Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
3151～3180 item / All 3805 items
Ideal for load testing of large-capacity motors such as geared motors.
This measuring device is suitable for load testing various large-capacity motors. It automatically controls the brake through software and measures torque, rotational speed, current, and voltage. By using a powder brake for the measurement load, we can offer large-capacity motor testing machines at a low price.
Measuring device for measuring the cogging torque of a motor.
We will rotate the unexcited motor at a constant speed and measure the relationship between magnetic pole torque and angle (θT). This is ideal for small DC motors and the detent torque of stepping motors.
![High-precision, non-contact straightness measurement device [Demo/test units available for loan]](https://image.mono.ipros.com/public/product/image/b60/2001262786/IPROS16222619914214986596.png?w=280&h=280)
Non-contact, high-precision straightness measuring device that does not damage the measurement target! Easy to install.
The straightness measurement device is a measuring instrument used for shape management. It can measure in the vertical direction, and models are available with measurement lengths ranging from 1000 to 3000 mm. Since the cross-sectional shape can be managed with numerical data, effective management of surface shapes can be achieved. In addition to the contact type, which has over 30 years of sales experience, we have added a non-contact type to our lineup in response to requests from the semiconductor industry. The main features are as follows: - High-precision straightness measurement is possible - Easy installation - Results can be visualized with dedicated software, allowing feedback to production - Bidirectional measurement is possible - Does not damage sensors or detected objects (non-contact type only) - Less affected by the hardness of the detected object (non-contact type only) We offer rental of test machines and assistance with evaluations.
Support stability within 0.003mm! Handy type internal and external diameter measuring instrument for the same dimensions, large quantity measurement, and on-machine measurement.
The "A Series" is a new model of the indicating measuring instrument that has been upgraded to include a built-in cross roller guide. The external dimensions and the measurement probe mounting dimensions are the same as the old type, allowing for smoother operation and improved stability, which enables long-term maintenance of accuracy. In addition, we also handle the external gear thickness measuring instrument "GTO-N," which is suitable for managing the tooth thickness dimensions of spur gears and helical gears, as well as the internal gear thickness measuring instrument "GTI-N" and the eccentricity measuring instruments "EM-1N/EM-2N." 【Features】 ■ Built-in cross roller guide ■ External dimensions and measurement probe mounting dimensions are the same as the old type ■ Smoother operation and improved stability for long-term accuracy maintenance ■ Support stability within 0.003mm *For more details, please refer to the PDF document or feel free to contact us.
Ideal for orientation! You can obtain more accurate data at a low cost.
This series consists of 10 volumes and is a video (DVD) that helps you better understand and use the "G2800TCD," "G2700TCD," and "G2700TF" by viewing it. It is suitable for gas chromatography operators, Yanako GC operators, and operators of our gas permeability measurement devices. Please feel free to consult us if you have any requests. 【Titles】 ■ Volume 1: Basics of Gas Chromatography ■ Volume 2: JIS Differential Pressure Method ■ Volume 3: JIS Isobaric Method ■ Volume 4: G2800TCD Detector ■ Volume 5: G2700TCD Detector ■ Volume 6: G2700FID Detector ■ Volume 7: GTR Gas (Differential Pressure Method) ■ Volume 8: GTR Water Vapor (Differential Pressure Method) ■ Volume 9: Gas and Water Vapor (Isobaric Method) ■ Volume 10: GTR Applications *For more details, please download the PDF or feel free to contact us.
Searching for and measuring the thickness of a lens that is only one point thick.
The "CTgauge" is a non-contact lens center thickness measurement device that utilizes a unique central thickness analysis method. It features a universal sample chuck mechanism that allows for free adjustment of sample diameters, accommodating sizes from φ10 to 100 mm (for sizes below φ10, individual holders are required). Please feel free to contact us if you have any requests. 【Features】 ■ Realizes "non-contact measurement" - Unique apex detection method and suppression of measurement errors ■ Mechanical mechanisms that meet demands - Measurement function for small diameter lenses and ΔH measurement function ■ Software that meets demands - Sample centering correction software, rough surface measurement - Sample collision prevention software, inspection report *For more details, please download the PDF or feel free to contact us.
High-performance eccentric measuring device for on-site use.
It is a transmission eccentricity measuring device capable of measuring a wide range of lens focal lengths from ± a few mm to infinity (plane).
Supports single-end measurements! A diverse lineup for mesh-type networks and more.
This product is a measurement device for wavelength dispersion (Chromatic Dispersion) and polarization mode dispersion (Polarization Mode Dispersion) in optical fiber transmission paths. We offer a variety of products, from long-distance transmission paths of 12,000 km to mesh networks that can measure up to 120 km in a single-ended configuration. Please feel free to contact us when you need assistance. 【Product Lineup】 ■FTB-5800 (FLS-5834A) ■FTB-5500B (FLS-5834A) ■FTB-5700 *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.
![[Measurement Field] Thermal conductivity of thin sheet samples, isotropic, anisotropic [TA]](https://image.mono.ipros.com/public/product/image/4d6/2001216632/IPROS74768513761039729099.jpeg?w=280&h=280)
Non-contact measurement of thermal diffusivity using a laser. Measurement of materials with high thermal conductivity is possible.
The ThermoWave Analyzer TA3 measures thermal diffusivity using a non-contact method with a laser. It is capable of measuring materials with high thermal conductivity. Measurements can be taken without worrying about the shape. For more details, please contact us.
![[Measurement Field] Thermal Conductivity of Sheet Materials Isotropic, Anisotropic [TA]](https://image.mono.ipros.com/public/product/image/3d3/2001216709/IPROS57530910294444192683.jpeg?w=280&h=280)
Non-contact measurement of thermal diffusivity using a laser. Measurement of resin-based materials is also possible.
The ThermoWave Analyzer TA measures thermal diffusivity using a non-contact method with a laser. Since the thermal conductivity of composite materials made of fillers and resins varies significantly with the mixing ratio, measuring thermal diffusivity is essential. Measurement of resin-based materials is also possible. Please contact us for more details.
![[Measurement Example] Thermal Conductivity of Thermoelectric Materials: Strontium Titanate [TA]](https://image.mono.ipros.com/public/product/image/25a/2001216791/IPROS60206001535058869691.jpeg?w=280&h=280)
It will help in the development of thermoelectric materials!
Energy conservation is a challenge that must be addressed throughout Japan and the world in the future, and it is expected that the development of thermoelectric materials will also accelerate within this context. In fact, our company has received numerous requests for measurements of thermoelectric materials. Since the earthquake, there has been a particularly increasing trend, and if our measurement technology can contribute to the world of energy conservation, we are willing to cooperate in any way possible.
![[Measurement Example] <LED Material> Measurement of Thermal Conductivity of Gallium Nitride (GaN)](https://image.mono.ipros.com/public/product/image/9a6/2001216793/IPROS35316899154734522910.jpeg?w=280&h=280)
Thermal evaluation of gallium nitride, known for blue LEDs and semiconductor materials!!
■Evaluation of particles with a micro size (3μm and above) ■Evaluation of thermal conductivity of thin films ■Measurement possible at submicron order
![[Measurement Example] <Insulation substrate material for electronic circuits> Thermal conductivity of polyimide sheet](https://image.mono.ipros.com/public/product/image/42e/2001224182/IPROS57312314899529954238.jpeg?w=280&h=280)
Thermal conductivity distribution measurement and the anisotropy of thermal diffusivity in each part can be evaluated.
Here is an example of evaluating thin polyimide sheets. Polyimide sheets are resin materials primarily used as insulating substrates and insulating layers in electronic circuits. This time, we measured the thermal diffusivity in the thickness direction using a ThermoWave Analyzer TA on a sheet with a thickness of 7.5 μm. Even with the same polyimide sheet, there are significant thermal differences depending on the thickness. When comparing examples of 25 μm and 7.5 μm using the measure of thermal diffusion time, there is nearly a tenfold difference. The thinner sheet diffuses heat in one-tenth the time. For in-plane measurements, it is relatively easy to achieve time resolution since the distance between the heating point and the detection point can be established. However, for thickness direction measurements, it is necessary to detect rapid temperature changes, which affects the basic performance of the equipment. Traditional measurement methods make the measurement itself difficult. Additionally, at a thickness of 7.5 μm, the thermal effects of surface blackening treatment cannot be ignored, so we have devised methods to minimize these effects during sample preparation and measurement. The measurement results are as follows: Thermal diffusivity in the thickness direction: 0.103 × 10^-6 m²s^-1. This value is approximately 30% lower compared to the 25 μm thick polyimide.
![[Measurement Example] <Fuel Cell Materials> Thermal Conductivity of Zirconia](https://image.mono.ipros.com/public/product/image/a2f/2001224194/IPROS22559859266065692730.jpeg?w=280&h=280)
Thermal conductivity can be measured non-contact! No surface treatment is required for carbon-based materials!
Yttria-stabilized zirconia is "an oxide based on zirconia, with the addition of yttrium oxide, which stabilizes the crystal structure of zirconia at room temperature." Applications include refractory materials, electrically conductive ceramics, materials for solid oxide fuel cell (SOFC) products, and due to its hardness and optical properties in single crystals, it is also used as a gemstone, such as cubic zirconia. In the case of fuel cell materials, thermal properties are important because the operating temperatures are high. Additionally, cubic zirconia closely resembles diamond and is often used as a diamond substitute. Like diamonds, it has a high refractive index, which gives it a sparkling appearance. The main difference lies in thermal conductivity. There are devices that can simply assess thermal properties to distinguish between diamond and zirconia. It seems that it is also used in thermal barrier coatings (TBC) for gas turbines. The measured result for thermal diffusivity was 1.13×10^-6 m^2s^-1. This value is 2 to 3 orders of magnitude lower compared to diamond. Our ThermoWave Analyzer TA allows for non-contact measurements. Many carbon-based materials can be measured without the need for surface treatment.
A fiber orientation evaluation system that is easy to analyze and understand! Anyone can safely perform measurements.
It is a unique device that evaluates the direction of fibers using heat flow. The 'TEFOD' is a fiber orientation evaluation system that can grasp the fiber state (orientation, relative comparison of quantity, variability) within a sample by utilizing heat flow. By observing heat flow, it allows for macro evaluation rather than micro evaluation. Evaluating the overall fiber orientation enables broader analysis. The measurement time is very quick at 1 minute (for one measurement point), and since it can be evaluated non-destructively, different evaluations can be performed on the same sample. The sample is spot-heated with a laser, and the heat transfer is observed using an infrared camera. By analyzing the observed infrared images, the thermal diffusivity can be quantified. Additionally, this product does not use X-rays, allowing anyone to perform measurements safely. 〇 About the Measurement Principle 〇 It is a type of periodic heating method called fiber orientation identification method. Spot periodic heating is performed, and the heat diffused in the plane direction is observed with an infrared camera at 360°. The thermal images obtained by the infrared camera are analyzed and quantified into thermal diffusivity. By converting it into a polar coordinate graph, the fiber orientation angle can be intuitively visualized.
Introducing devices for measuring the thermal diffusivity of sheet-like and plate-like materials, as well as thermal evaluation devices for fiber orientation distribution!
Introducing Bethel's thermal property measurement devices. The "Thermo Wave Analyzer TA33/35" is a measurement device for the thermal diffusivity of sheet and plate materials, capable of measuring the thermal diffusivity of functional materials. The "Thermal Microscope TM" has been commercialized through joint development with the National Institute of Advanced Industrial Science and Technology's Measurement Standards Division, allowing for measurements in micro-regions and thin films. Additionally, we offer the "Thermal Imaging Scope TSI," which visualizes thermal conduction paths using infrared cameras and lasers, as well as the "Fiber Orientation Evaluation System TEFOD." 【Features of the Thermo Wave Analyzer TA33/35】 ■ High freedom of sample shape ■ Dynamic range from organic films to diamonds ■ Anisotropy evaluation through measurements in horizontal and vertical directions ■ Evaluation of defects and irregularities through distribution measurements *For more details, please refer to the PDF document or feel free to contact us.
グラファイトシート、ダイヤモンド、CFRP、異方性／分布測定機能でパワーデバイスやAIチップの放熱用材料の熱伝導率測定に好適
EVやPHEVに使用されるパワーデバイスや生成AIの演算に用いられるAIチップの放熱対策は十分ですか！製品の環境性能と信頼性を高めるためには、放熱材料の熱伝導率を把握しなければなりません。 例えば、パワーデバイスの放熱や次世代半導体材料として注目されているダイヤモンドは、熱伝導率が高いため、従来の装置では熱伝導率の測定のために厚い試料の作成が必要でした。自動車関連、航空宇宙関連に使用されるCFRPは、材料自体の構造が複雑なため、熱伝導率の測定が困難でした。 本機なら、ほとんど全ての材料の熱伝導率が測定できます。 想定活用例： ・厚み方向と面内方向の熱伝導率異方性測定 ・熱伝導率分布測定（TA35） ・温度を変えた熱伝導率の測定（オプション） ・薄くて熱伝導率の高い材料の測定 ・放熱材料の開発のための熱伝導率測定 測定対象例： ・半導体材料（SiC、GaN、GaO、ダイヤモンド等） ・電子基板回路材料（ガラエポ、ポリイミドシート、AlN、SiC等） ・放熱材料（グラファイトシート、Al、Cu、ダイヤモンド等） ・複合材料（GFRP、CFRP、各種TIM、高熱伝導性樹脂等）
It is possible to measure the thermal permeability and thermal conductivity of thin film micro-regions, such as alumina fillers and the electrode parts of semiconductor lasers!
This catalog is for the product "Thermal Microscope TM3B." It is capable of measuring thermal permeability at the micrometer scale and is suitable for measuring the thermal permeability and thermal conductivity of fillers and thin films. It also includes features, measurement principles, and device configurations. Please feel free to download and take a look. [Contents] ■ Features ■ Measurement Principles ■ Device Configuration ■ Measurement Examples ■ Specifications *For more details, please refer to the PDF document or feel free to contact us.
Adopts a color LCD and touch panel! Condenses various functions into a stylish design.
The "UCAM-80A" is a high-precision, universal input, multi-channel strain measurement device. It features a new user interface displayed with text and pictograms, making it easy to see on-site and providing excellent usability for intuitive operation. A single data logger can support up to 30 channels, and with a scanner connection, it can accommodate up to 1000 channels. 【Features】 ■ Touch panel adopted ■ High precision, capable of handling large strains ■ Improved cable management ■ Built-in printer ■ New software ■ Up to 1000 channels *For more details, please refer to the PDF materials or feel free to contact us.
Samples with concentrations below 1 ppm can also be measured! Achieving a wide range and real-time evaluation of dispersion and aggregation characteristics.
The "SALD-7500nano" is a nanoparticle size distribution measurement device that measures fine bubbles ranging from 100nm to 60μm and traces changes in bubble diameter in real-time. It accurately and sensitively measures the particle distribution of low-concentration nanoparticles and highly light-absorbing nanoparticles. This device utilizes the "nanoparticle size distribution measurement device" manufactured by Shimadzu Corporation, a company with overwhelming demand as an analytical measurement instrument manufacturer. 【Features】 ■ Measures fine bubbles from 100nm to 60μm ■ Accurately and sensitively measures the particle distribution of low-concentration nanoparticles and highly light-absorbing nanoparticles ■ Capable of measuring low-concentration samples of less than 1ppm ■ Utilizes the "nanoparticle size distribution measurement device" manufactured by Shimadzu Corporation *For more details, please refer to the PDF document or feel free to contact us.
We can make the total organic carbon (TOC) measurement of that place we wanted to measure more accessible.
The "Akyura Mini α" compact TOC continuous measurement device is a handheld TOC continuous measurement device that miniaturizes the technology of the conventional Akyura series and incorporates automated flow control to achieve TOC measurement with less sample flow, making TOC measurement more accessible and easier with one-touch operation.
A lineup of six types of portable water quality analyzers that support the analysis of various water quality components.
The portable water quality analyzer "HS-1000 series" offers a lineup of six types of portable water quality analyzers that are capable of analyzing a wide variety of water quality components. Simple analysis by just placing the sample in a dedicated reaction reagent kit. Lineup: ■ Multi-parameter water quality analyzer HS-1000Plus ■ COD analyzer HS-1000COD ■ Seawater quality analyzer HS-1000SW ■ Groundwater quality analyzer HS-1000GW ■ Drinking water quality analyzer HS-1000DW ■ Boron and fluoride analyzer HS-1000BF
Condensed 42 types of water quality component analyzers into a compact body the size of B5!
This is a multiparameter water quality analyzer capable of analyzing 42 items with a single unit. It can be used for various applications such as raw water management, manufacturing management, and wastewater management. ■ Main Features - Battery-operated (with remaining charge display) - Printer connection available - Low price - Calibration curve addition possible ■ Lineup - Multiparameter Water Quality Analyzer HS-1000Plus - COD Analyzer HS-1000COD - Seawater Quality Analyzer HS-1000SW - Groundwater Quality Analyzer HS-1000GW - Drinking Water Quality Analyzer HS-1000DW - Boron and Fluorine Analyzer HS-1000BF
A compact housing in half size (1/8 DIN) that consolidates the functions necessary for process monitoring.
The half-size process conductivity/resistivity monitor "EC-410 / EC-430" is designed to enable easy process monitoring with a wide range of electrodes suitable for various water treatment processes and a simple monitor. ■ Main Features - By switching measurement modes, one monitor can measure both conductivity and resistivity. - It covers a wide range from 0.00μS/cm to 200.0mS/cm, making it suitable for various applications. - It is equipped with an insulated 4-20mA analog output, allowing for easy remote monitoring and control. - The EC-430 comes with a relay output for alarms. 8 Types of Electrodes - There are four types of electrodes for pure water resistivity and low conductivity measurement (with low cell constants) and four types of electrodes for high conductivity and high temperature (with high cell constants), allowing users to select the appropriate electrode for their application. - An integrated temperature sensor measures the water temperature and displays temperature-compensated readings at 25°C. The temperature compensation includes automatic temperature compensation at 25°C (temperature coefficient 2%/°C: adjustable) and dual temperature compensation for pure water.
Measurable down to a level of 0.3 for particles below PM2.5!
We offer a digital sensor capable of detecting fine particles in the air, the "Compact Fine Particle (PM2.5) Measuring Device." It is equipped with a built-in laser and photoelectric receiver. The intensity distribution pattern of the diffracted and scattered light emitted from fine particulate matter allows us to determine the particle size distribution. Additionally, it can convert the data into an electrical signal through photoelectric conversion, enabling the calculation of fine particulate matter concentration using an algorithm. 【Features】 ■ Compact and lightweight design (48mm×40mm×13.5mm, 25g) ■ Operating voltage: DC5V±0.5V ■ Operating environment: -15℃ to 60℃ ■ Minimum detectable particle size: 0.3μm *For more details, please download the PDF or feel free to contact us.
