弘輝テック List of Products and Services

The "DS-11S" is a dip tester that enables batch measurement of the information necessary for managing selective soldering equipment by using a dedicated program. Without the need for a PC, all results can be checked on the display of the main unit. It can accommodate up to five nozzles, even in devices with multiple nozzles, and individually assesses the condition of each nozzle. Please feel free to contact us when needed. 【Features】 ■ Automatically determines preheat and solder temperature, XY speed, and XY nozzle solder dimensions ■ Allows for pass/fail judgment and management of measurement results using dedicated software ■ Can individually assess the condition of up to five nozzles, even in devices with multiple nozzles ■ All results can be checked on the main unit's display without using a PC *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment
• Other measurement, recording and measuring instruments

The DS-11 is a dip tester that allows for measurement by simply placing the necessary information for managing flow soldering equipment on a conveyor. It comes with a cooling stand that enables quick cooling of the device and can also be used as a stand to protect the sensors. Additionally, we offer a heat-resistant cover as an option that can accommodate high thermal loads, such as preheaters. Please feel free to contact us if you need it. 【Features】 ■ USB connection allows for the use of the included software to determine and manage measurement results. ■ Temperature profile measurement function enables monitoring of temperature profiles with 0.1-second sampling from preheat and solder temperature sensors. ■ An optional heat-resistant cover is available to accommodate high thermal loads, such as preheaters. ■ A stand is included to cool and protect the sensor part after measurement. *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment
• Other measurement, recording and measuring instruments

At the "KOKI TEC ASIA Exhibition Hall," you can verify soldering quality using reflow soldering, post-process soldering inspection, inline and tabletop selective soldering equipment. We offer operational training, soldering quality improvement, and maintenance (solder pot overhaul) training. Location: 5 minutes by car from BTS Udomsuk Station in Bangkok, located on Udomsuk Soi 31. 【Our Services】 ■ Manufacturing of automatic soldering equipment ■ After-sales service/training ■ Experiments (temperature profiles, soldering quality verification)/training (overhaul procedures, soldering teaching program creation procedures) *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment

We would like to introduce our appearance inspection machine, the 'SE1000/100'. The "SE1000" is equipped with an optical camera unit that achieves high-precision inspection, and it realizes high-speed inspection with a linear motor and a high-rigidity frame. The "SE100" features a compact body. Typical defect detections include scratches, dents, chips, voids, rust, and excessive material. 【Software Options】 ■ Offline system software ■ Repair system software ■ CCC ■ SPC ■ QT *For more details, please download the PDF or feel free to contact us.

• Other inspection equipment and devices

The "RV Series" is a smart board appearance inspection machine that combines inspection and measurement functions. The high-speed 3D compatible models "RV-2-3DHL" and "RV-2-3DH" utilize a 12-megapixel high-resolution camera, which expands the camera's field of view by 192% compared to previous models. Additionally, the template mode, which is easy and quick to use while achieving high inspection performance, allows users to select the inspection component type using pre-prepared templates, automatically detecting shapes and leads and generating packages. 【Lineup】 ■RV-2-3DHL ■RV-2-3DH ■RV-2 *For more details, please download the PDF or feel free to contact us.

• Other inspection equipment and devices

Koki Tech Co., Ltd. will be exhibiting at the 'JISSO PROTEC 2025 (26th Assembly Process Technology Exhibition)' held at Tokyo Big Sight. This exhibition is a comprehensive showcase of electronic component assembly technology. Advanced technologies related to electronic component assembly, which are essential for the electronics society, will be gathered in one place. We plan to showcase our all-in-one selective soldering machine model "NEO-L Smart (with IPH)" among others. We understand you are busy, but we kindly ask for your visit. 【Exhibited Equipment】 ■ All-in-one selective soldering machine model "NEO-L Smart (with IPH)" ■ Infrared and hot air circulation reflow oven "VFR-408N" ■ Desktop selective soldering machine "ULTIMA-TRZ" ■ Desktop selective spray machine "ULTIMA-SPZ" ■ Doctor Palette ■ Inline selective soldering machine "SELBO III" *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment
• Reflow Equipment

"Dr. Palette" is an automatic adjustment unit for selective soldering equipment that realizes the automation of nozzle position (reference position) adjustment and the inspection automation of nozzle shape abnormalities. It conducts a wave roughness inspection (wave alignment) of the jet from a top view. Inspection data can be saved and traced through images. Additionally, it is equipped with an automatic wave height adjustment function (OP). 【Features】 ■ Position correction camera and nozzle position adjustment ■ Automatic wave height adjustment function ■ Communication via Wi-Fi connection *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce our product, "Soldering EYE." All soldering images are recorded and saved to a NAS. Production management data can be searched using barcodes, allowing for visual selection by clicking on the desired area. Please feel free to contact us when you need assistance. 【Features】 ■ Video recording of each step with a camera ■ Data searchable by barcode ■ Click on defective areas to play the video ■ Image data is saved to NAS *For more details, please download the PDF or feel free to contact us.

• Other image-related equipment

We would like to introduce our tabletop selective soldering series, 'ULTIMA-TRZII/SPZII'. The board thickness ranges from 0.8 to 2.0 mm, and the nozzle is a two-fluid nozzle with an inner diameter of φ2 to 20 mm (standard specification) / air jet (optional). Please feel free to contact us when you need assistance. 【Specifications of ULTIMA-TRZII (excerpt)】 ■ Equipment dimensions: W620×D940×H442(mm) [for reference] ■ Power supply: Single-phase AC200V±5% 4kVA ■ Equipment weight: Approximately 120kg [for reference] ■ Notes: Nitrogen supply rate (reference value) 25L/min (0.4 to 0.5MPa) *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment

The "ULTIMA-NEO-L Smart" is a selective soldering device that has achieved miniaturization compared to the conventional model NEO-L. The reduction in size has led to a 10% decrease in power consumption. The spray and solder pot have been consolidated into one unit, improving convenience. Additionally, easy data creation is possible (anyone can do it). It can be equipped with the new feature "Preheating Unit IPH" (optional). 【Specifications (excerpt)】 ■ Device dimensions: 1150(L)×1250(W)×1050(H)mm ■ Board size: 50(W)×50(L) to 380(W)×460(L)mm ■ Maximum board weight: 2kg ■ Component height: Upper 50mm, Lower 25mm (or less) ■ Air supply volume: 0.4-0.5MPa 50L/min *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment

This catalog introduces the products handled by Koki Tech Co., Ltd. It features various products such as "SpROBO," which applies flux efficiently under optimal conditions, and "NEO-L," which integrates a spray fluxer and solder pot into one unit. Details about each product's specifications and features are included, so please make use of this information when selecting products. [Contents] ■ Selective Soldering Series (Desktop/All-in-One) ■ Selective Soldering Series (Inline) ■ Wave Soldering Series ■ Far Infrared Combined Hot Air Circulation Reflow Oven VFR Series ■ Other Lineup ■ Peripheral Equipment *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment

Koki Tech Co., Ltd. will be exhibiting at the "39th NEPCON Japan Electronics Development and Manufacturing Expo" held at Tokyo Big Sight. We plan to showcase a total of six pieces of equipment, including the "VFR-408N," which reduces flux cleaning, and the innovatively designed "ULTIMA-TRZ." We look forward to your visit. 【Exhibition Overview】 ■ Exhibition: 39th NEPCON Japan Electronics Development and Manufacturing Expo ■ Date: January 22 (Wed) - 24 (Fri), 2025, 10:00 - 17:00 ■ Location: Tokyo Big Sight, East Hall 1 ■ Booth Number: East 1E4-2 ■ Admission Fee: Free (Pre-registration required) *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment

We would like to introduce our "Inline Selective" product. By using barcode and two-dimensional code management, or automatic stage change through substrate layout image recognition, along with the same frame jig for transportation, mixed production of a wide variety of small lots is possible. We offer a lineup that includes the one-frame types "EQS-350SDDD" and "EQSS-350SD+M," as well as the modular type "SELBO II." 【Features】 ■ Mixed production for small lots and a wide variety ■ All stages operate simultaneously ■ Tact balance can be set ■ To prevent temperature drop, it waits before the preheating zone *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

We would like to introduce our tabletop selective soldering series 'SPROBO & TAKUROBO' that we handle. We offer the spray fluxer "ULTIMA-SSP 'SPROBO'", the soldering device "ULTIMA-TRZ 'TAKUROBO'", and the preheater unit "PHS-430A". The benefits of implementation include cost reduction of materials and improvement and stabilization of quality. 【Features】 ■ Space-saving and energy-efficient ■ Production of a wide variety of small lots ■ Lightweight and layout-free ■ Compatible with M-size PCBs ■ Cell production compatible ■ Easy operation and program creation *For more details, please refer to the PDF materials or feel free to contact us.

• Soldering Equipment

We would like to introduce our new reflow model, the "VFR Series." With a special far-infrared panel heater and hot air circulation method, it enables temperature profile settings comparable to hot air reflow. Additionally, it improves wettability and suppresses voids, preventing chip standing, flying, and misalignment through hot air balance. 【Features】 ■ Special far-infrared panel heater and hot air circulation method ■ Dual configuration of single lane ■ High-efficiency insulation structure reduces heat loss (furnace surface temperature below approximately 40°C) ■ Low nitrogen consumption (below 1000ppm at 250NL/min) ■ Water-cooled radiator cooling mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Reflow Equipment

The "N2 IMPACT II" is a nitrogen gas generation device with a built-in compressor that enables significant reductions in driving power due to its energy-saving program. In conventional models, the driving power remained constant even if the usage of N2 gas decreased, but in this series, energy-saving operation can be selected according to the usage flow rate by automatically calculating the N2 gas usage and control process in a stepless manner. Improvements in the N2 generation process have allowed for the use of compressors with the same motor output as existing series, achieving an increase in N2 gas generation by up to 27.3%. 【Features】 ■ Reduction of up to 49% in power consumption based on nitrogen gas usage ■ Up to 27.3% increase in N2 generation ■ Ability to operate the device with external air supply ■ Improved maintainability, reducing effort and costs ■ Adoption of scroll compressors for low vibration and low noise *For more details, please refer to the PDF materials or feel free to contact us.

• Nitrogen Gas Generator

The "NE-II Series" is an energy-saving nitrogen gas generation device that achieves a generation capacity of 20-180 Nm3/h with a compact housing design. Through process improvements, the nitrogen generation capacity has been increased by approximately 36.5% compared to conventional models. With the adoption of panel doors, the maintenance space required on the front, back, and sides is only 600mm, eliminating unnecessary installation space and consolidating the maintenance area on the right side of the device. As a result of the increased nitrogen gas generation, the power required to produce 1m3 has been reduced by up to 26.4%. 【Features】 ■ Achieves a generation capacity of 20-180 Nm3/h with a compact housing design ■ Nitrogen generation capacity increased by approximately 36.5% compared to conventional models due to process improvements ■ N2 generation capacity increased by up to 36.5% ■ Power consumption per 1m3 reduced by up to 26.4% ■ Maintenance space on the front, back, and sides is only 600mm due to the adoption of panel doors *For more details, please refer to the PDF document or feel free to contact us.

• Nitrogen Gas Generator

We would like to introduce the soldering equipment we handle. The Selective Soldering Series (Desktop/All-in-One) "SpROBO" and the module-connected type "SELBO II" of the Selective Soldering Series (Inline), as well as the Wave Soldering Series "VIS-400," are included in our lineup. The Selective Soldering Series (Desktop/All-in-One) features a reduction in soldering defects and a decrease in waste solder. [Features of the Selective Soldering Series (Desktop/All-in-One)] ■ Desktop solder pot unit ■ Reduction in soldering defect rates ■ Replacement of soldering iron processes ■ Reduction of waste solder (decrease in dross) ■ Can be swapped with a pre-solder pot *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

We would like to introduce our tabletop selective spray device, 'ULTIMA-SSP', which we manufacture. Since its launch in 2008, this product has received great acclaim, and the latest model is the "ULTIMA-SSP." It significantly contributes to the streamlining of manual processes when combined with "TakuROBO." 【Features】 ■ Space-saving and energy-efficient ■ Suitable for small lot production of various types and cell production ■ Significant increase in production efficiency when combined with TakuROBO - Production volume: 1300 units/day ⇒ 1500 units/day - Number of operators: 6 ⇒ 2 - Material usage: 18Kg ⇒ 4Kg (Compared to manual processes) ■ Compatible with the program creation system Freedom (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

We would like to introduce our tabletop selective soldering machine, 'ULTIMA-TRZ', which we manufacture. Since its launch in 2008, this product has received great acclaim, and the latest model is the "ULTIMA-TRZ." It significantly contributes to the streamlining of manual soldering processes when combined with the "ULTIMA-SSP." 【Features】 ■ Replacement of soldering iron processes, reduction of soldering defects ■ One-touch easy operation ■ Space-saving and energy-efficient ■ Suitable for small lot production and cell production of various types ■ Significant increase in production efficiency when combined with ULTIMA-SSP ・Production volume 1300 units/day ⇒ 1500 units/day ・Number of operators 6 ⇒ 2 ・Material 18Kg ⇒ 4Kg (Compared to manual soldering processes) ■ Compatible with the program creation system Freedom (optional) ■ Can be switched to a spare solder pot *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The "N2 Reflow Device VFR-4010N" is a unit that combines a unique heating method using a special far-infrared panel heater along with hot air circulation. Depending on the substrate (thickness) and mounted components, it is possible to utilize not only hot air circulation but also the advantages of far-infrared effects for production. This device is designed with consideration for substrates and components. 【Features】 ■ Hot air circulation reflow oven with far-infrared combination ■ Adoption of special far-infrared panel heater ■ Minimizes flux accumulation in the oven, extending maintenance intervals ■ Special filter for mist recovery in the oven (can be reused after cleaning) ■ Energy-saving through reduced heat loss with high-efficiency insulation structure *For more details, please refer to the PDF materials or feel free to contact us.

• Reflow Equipment

The "VIS-400" is a spray flux application device in the wave soldering series that can spray environmentally friendly VOC-free flux. It employs a spray gun capable of ultra-low pressure micro-application. By combining high-speed swing control of a servo motor, it achieves uniform flux application. Furthermore, the adoption of a flux application mechanism from an ultra-close distance eliminates blind spots caused by component heights such as QFP and SOP, allowing for flux application to the back of the leads, significantly improving application efficiency. 【Features】 - Enables uniform flux application - Utilizes a spray gun capable of ultra-low pressure micro-application - Greatly reduces mist scattering and particle rebound outside the substrate - Decreases the amount of flux adhering to the inside of the device - Reduces cleaning maintenance frequency and flux usage, contributing to material cost savings *For more details, please refer to the PDF document or feel free to contact us.

• Other surface treatment equipment

The WS-401LF is an automatic soldering machine from the wave soldering series, equipped with the minimum necessary specifications as a "standard model" compatible with lead-free solder. To address the corrosion of the solder pot caused by lead-free solder, the interior of the solder pot is made of custom cast material with ceramic treatment, and the jet nozzle and duct are treated with a corrosion-resistant surface. Additionally, by adjusting the solder release angle and flow rate at the peel-back point, control over the fillet shape has become possible. 【Features】 ■ "Standard model" compatible with lead-free solder ■ Incorporates ceramic treatment in custom cast material ■ Jet nozzle and duct feature corrosion-resistant surface treatment ■ Control over fillet shape is possible *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The "ULTIMA-NEO-L" is a standalone device that performs both flux application and soldering in one unit. With reliable solder contact to leads and patterns through point jet flow and optimal soldering conditions for each component, it achieves stable quality (such as T/H up). By upgrading from the standard 16kg solder capacity tank to the optional 32kg tank, a wider area corner nozzle can be used, allowing for reduced cycle times through extensive soldering, enabling nozzle selection according to application needs. 【Features】 ■ Long-selling device compatible with L-size PCBs ■ Standalone device that performs both flux application and soldering in one unit ■ Equipped with a touch panel and PC for easy and clear operation ■ By using the optional teaching function, all processes from scanning PCB data to creating flux application and soldering data can be completed within the device *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The inline selective soldering device 'SELBO-II' is a new model that inherits the performance of the conventional EQS series and has evolved further. By modularizing the processes of flux application, preheating, and soldering, we have increased the flexibility of the device configuration, making it possible to change layouts after installation and to re-install due to transitions in the production site, which was difficult with typical inline machines. It can accommodate the customer's production style without stress. The quality of soldering, which is particularly important, can achieve high quality and stable soldering as it uses the same soldering pot as the well-regarded TR series. Compared to large inclined soldering devices, it features an energy-saving design that significantly reduces electricity costs and unnecessary material costs (flux, solder), thereby lowering production costs. The device itself generates little heat, contributing to the improvement of the production environment and supporting SDGs. 【Features】 ■ Flexibility in production layout ■ Capable of handling a variety of products and small lot production ■ Stable production guaranteed with a variety of optional features *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

We will be exhibiting at the "Implementation and Assembly Process Technology Exhibition 2024" held at the Nagoya City Small and Medium Enterprise Promotion Hall. This exhibition specializes in post-process automation and will showcase new equipment aimed at labor-saving solutions from major domestic equipment manufacturers. We sincerely look forward to your visit. 【Event Overview (Excerpt)】 ■ Dates: July 10 (Wednesday) - July 11 (Thursday), 2024 ■ Hours: 10:00 AM - 5:00 PM *Last admission at 4:00 PM ■ Admission Fee: Free - General visitors: No registration required for factory representatives from manufacturing industries or equipment/product users (please submit 2 business cards at the reception) - Trading companies: Pre-registration is required *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Machine
• Other assembly machines

The "SELBO-III" is a high-quality selective soldering machine that enables flexible configurations. It allows for a random layout configuration of up to 10 modules (e.g., 2 Fluxers, 2 Preheaters, 6 DIP Tanks). With easy switching of the transport direction, you can rearrange the line layout without purchasing new equipment. 【Features】 - A non-stop system that allows maintenance during production to improve operational efficiency. - Co-developed with DynaTron, the Freedom software for creating soldering programs. - Inlet and outlet conveyor units. - Capable of mounting either a two-fluid nozzle or an air jet nozzle. - Rapid heating lamp heaters enable a reduction in preheating time. *For more details, please feel free to contact us.

• Soldering Equipment

"Freedom" is a program creation system that generates soldering programs based on CAD data standards, automatically optimizing preheating/spray time and soldering paths. It automatically selects nozzle diameter and operation from the board layout information. It can automatically check for interference based on the clearance between the nozzle and surrounding components. 【Features】 ■ Soldering path optimization ■ Profile creation ■ Component interference check ■ Component library function *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The "EQS-350" is an inline standard type point soldering device. It controls the necessary amount of solder, thermal capacity, and time for each soldering point, allowing for optimal "soldering conditions" to be set. Using the "dedicated software" (O/P), images captured by a scanner and Gerber data from PCB design can be displayed to generate a "soldering" program. 【Features】 ■ High quality ■ Simplification of NC software creation ■ Improved productivity through the expansion of the "soldering tank module" *For more details, please refer to the PDF materials or feel free to contact us.

• Soldering Equipment

The EQSS-350SD is a space-saving inline model point soldering device. By adding an expansion unit to the "solder pot module," production efficiency is improved. The adoption of a two-dimensional code enhances the automatic changeover system and mixed production capabilities, improving production operating rates. 【Features】 ■ By setting the maximum substrate size of 350mm horizontally, the length of the spray and preheating dip device is reduced to 1600mm (excluding the feeder conveyor) for space-saving. ■ The addition of an expansion unit to the "solder pot module" improves production efficiency. ■ The use of a two-dimensional code enhances the automatic changeover system and mixed production capabilities, improving production operating rates. ■ Production management (traceability) supports quality control. *For more details, please refer to the PDF materials or feel free to contact us.

• Soldering Equipment

The "GFL-350N" is a lead-free nitrogen soldering device with an open dome structure that does not have a curtain, accommodating component heights of up to 100mm. It supports model switching and traceability through two-dimensional codes and other means. The nitrogen dome is equipped with a mist collection and clean substrate cooling mechanism. 【Features】 ■ Open dome structure without a curtain, accommodating component heights of up to 100mm ■ Stable low oxygen concentration with a dome internal pressure adjustment structure at the entrance and exit ■ Jet flow mechanism that reduces solder dross generation and suppresses solder hole occurrence ■ The warpage prevention unit for the solder bath section operates externally without opening the dome (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The "LMFS-400" is a soldering device that can handle processes from partial dip to full dip using a 4-axis peel-back mechanism. By adopting a high-performance (low pressure, fine particle) spray nozzle, it achieves a coating efficiency of over 70% and good through-hole fill. After soldering, cooling fans are placed in two locations: the descending lifter section and the bottom return conveyor section. 【Features】 ■ Spray Fracture ■ Preheating ■ Soldering ■ Cooling ■ Monitor *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The "SOFR-400" is an overflow-type automatic soldering machine that allows for the selection of four DIP methods. The production method can be chosen between inline compatibility and cell production compatibility (return back). In the peel-back DIP method, four electric cylinders are used, allowing for peel-back at angles of up to 4 degrees. 【Features】 ■ Four DIP methods can be selected ■ N2 supply is conducted simultaneously from four locations: the substrate transport section and the side of the solder tank, creating an N2 curtain that covers the solder surface ■ The production method can be chosen between inline compatibility and cell production compatibility (return back) ■ Compact design achieves space-saving *For more details, please refer to the PDF materials or feel free to contact us.

• Soldering Equipment

The collaborative project "MUSUBI," which hosts the Implementation and Assembly Process Technology Exhibition, has established an "experimental lab" in the Kansai region, not just a showroom, with seven equipment manufacturers. We invite you to bring your circuit boards to the lab and conduct verifications and experiments using the manufacturers' products. 【Hiroki Tech Showroom Equipment】 ■ Desktop Point Jet Soldering Device ■ Desktop Point Flux Application Device ■ All-in-One Point Jet Soldering Device *For more details, please refer to the PDF materials or feel free to contact us.

• Technical Seminar
• Soldering Equipment
• Circuit board processing machine

Koki Tech Co., Ltd. will be exhibiting at the "38th Internepcon Japan Electronics Manufacturing and Packaging Exhibition" held at Tokyo Big Sight. The exhibition will take place over three days from January 24 (Wednesday) to January 26 (Friday), 2024, and our booth will be located at "East 1E4-48." We will showcase equipment such as the far-infrared combined hot air circulation reflow oven "VFR-408N" and the inline selective soldering machine "SELBOIII." 【Event Overview】 ■ Date: January 24 (Wednesday) to January 26 (Friday), 2024 ■ Venue: Tokyo Big Sight ■ Booth Number: East 1E4-48 *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

This package is a reliable option entrusted to professionals, ensuring quality maintenance at a great value under appropriate conditions. Our skilled staff, equipped with advanced skills and extensive knowledge, will carry out the maintenance. We will conduct diagnostic maintenance at a great package price. Please feel free to contact us when you need our services. 【Features】 ■ Maintenance by professionals ■ Great package pricing ■ High-quality genuine parts ■ Advance notice for regular inspections *For more details, please refer to the PDF document or feel free to contact us.

• Other services

The "IPH (Induction Heating Preheat Function)" is based on proven heating nitrogen (N2) and point flow methods, and combined with induction heating (IH) preheating, it can efficiently heat and solder patterns and electrodes with large thermal capacities. With heated N2, through-hole ups that typically take time can be completed in a short period. It avoids insufficient heating, reduces solder temperature bath temperatures, and allows for transition to small-diameter nozzles. 【Features】 ■ Heats (generates heat) the patterns or electrode leads that need to be heated ■ IPH On/Off settings and On time can be configured for each step ■ Significantly reduces thermal stress on surrounding components *For more details, please refer to the PDF materials or feel free to contact us.

• Soldering Equipment

The "ULTIMA series" is easy to handle and designed for tabletop use. It addresses the shortage of manual soldering workers and quality instability by replacing them with automated soldering equipment. (Method) Flux application (SPZ) → Preheating (PHS) → Soldering (TRZ) *Material handling is done by the operator. Automation of flux application from manual to automated, reduction of flux liquid volume through uniform application, quality improvement, and labor saving are possible. To accommodate increased production, adding a soldering tank (TRZ) allows for easy and cost-effective solutions. *There are many cases where one operator can handle up to the maximum soldering tank capacity (depending on the circuit board). Please feel free to contact us when you need assistance. 【Features】 ■ High-efficiency flux application under optimal conditions ■ Easy numerical management with OP digital flow display ■ Preheating device (PHS) available for reducing soldering time and effective for solder rise ■ A variety of nozzles necessary for soldering can be selected ■ Stable soldering quality, quality improvement, and labor saving are possible *For more details, please refer to the PDF materials or feel free to contact us.

• spray

The "VFR Series" is a reflow oven that utilizes a special far-infrared panel heater and hot air circulation system. It minimizes flux adhesion inside the oven, achieving extended maintenance periods. It also allows for mist recovery with a special filter (the filter can be reused after cleaning). Please feel free to contact us when you need assistance. 【Features】 ■ Special far-infrared panel heater and hot air circulation system ■ Minimizes flux adhesion inside the oven, extending maintenance periods ■ Mist recovery with a special filter (the filter can be reused after cleaning) *For more details, please refer to the PDF document or feel free to contact us.

• Reflow Equipment

The "SELBOIII Series" is an inline selective soldering device that can add modules according to production volume. It improves soldering quality and reduces solder defects. Additionally, the optional substrate warpage correction function prevents nozzle contact. It also features various functions such as an air jet nozzle and a selective soldering bath. 【Features】 ■Improves soldering quality and reduces solder defects ■Supports labor-saving and automation in an inline format ■Can add modules according to production volume ■Layout changes possible with modular configuration ■Non-stop maintenance system (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

Are you having trouble with leak testing? ▶ I want to introduce a helium leak tester at a low cost as much as possible. ▶ I want a small-sized tester instead of large equipment, and I want to shorten the inspection time. ▶ I want to introduce custom-made equipment because off-the-shelf products do not meet our internal standards. Wano Kogyo's helium leak testers: ▶ Achieve low prices! ▶ Reduce equipment size and shorten cycle time. ▶ Custom-made equipment production. *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices