
![Fundamentals of Electrochemical Analysis Part 2 [Technical Document]](https://image.mono.ipros.com/public/product/image/145/2000268526/IPROS8712980791536252140.jpg?w=280&h=280)
This is the second technical booklet explaining the basics of voltammetry, CVS, and polarography, which are essential for trace metal analysis in solutions and the analysis of plating solutions!
Table of Contents 1. Stripping Method 2. Anodic Stripping Voltammetry 3. Cathodic Stripping Voltammetry
Non-destructive, simple, and fast measurement of metal stress! Compact and lightweight, incredibly easy to use!
The "μ-X360s" is a portable measuring device that can non-destructively measure the stress of metals. Both setup and operation are simple, allowing for high-speed measurements in just 60 seconds each. Particularly for large structures, it can measure directly rather than using cut samples, which is helpful in identifying the causes of cracks and other issues. Using a shielding box, measurements can also be conducted without the need for an "X-ray work supervisor" qualification. It has received the "Academic Encouragement Award" from the Japan Non-Destructive Testing Association and the "Technical Development Award" from the Japan Society for Technology of Plasticity. ★ Free trial measurements are currently available ★ We are currently offering free trial measurements. Please contact us through the "Contact Us" section below. 【Features】 ■ Lightweight with a total weight of approximately 8.6 kg (sensor part: about 2.4 kg) and long-lasting battery ■ Capable of measuring the interior of pipes with an inner diameter of 170 mm ■ Utilizes the excellent cosα method for measurements ■ Air-cooled design *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Simultaneously records changes in temperature and humidity - Analog temperature and humidity recorder.
This is an analog temperature and humidity recorder that can simultaneously record changes in temperature and humidity. ■ It has built-in temperature and humidity sensors, so you can start using it immediately by simply setting up the recording paper and pen. ■ It uses a circular chart, making it easy to see changes in the recordings at a glance. ■ You can continuously record each period on a single sheet of recording paper. Attaching and removing the recording paper is also easy. ■ It is powered by batteries, so you can feel secure even during sudden power outages.
Next-generation ultra-small chip size (03015 size) compatible astonishing ultra-high-speed, high-precision digital resistance checker.
Suitable for D, F, G, J, K grades, compatible with ultra-small chips (size 03015) - ideal for taping machines.
Support for automating measurement tasks that are difficult to robotize! Even those without experience in robot operation can easily set it up. *Video of the measurement scene available.
In measurement operations, do you have any of the following concerns? ■ I want to improve the efficiency of simple manual tasks. ■ I want to automate manual inspections but don't know how to proceed. ■ I want to assist individuals with disabilities in measurement tasks. We at Zensei will strongly support these desires and requests. In the measurement operations, which are said to be difficult for robot utilization, we have achieved "robotization" through Zensei's measurement know-how and the introduction of JAKA robots. The "JAKA Zu series" is a collaborative robot that ensures safety, is affordable, and easy to implement. Teaching can be easily set up using a dedicated app on tablets or mobile devices. With this product and Zensei's measurement expertise, we will realize the automation of measurement operations with robots, which was previously thought impossible. 【Features】 ■ Efficiency improvement in measurement operations ■ Proposals based on experience as a measurement instrument and gauge manufacturer ■ Performing multiple processes with a single machine without changing tools ■ Can compensate for labor shortages and workspace issues ■ Experience and know-how with automobile manufacturers *For more details, please refer to the PDF document or feel free to contact us.
Toxireipro HCHO is the world's first personal wireless formaldehyde monitor.
With Toxilei Pro, safety managers can wirelessly access real-time readings and alarm statuses to visually confirm more detailed situations and achieve quicker responses, making it possible to ensure worker protection before threats reach the next level. Measurement range 0-10 ppm, for safety management during work when there is a possibility of formaldehyde generation.
The FJN-501C allows for water pressure management by recording water pressure fluctuations with a three-stage switch type of 15 minutes, 30 minutes, and 60 minutes.
Ensuring stable water pressure, recording pressure fluctuations to understand appropriate water pressure, identifying issues such as poor water supply, the need for pressure reduction, and checking for leaks, allows for rapid response and measures to be implemented through data collection, enabling more relaxed water pressure management. Additionally, it can be utilized as feedback data for direct water supply and the improvement and strengthening of pipeline networks.
It's lightweight and compact, making it easy to carry.
It supports a 3-way power supply: rechargeable battery, AC adapter, and dry batteries (dry batteries are not included). *Please choose the type according to your needs. - PB-F-30 (capacity 15/30kg) - PB-F-60 (capacity 30/60kg) - PB-F-150 (capacity 60/150kg)
You can measure residual salt/pH/cyanuric acid alkalinity/calcium hardness.
The MD100 series is a portable water quality meter with a lightweight, compact, and simple design, featuring no moving parts around the measurement area. It employs long-lasting LED lamps and high-precision interference filters for reliable measurements. It allows for easy operation and high reproducibility of measurements in a short time. The measurement items can be used for various applications, including water purification management such as residual chlorine and pH, boiler water management such as silica, and wastewater management such as COD. The measurements utilize Lovibond tablet reagents, powder reagents, and liquid reagents, which guarantee long-term stability of 5 to 10 years.
Explaining the analysis items related to texture and chewiness! Examples of measurements for rice, noodles, vegetables, and meat are also included.
This document is a technical resource that summarizes measurement examples for various items related to texture and chewiness, including rice, noodles, vegetables, and meat. We hope it will be useful for food manufacturers, food-related equipment manufacturers, schools, and research institutions that measure and analyze the physical properties of food. * The technical document can be viewed via PDF download. * For more details, please feel free to contact us.
Support the pursuit of "deliciousness" through the quantification of chewing sensation. Examples of texture analysis for fried chicken, rice, cucumbers, bread, and more are included. Exhibition participation information is available.
This document introduces the structure and mechanism of our texture measurement device, 'TENSIPRESSER', as well as the relationship between texture and "deliciousness," and examples of texture analysis. It also presents the 'TENSIPRESSER MyBoyII SYSTEM', which features a simple and compact design. If you are considering quantifying the chewiness of elastic foods such as meat, rice, and gummies, please take a look. ◎ We will be exhibiting at "FOOMA JAPAN 2023" starting June 6. 【Texture Analysis Items】 ■ One-Bite Breakage Measurement... Measures breakage strength with a single chewing action ■ Two-Bite Texture Measurement... Analyzes with two chewing actions ■ Multi-Accumulation Bite Measurement... Gradually accumulates deformation distance to analyze elastic chewability ■ Rice Group Particle Measurement... Achieves visual analysis by converting physical property values into a radar chart *For more details, please refer to the document available for PDF download. Feel free to contact us with any inquiries.
Introducing the recommended balance grades for various rotating machines (JIS B 0905-1992)!
I will introduce "the balance quality of rotating machinery." Balance quality is defined by JIS B 0153-1985 as "a quantity that indicates the degree of balance of a rigid rotor, which is the product of the unbalance and a specified angular velocity." For more details, please refer to the related link. 【Balance Quality Grades】 ■G4000~G0.4 *For more information, please download the PDF or feel free to contact us.
You can obtain the flow characteristics that serve as molding indicators during the molding of thermoplastic elastomer materials!
We would like to introduce the "Viscoelasticity Measurement Device" that we have. The torque range is from 0.02 uNm to 200 mNm, and the strain rate range is from 0.001 to 1000 S-1. The temperature range is from -150°C to 400°C. It is capable of a wide range of rheological measurements from liquids to solids. It is equipped with measurement modes such as dynamic viscoelasticity, steady flow viscosity, stress relaxation, creep, solid torsion, film tensile, and elongational viscosity. 【Device Specifications】 ■ Device Name: MCR301 (manufactured by Anton Paar) ■ Torque Range: 0.02 uNm to 200 mNm ■ Strain Rate Range: 0.001 to 1000 S-1 ■ Temperature Range: -150°C to 400°C ■ Sample Amount: 10g to 50g *For more details, please refer to the related links or feel free to contact us.
![[Improving Inspection Accuracy] [Video Available] Projection Dimension Measuring Instrument 'GS-065'](https://image.mono.ipros.com/public/product/image/319/2000561359/IPROS46559064352293110024.jpeg?w=280&h=280)
From sampling inspection to 100% inspection! A projection dimension measuring instrument that significantly reduces measurement time.
The GS-065 is a projection dimension measuring instrument that allows for non-contact, tool-free inspection of all items. It is equipped with a highly reliable unit from Keyence. Since it is a projection type, measurements are taken without touching the object being measured. There is no worry about deformation or scratching during measurement. The measurement time has been significantly reduced to less than one second. It is also possible to convert what was previously a sampling inspection into a full inspection. 【Features】 ■ Equipped with a rotating table ■ Non-contact, tool-free ■ Significantly reduced measurement time ■ Capable of high-precision measurements *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
![[Inspection Data Accumulation] [Video Available] Projection Dimension Measuring Instrument 'GS-065'](https://image.mono.ipros.com/public/product/image/6d9/2000561360/IPROS95820698912037310880.jpeg?w=280&h=280)
From sampling inspection to 100% inspection! A projection dimension measuring instrument that significantly reduces measurement time.
The GS-065 is a projection dimension measuring device that allows for non-contact, tool-free inspection of all items. It is equipped with a highly reliable unit from Keyence. Since it is a projection type, measurements are taken without touching the object being measured. There is no concern about deformation or scratches during measurement. The measurement time has been significantly reduced to under one second. It is also possible to switch from sampling inspection to full inspection. 【Features】 ■ Equipped with a rotating table ■ Non-contact, tool-free ■ Significantly reduced measurement time ■ Capable of high-precision measurements *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
From sampling inspection to 100% inspection! A projection dimension measuring instrument that significantly reduces measurement time.
The GS-065 is a projection dimension measuring device that allows for non-contact, tool-free inspection of all items. It is equipped with a highly reliable unit from Keyence. Since it is a projection type, measurements are taken without touching the object being measured. There is no worry about deformation or scratches during measurement. The measurement time has been significantly reduced to under one second. It is also possible to conduct full inspections instead of just sampling. 【Features】 ■ Equipped with a rotating table ■ Non-contact, tool-free ■ Significantly reduced measurement time ■ Capable of high-precision measurements *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
![[High Versatility] [Video Available] Projection Dimension Measuring Instrument 'GS-065'](https://image.mono.ipros.com/public/product/image/20d/2000561366/IPROS52552328813365573763.jpeg?w=280&h=280)
From sampling inspection to 100% inspection! A projection dimension measuring instrument that significantly reduces measurement time.
The GS-065 is a projection dimension measuring device that allows for non-contact, tool-free inspection of all items. It is equipped with a highly reliable unit from Keyence. Since it is projection-based, measurements are taken without touching the object being measured. There is no concern about deformation or scratches during measurement. The measurement time has been significantly reduced to under one second. It is also possible to switch from sampling inspection to full inspection. 【Features】 ■ Equipped with a rotating table ■ Non-contact and tool-free ■ Significantly reduced measurement time ■ Capable of high-precision measurements *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Are you not using water or alcohol for particle size measurement with a fine sieve? It took 2 hours for the measurement, but now you only have to wait an astonishing 5 minutes! *Test measurements available.
The "Fine Jet Sieve" is a high-performance particle size measurement device that uses a sieve. When measuring the particle size of powders with a fine sieve, it is typically done using a wet method with water or alcohol, which requires drying and takes a considerable amount of time. With the adoption of the practical utility model air jet nozzle, the "Fine Jet Sieve" allows for accurate and easy measurement of even ultra-fine sieve openings in a dry method and in a short time. It is very effective for use in manufacturing sites for the operational management of grinding and classification systems. 【Features】 ■ Capable of accurate dry measurement even for ultra-fine sieve openings ■ Processes in a short time ■ High measurement accuracy ■ JIS standard sieves can be used *If you send us a sample, we will measure it for free. The results will be sent along with a demonstration video and data. *For more details, please refer to the catalog or feel free to contact us.
It is possible to create 3D data from molds! You can also compare it with the mold before the design change.
We would like to introduce our equipment, the "3D Measuring Machine." By scanning molds, it is possible to create 3D data from the molds. You can make design changes on the created data and also compare it with the mold before the design changes. Please feel free to contact us if you have any requests. 【Features】 ■ It is possible to create 3D data from molds. ■ Design changes can be made on the created data, and comparisons with the mold before design changes are also possible. *For more details, please refer to the related links or feel free to contact us.
Explanation of the method for measuring the straightness of a shaft!
In the automotive industry, the precision of shafts is a crucial factor that affects the performance and safety of products. Particularly for shafts that are responsible for rotational motion, even a slight deviation in straightness can lead to vibrations and abnormal noises, ultimately shortening the product's lifespan. This video explains the measurement method for "straightness," a type of geometric tolerance. By understanding straightness, it becomes possible to accurately grasp design intentions and improve the efficiency of processing and inspection. 【Application Scenarios】 - Quality control in the shaft manufacturing process - Inspection of automotive parts - Tolerance setting during the design phase 【Benefits of Implementation】 - Improvement in shaft quality - Reduction of defective products - Shortening of inspection time
Helpful for precision management of robotic arms! Explanation of the measurement method for straightness.
In the manufacturing and maintenance of robotic arms, the straightness of the arm is crucial. Poor straightness can lead to inaccurate movements, resulting in defective products and decreased work efficiency. This video explains the measurement method for "straightness," a type of geometric tolerance. Please use this video as a reference for quality control of robotic arms. 【Application Scenarios】 * Quality control in the manufacturing process of robotic arms * Accuracy verification during the maintenance of robotic arms * Shape consideration during the design phase of the arm 【Benefits of Implementation】 * Improved operational accuracy of robotic arms * Reduction of defective products * Enhanced work efficiency
Video materials useful for measuring the straightness of propellers!
In the shipbuilding industry, the performance of propellers greatly affects the efficiency of vessels. The shape accuracy of propellers is a crucial factor that influences propulsion efficiency, and measuring straightness is essential to ensure that quality. If straightness is not properly managed, it can lead to vibrations and a decrease in propulsion efficiency, ultimately resulting in worsened fuel consumption and potential damage to the hull. This video explains the measurement method for straightness, which is one of the geometric tolerances. Please utilize this information to improve quality control in the manufacturing and inspection processes of propellers. 【Application Scenarios】 - Quality control in the propeller manufacturing process - Propeller inspection processes - Shape accuracy verification during the propeller design phase 【Benefits of Implementation】 - Improved propeller quality - Enhanced fuel efficiency of vessels - Reduced risk of damage to the hull
Explaining the measurement method for geometric tolerance "straightness"!
In the field of precision measurement, accurate measurements are required to ensure product quality. In particular, straightness is an important factor in evaluating the accuracy of parts. If the measurement of straightness is inaccurate, it may lead to problems in the assembly and operation of the product. This video explains the measurement method of "straightness," which is a type of geometric tolerance. 【Application Scenarios】 - Evaluation of machine tool accuracy - Calibration of measuring instruments - Quality inspection of parts 【Benefits of Implementation】 - Increased measurement efficiency - Improved quality management - Reduction of defective products
![Introduction to 3D Measuring Machines [Able to detect partial shape changes!]](https://image.mono.ipros.com/public/product/image/502/2000911418/IPROS40771272988807479162.png?w=280&h=280)
Since the entire product can be evaluated, it is possible to detect partial shape changes such as bending!
We would like to introduce the "precision measurement equipment" that we possess. This equipment can evaluate the entire product, allowing us to detect partial shape changes such as bending. We have introduced Tokyo Seimitsu's three-dimensional coordinate measuring machine, the "mju NEX-C6," among others. Additionally, we can accept orders in a one-stop manner, from just creating drawings to mold manufacturing and the production and sale of die-cast products, tailored to our customers' needs. 【Equipment Owned】 ■ Tokyo Seimitsu Three-Dimensional Coordinate Measuring Machine: mju NEX-C6×1 ■ Keyence Handheld Probe Three-Dimensional Measuring Machine: XM-T1200×1 ■ Keyence 3D Scanner Type Three-Dimensional Measuring Machine: VL-500×1 ■ Keyence 3D Scanner Type Three-Dimensional Measuring Machine: VL-700×1 *For more details, please refer to the PDF document or feel free to contact us.
![Introduction to 3D Measuring Machines [General measuring machines only determine contact points!]](https://image.mono.ipros.com/public/product/image/7d1/2000911422/IPROS45245353419604178237.png?w=280&h=280)
With a typical measuring device, it can only determine the part that the measuring element has come into contact with!
We would like to introduce the "precision measurement equipment" that we possess. General measuring instruments can only determine the parts that the measuring probe comes into contact with, but we have the "mju NEX-C6," a three-dimensional coordinate measuring machine from Tokyo Seimitsu, as well as Keyence's handheld probe three-dimensional measuring machine "XM-T1200." We can accept orders in a one-stop manner, from just creating drawings to mold manufacturing and the production and sale of die-cast products, tailored to our customers' needs. Please feel free to contact us when you need our services. 【Equipment Owned】 ■ Tokyo Seimitsu Three-Dimensional Coordinate Measuring Machine: mju NEX-C6×1 ■ Keyence Handheld Probe Three-Dimensional Measuring Machine: XM-T1200×1 ■ Keyence 3D Scanner Type Three-Dimensional Measuring Machine: VL-500×1 ■ Keyence 3D Scanner Type Three-Dimensional Measuring Machine: VL-700×1 *For more details, please refer to the PDF document or feel free to contact us.
![Introduction to 3D Measuring Machines [It is possible to change measurement methods or add measurement locations!]](https://image.mono.ipros.com/public/product/image/84f/2000911428/IPROS07923455586006975191.png?w=280&h=280)
If you keep the captured data, it is possible to change the measurement method or add measurement locations!
The "precision measurement equipment" we possess allows for changes in measurement methods or the addition of measurement locations as long as the captured data is retained. We have introduced Tokyo Seimitsu's three-dimensional coordinate measuring machine "mju NEX-C6" and 3D scanner-type three-dimensional measuring machines "VL-500" and "VL-700." In response to customer requests, we can accept orders ranging from just drawing production to mold manufacturing and the production and sale of die-cast products in a one-stop service. Please feel free to contact us when needed. 【Equipment Owned】 ■ Tokyo Seimitsu Three-Dimensional Coordinate Measuring Machine: mju NEX-C6×1 ■ Keyence Handy Probe Three-Dimensional Measuring Machine: XM-T1200×1 ■ Keyence 3D Scanner-Type Three-Dimensional Measuring Machine: VL-500×1 ■ Keyence 3D Scanner-Type Three-Dimensional Measuring Machine: VL-700×1 *For more details, please refer to the PDF document or feel free to contact us.
