Measuring Instrument Product List and Ranking from 1157 Manufacturers, Suppliers and Companies | IPROS GMS

Various inspections, inspection equipment, and inspection system.

A consistent quality control system from material procurement to manufacturing and shipping! Introducing the inspection tools of our inspection room.

At Ito Seiko Co., Ltd., we have established a thorough quality control system. Our inspection equipment is centralized in a dedicated inspection department, and we strive to ensure stable quality using various inspection devices, not only for shipping inspections but also for initial product inspections and fixed-point inspections during the processing stages. 【Introduction to Inspection Equipment】 ■ Keyence: 3D scanner-type three-dimensional measuring machine VL SERIES VL-570/550 (low magnification ø300×H200/high magnification ø70×H50) ■ Tokyo Seimitsu: Three-dimensional measuring instrument SUA600A X600×Y500×Z450 1/10000 ■ Keyence: Digital microscope VHX-8000 ■ Tokyo Seimitsu: Roundness measuring instrument RONDCOM54 ø10-200 1/10000 ■ Rigaku: Portable component analyzer XL3t-980S ■ Other inspection equipment: Surface roughness and contour measuring machine ×1 Surface roughness measuring instrument ×1 Contour measuring instrument ×1 Handheld probe three-dimensional measuring instrument ×1 Image measuring instruments ×5 Measuring microscopes ×2 Projectors ×4 *For more details, please refer to the PDF document or feel free to contact us.

[Case Study] Comparison of Scanning Accuracy between 3D Laser Scanners and X-ray CT Devices

I will introduce a comparison of the scanning accuracy between 3D laser scanners and X-ray CT devices.

When performing reverse engineering, it is necessary to obtain point cloud data of the sample's shape, and the major methods for data acquisition are 3D laser scanning and X-ray CT scanning. Each method has its advantages and disadvantages, but which scanning method offers better accuracy (i.e., higher shape reproducibility)? In this case, we will verify the extent of error and distortion in the scan data from the 3D laser scanner and the X-ray CT scanner based on the dimensions measured by a three-dimensional measuring machine. The procedure is as follows: 【Step 1】 Obtain point cloud data of the sample's shape using a 3D laser scanner. 【Step 2】 Obtain point cloud data of the sample's shape using an X-ray CT scanner. 【Step 3】 Conduct dimensional measurements using a three-dimensional measuring machine. 【Step 4】 Extract dimensional data from the point cloud data in Steps 1 and 2, and compare it with the dimensional data from Step 3.

CPM-PDS integrated measurement device 'OKL-CPM-PDS-500'

A product suitable for measuring the absorption coefficient of thin-film solar cell materials!

The "OKL-CPM・PDS-500" is a compact integrated measurement device that allows for the measurement of both CPM and PDS with a single unit. Using a transmission light measurement method and adopting a technique to eliminate the effects of film interference, it enables accurate calculation of defect density. Additionally, for PDS, a separate grating for infrared spectroscopy is provided to allow measurements in the long wavelength range. 【Features】 ■ Utilizes our unique method for CPM measurement, enabling accurate defect density calculation by suppressing interference ■ PDS can measure up to a long wavelength of 0.4[eV] ■ Compact and economical integrated CPM and PDS ■ Fully automated measurement with no hassle *For more details, please download the PDF or feel free to contact us.

Non-contact thickness measurement technology measuring instrument

The absolute value of thickness can be measured instantly! Maintaining a measurement accuracy of 0.1μm.

【Thickness Measurement with Infrared Light】 Infrared light can penetrate certain materials. This technology utilizes that property to measure the thickness of specific materials non-contactly. It measures the thickness and shape of materials such as silicon wafers, sapphire, and glass without contact. We propose and develop measurement devices tailored to needs, including optical interference methods and displacement gauge methods. 【Features】 ■ Thickness measurement is possible without deforming the material, as long as it transmits infrared light. ■ Absolute values can be measured using the infrared method. ■ Measurement distances can be set arbitrarily up to approximately 1000mm. *For more details, please contact us or download the PDF to view.

Earth Co., Ltd. Company Profile

Coordinating mold design and manufacturing! The accumulation of accurate measurement data has gained trust.

Earth Co., Ltd. conducts dimensional measurements of molded and pressed parts, as well as the design and production of molds for plastic molding. We offer a wide range of dimensional measurements using tool microscopes and 3D measuring machines, accommodating everything from small lots to large-scale production. If you have any concerns or questions regarding dimensional measurements, molds, or molding, please feel free to contact us. 【Business Items】 ■ Dimensional measurement of molded and pressed parts ■ Measurement and creation of data for mold certification ■ Design and production of molds for plastic molding ■ Plastic molding processing *For more details, please refer to the PDF document or feel free to contact us.

[About Dimension Measurement] 3D Measuring Machine

Accurate evaluation is possible with XYZ three-dimensional direction measurement! We provide precise measurement values with contact methods!

We use a three-dimensional measuring machine to measure the dimensions of products and parts. It is used for relatively large measurement items that cannot fit within a microscope measuring up to 700mm × 700mm × 600mm. It enables measurement in the XYZ three-dimensional directions and provides accurate measurement values by making contact with the measurement item. In recent years, three-dimensional dimensional evaluation, such as geometric tolerances, has become necessary, and accurate evaluations are possible by utilizing the functions of the three-dimensional measuring device. When measuring a large number of identical shapes, measurement programs are created. By repeatedly measuring the same location, more precise and reliable measurements are achieved. 【Features】 ■ Used for relatively large measurement items ■ Accurate evaluation possible with XYZ three-dimensional measurements ■ Accurate measurement values can be provided by making contact with the measurement item ■ Measurement programs are created when measuring a large number of identical shapes ■ More precise and reliable measurements are achieved by repeatedly measuring the same location *For more details, please refer to the PDF document or feel free to contact us.

The importance of understanding the residual dikumarol peroxide amount in polymer products.

NC type horizontal feeding method inner diameter automatic measuring device

We accommodate a variety of products through the replacement of segment parts! We have small, medium, and large sizes available.

We handle the "NC-type horizontal feed inner diameter automatic measurement device." Available in small, medium, and large sizes. In addition to accommodating a variety of products through part replacement for different stages, it features an automatic calibration function based on time units or quantity units. Based on the know-how we have cultivated since our founding, we consistently carry out everything from design to manufacturing to help optimize our customers' operational efficiency and production lines. Please feel free to consult us about anything. 【Features】 ■ Available in small, medium, and large sizes ■ Supports a variety of products through part replacement for different stages ■ Equipped with an automatic calibration function based on time units or quantity units *For more details, please refer to the PDF document or feel free to contact us.

Buried Cable Location Measuring Device "MPL-H11P"

Selectable frequencies suitable for exploration sites! New devices in the "MPL series" with improved operability and convenience.

The "MPL-H11P" is an embedded cable location measurement device equipped with remote control functionality, allowing frequency switching and output adjustment from the receiver to the transmitter. A noise measurement function has been added, enabling the selection of suitable frequencies for the exploration site. The transmitter's bar graph allows for a more detailed confirmation of the grounding status. 【Features】 ■ Equipped with remote control functionality, allowing frequency switching and output adjustment from the receiver to the transmitter ■ Noise measurement function added, enabling the selection of suitable frequencies for the exploration site ■ The transmitter's bar graph allows for a more detailed confirmation of the grounding status *For more details, please refer to the PDF document or feel free to contact us.

Aerial Ultrasonic Sensor: Introduction to Ultrasonic Distance Measurement

Detection of paper re-delivery, edge position control, distance measurement, gas flow measurement, etc.! Solutions can also be provided through custom support.

Unicron has a consistent production line that includes the unique formulation of ceramic materials, the production of piezoelectric elements, and the assembly of air transducer finished products. In each process, we adjust the mechanical and electrical performance of the transducers. We are advancing product development by fully utilizing the know-how we have cultivated over many years. ■ Application Examples The liquid level remaining in tanks and similar containers is measured using an integrated ultrasonic transducer that calculates using ToF (Time of Flight). *For more details, please download the PDF document or feel free to contact us.

Tōbi Trading Co., Ltd. Company Profile

We support the creation of a comfortable "building and office environment."

Tōbi Shōji Co., Ltd. is a company that primarily sells environmental measurement equipment in accordance with the Building Management Act and office hygiene standards, providing devices and commercial equipment that contribute to the safety and comfort of building facilities. Our company handles a wide range of products related to various (environmental) measurement devices and the maintenance and management of buildings in accordance with the "Law on Securing a Sanitary Environment in Buildings" and the "Office Hygiene Standards Regulations." 【Business Activities】 ■ Environmental measurement equipment ■ Environmental beautification products ■ Office environment-related ■ Insurance agency for property and life insurance *For more details, please refer to the PDF materials or feel free to contact us.

Measuring device "DSA700S"

Equipped with a long-term measurement mode of up to 2 weeks! A measuring instrument for CATV installation work.

We handle the measuring instrument 'DSA700S' used for CATV installation work. Simple operation is achieved with buttons assigned for "Single Channel," "Scan Measurement," "Tilt Measurement," and "BS/CS Measurement." With high-response operation and high-speed measurement, it accelerates measurement work in the field. 【Features】 ■ Equipped with a long-term measurement mode of up to 2 weeks ■ Firmware update function via the internet ■ Smooth operation with a click-type dial encoder (used for channel up/down and item selection, etc.) *For more details, please download the PDF or contact us.

[Instruction Manual] Center Multi Gauge 'CMG-500'

We explain the preparation before the work begins, as well as features and basic operations!

This document is the instruction manual for the Center Multi Gauge "CMG-500." The "CMG-500" allows you to move the center section while supporting both ends, enabling you to find the kick point and accurately locate the spine at the kick point by rotating the shaft. Please read this instruction manual carefully before use and ensure that you use it correctly and safely. 【Contents】 ■ Confirmation before preparation ■ Preparation before work ■ Features of the Center Multi Gauge ■ Basic operation section ■ Optional operation section ■ Cautions *For more details, please refer to the PDF document or feel free to contact us.

Center Flex Meter "CFG-910"

You can compare with both the head and grip attached! Digital display center flex gauge.

The "CFG-910" is a center flex gauge that can measure the load applied to the shaft. By measuring not only the center but also any arbitrary position, it allows for a comparison of the hardness at the tip and butt side, enabling more advanced club settings. Additionally, spine measurement is also a simple process that just requires setting it up. 【Features】 ■ Digital display ■ Stable measurement ■ Simple spine measurement with just setup ■ Can compare with the head and grip attached ■ Allows for easy visual confirmation of distortion by rotating the shaft *For more details, please refer to the PDF materials or feel free to contact us.

Gear Specification Gauge "GS-450"

Of course, it is compatible with 460cc, as well as putters and irons! It can be used for both left and right-handed players, and the real loft can be adjusted as desired!

The "GS-450" is a gear specification gauge that can simultaneously measure real loft and face angle. It employs a large gauge for accurate measurement, allowing loft to be measured from 0 degrees to 60 degrees in 0.5-degree increments, compatible with drivers, putters, fairway woods, and irons. Additionally, face progression can be measured from -10 mm to +20 mm. 【Features】 ■ Simultaneous measurement of real loft and face angle ■ Loft measurement from 0 degrees to 60 degrees in 0.5-degree increments ■ Compatible with drivers, putters, fairway woods, and irons ■ Precise measurement enabled by clamping at the shaft center ■ Linear guide adopted for smooth measurement ■ Special resin used at the shaft clamp area to minimize scratches *For more details, please refer to the PDF document or feel free to contact us.

[Rental & Lease] Electric Tools, Metal Processing, Measuring Instruments Catalog

We have a wide range of products including "electric drills" and "Atla Ace"!

This catalog introduces electric tools, metal processing equipment, and measuring instruments rented and leased by Onoden Lease Co., Ltd. It features a wide range of products including "electric drills and impact wrenches," as well as "electric hydraulic punchers" and "torque wrenches." You can rent and lease "what you need, when you need it, for the duration you need." Please feel free to consult with us. 【Contents】 ■ Electric drills, impact wrenches, cutting machines, reciprocating saws ■ Atla Ace, low-profile Atla Ace ■ Electric hydraulic punchers ■ Torque wrenches, shear wrenches, construction first, axial force gauges *For more details, please refer to the PDF document or feel free to contact us.

Living Activity Reaction Measurement Device

Real-time. No color development process required. Trace amount reagents enable high-sensitivity analysis.

We offer a "Living Activity Reaction Measurement Device" that allows for easy measurement of enzyme reactions. Unlike ion-selective sensors, it can accommodate various reaction systems by selecting reagents according to the purpose. Additionally, by adopting a CMOS structure, charges are accumulated within the sensor, and after amplifying the signal inside the sensor, the signal-to-noise ratio (S/N ratio) is improved, enabling high-sensitivity measurements. 【Features】 ■ Compatible with various measurement systems using the same sensor ■ High-sensitivity measurements possible ■ Capable of trace measurements ■ Real-time observation of reactions *For more details, please download the PDF or feel free to contact us.

Non-invasive cholesterol measurement device 'CLE-110'

Results can be obtained in a short time! A cholesterol measuring device that can measure various concentrations without blood sampling.

"CLE-110" is a device that non-invasively measures the concentration of cholesterol esters in human skin and assesses total cholesterol and LDL levels in the blood. Using the infrared ATR method, it can measure various concentrations without the need for blood sampling. With a combination of a high-performance infrared detector and a high-precision bandpass filter, measurement results can be obtained in a short time. 【Features】 - Easily measure cholesterol ester levels without blood sampling - No reagents or pre-treatment required - Compact tabletop design that saves space - Achieves rapid measurement - Measurement control and data processing are all controlled by a PC *For more details, please refer to the PDF document or feel free to contact us.

Saknai Industrial Co., Ltd. Headquarters In-house Inspection Facility Equipment

We have a wide range of equipment, including a three-dimensional measuring machine (CNC), at our inspection facility!

Saknai Industries has numerous suppliers and partner companies both domestically and internationally, and is a company skilled in broad procurement across various fields and genres related to manufacturing. We possess inspection equipment including the three-dimensional measuring machine (CNC) "XYZAX FUSION NEX," surface roughness measuring machine "SJ-410," and image dimension measuring machine "IM-6225T." Along with our abundant procurement routes, which are one of our strengths, we conduct in-house quality management tailored to our customers' needs, assisting in cost reduction and quality improvement. 【Equipment Owned (Excerpt)】 ■ Three-dimensional measuring machine (CNC) "XYZAX FUSION NEX" ■ Three-dimensional measuring machine (manual) "Crysta plus m574" ■ Handheld probe three-dimensional measuring machine "XM-T1200" ■ Microscope measuring device "MEASURING MICRO SCOPE MF" ■ Roundness and cylindrical shape measuring machine "RONDCOM NEX Rs" *For more details, please refer to the PDF document or feel free to contact us.

Image Dimension Measuring Device AT-Measure ST1

Anyway, it's easy! Just click.

■□■ Super Easy! ■□■ ● Easy Setup First, place the object and with just one click, the system automatically performs a preliminary measurement of potential dimensions. After that, you can freely edit and add the areas you want to measure and register the varieties. ● Easy! No Alignment Needed The measurement automatically recognizes the position of the object and measures dimensions automatically. It also supports rotation. ● Easy Automatic Measurement Just place the object and click once! It automatically measures the dimensions of the registered areas. ● Easy Data Saving Measurement values can be saved in Excel data format. Still images can also be saved. ■□■ Super High Precision ■□■ ● Dual-Sided Telecentric Lens Adoption With the adoption of dual-sided telecentric lenses, there is no image distortion, achieving high-precision dimension measurement. ● Parallel Light Transmission Lighting Adoption With the adoption of parallel light transmission lighting, there is less light wrapping around the object, resulting in clear contours and emphasized edges, achieving high-precision dimension measurement.

Image Dimension Measuring Device AT-Measure ST2

Anyway, it's easy! Just click. With the use of telecentric lenses on both sides, highly accurate automatic image dimension measurement is possible!

■□■Super Easy!■□■ ●Easy Setup First, place the object and with just one click, it automatically performs a preliminary measurement of the dimension candidates. After that, you can freely edit and add the areas you want to measure and register them. ●Easy! No Alignment Needed The measurement automatically recognizes the position of the object and performs dimension measurement automatically. It also supports rotation. ●Automatic Measurement Made Easy Just place the object and click once! It automatically measures the dimensions of the registered areas. ●Easy Data Saving Measurement values can be saved in Excel data format. Still images can also be saved. ■□■Super High Precision■□■ ●Adoption of Dual-Sided Telecentric Lenses With the adoption of dual-sided telecentric lenses, there is no distortion in the image, achieving high-precision dimension measurement. ●Adoption of Parallel Light Transmission Illumination With the adoption of parallel light transmission illumination, there is less light wrapping around the object, resulting in clear contours and emphasized edges, achieving high-precision dimension measurement.

Utilizing Research on Dementia and Lifestyle-Related Diseases! MFD Series

Introducing a mouse feeding and drinking behavior measurement device that can simultaneously measure three parameters!

The "MFD Series" is a simultaneous measurement system for mouse feeding, drinking, and activity levels. It allows for the simultaneous measurement of three parameters: "feeding," "drinking," and "activity level," making it suitable for research on metabolic syndrome such as obesity and diabetes, as well as for measuring circadian rhythms and screening TG mice. The uniquely shaped feeding section features a food box installed with a step on the side of the cage, making it difficult for mice to enter the food box or carry food into their living space. 【Features】 ■ Simultaneous measurement of three parameters: "feeding," "drinking," and "activity level" ■ The drink sensor can be selected from two types: a cost-effective and reliable drop-type and a precision scale type for measuring drinking volume ■ The activity level is measured using a beam sensor method that allows for inter-individual comparisons *For more details, please refer to the external link page or feel free to contact us.

Neuroelectrochemical research system

Fast-scan cyclic voltammetry (FSCV) is an electrochemical technique that has become widespread over the past few decades.

Fast-scan cyclic voltammetry (FSCV) is an electrochemical technique that has become popular over the past few decades. FSCV is used for analytical measurements in dynamic environments. Pine Research, Inc. is the only manufacturer that handles FSCV systems.

Portable Particle Size Distribution Measurement Device 'PAMS'

Compact and easy to carry! Improved maintainability with detachable charging system!

"PAMS" is a portable particle size distribution measuring device with improved maintainability due to its detachable charge feature. It is compact and easy to carry, as it is battery-operated and does not require a PC. It can measure particle size distribution in two ranges: wide range and high resolution. The adoption of a neutralizer using a bipolar charging method eliminates the need for radioactive materials. 【Features】 ■ Detachable charge feature ■ Improved maintainability ■ Compact and easy to carry ■ Capable of measuring particle size distribution in two ranges *For more details, please refer to the PDF document or feel free to contact us.

Magnetic field distribution measurement device

The magnetic field distribution will be automatically measured by scanning with a Hall element!

We offer a "magnetic field distribution measurement device" that can rapidly scan between electromagnets and the magnetic flux trap state of superconducting bulk materials. The magnetic field distribution is visualized in 3D using computer software, allowing for immediate confirmation of the magnetic field distribution state. Hall elements are used for magnetic field measurement, enabling scanning even in ultra-low temperature conditions. Please feel free to contact us if you have any inquiries. 【Basic Specifications】 ■Movement Range: X, Y axis ±50mm or ±100mm, Z axis ±50mm ■Structure: 5-phase stepping motor with dedicated actuator ■Operating Resolution: 0.1mm ■Operating Probe: FRP support, Hall element ■Software: Sigma Koki SGEMCS or our original software, including PC and PCI/GPIB card *For more details, please download the PDF or contact us.

Kitagawa Gas Detection Tubes, Detectors, and Measuring Instruments Comprehensive Catalog

We have a wide range of Kitagawa-style gas detection tubes and related measuring instruments available!

This catalog provides a comprehensive introduction to the "Kitagawa-style" gas detection tubes, detectors, and measuring instruments handled by Komei Rika Kogyo Co., Ltd. It clearly presents the key points of the Kitagawa-style detectors, measurement methods using gas detection tubes, and the names of various parts of the gas detection tubes. Additionally, it introduces convenient measurement sets that utilize detection tubes, as well as measuring instruments for combustible gases, oxygen, and carbon monoxide. [Contents] ■ Gas Detectors ■ Portable/Handheld Gas Measuring Instruments ■ Fixed Gas Detection Alarms ■ Specific Applications ■ Related Materials *For more details, please refer to the PDF document or feel free to contact us.

Magnetic bearing characteristic measurement device

What we offer is almost an ONLY ONE product! Our in-house mechanical engineers are engaged in unique development.

We would like to introduce a case where we developed a magnetic bearing characteristic measurement device for research at a university under low-temperature conditions. Our company develops motors based on the development requirements provided by our customers, and we handle design and manufacturing. With flexible responses, we aim for suitable finished products. Please feel free to contact us when you need assistance. 【Case Overview】 ■ Equipment: Magnetic Bearing Characteristic Measurement Device ■ Application: For university research *For more details, please download the PDF or feel free to contact us.

KRM Series Comparison Quick Reference Table

Introducing the product's measurement radiation, equipment accuracy, dimensions, weight, and features!

This document includes a table comparing the specifications such as measurement targets and measurement ranges of the "KRM series." It introduces products like the "KRM311," which measures surface contamination, and the "KRM210/211," which measures ambient dose rate. The document is in a table format that clearly shows the differences between each product. Please take a moment to read it. 【Featured Products】 ■KRM311 ■KRM210/211 ■KRM231 ■4GMT02 *For more details, please refer to the PDF document or feel free to contact us.

High Temperature AC Hall Effect Measurement Device 'HALS-H II'

100V power supply specifications! A new measurement solution for evaluating next-generation power devices!

We offer the 'HALS-H II', which allows for easy measurement of the Hall effect in high-temperature environments anywhere and by anyone. This product can be used for the fundamental property evaluation of semiconductor materials such as power semiconductor materials, solar cell materials, and gas sensor materials. Please feel free to contact us if you have any inquiries. 【Features】 ■Low price ■High performance *For more details, please download the PDF or feel free to contact us.